journal article·2018-07

Correlation between fracture mechanisms and microstructure in Mn powder metallurgy steels susceptible to intergranular failure

Simon Gélinas, Ian Baïlon-Poujol, Carl Blais

Publisher page

Abstract

Abstract This study was undertaken to thoroughly characterize the relationship that exists between microstructure, strength and fracture mechanisms of Fe-Mn-C powder metallurgy steels. Indeed, up to now the peculiar fracture behaviour of PM components made from this metallurgical system was not clearly understood by the PM community. A design of experiments (DOE) approach was used to determine the effect of chemical composition on tensile properties of Fe-Mn-C PM steels components and therefore on the fracture mechanisms leading to failure. Quantitative data describing fracture mechanisms as a function of sintered microstructure were obtained and compared against tensile strength measurements. Results led to the identification of microstructural conditions for which Fe-Mn-C PM steels are susceptible to the detrimental effect of Mn-oxide inclusions. It was found that the presence of martensite having a hardness higher than 661 HV exacerbates the detrimental effect of inclusions present in sinter necks, which explains the decreasing tensile strength observed with increasing carbon concentration. The beneficial effect of the divorced eutectoid phase as a secondary microstructural constituent is also discussed. Knowledge generated regarding the fracture behaviour of components made from this family of PM alloys allowed for the optimization of the volume fraction of microstructural constituents to maximize tensile properties. This work provides information that was missing up to now regarding the capabilities and limitations of admixed Mn PM steels in terms of tensile properties and allows the formulation of design guidelines to alleviate the adverse effects of Mn oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Infomine, 〈http://www.infomine.com/investment/〉 (Accessed 10 January 2018).
2. Totten · 2006
3. Šalak · 2012
4. F. Chagnon, L. Aguirre, A new approach to lean alloy PM steels, in: Proceedings of International Conference on Powder Metall. Part. Mater., MPIF, Chicago, IL, 2013, pp. 78–87.
5. Lean alloys in PM: from design to sintering performance10.1179/1743290112Y.0000000016 ↗
6. F. Chagnon, J. Campbell-Tremblay, C. Blais, Effect of carbon, manganese and chromium concentrations, densities, sintering temperatures and post-sintering cooling rates on properties of lean alloy PM steels, in: Proceedings of International Conference on Powder Metall. Part. Mater., MPIF, Orlando, FL, 2014, pp. (10) 162–176.
7. Leaner alloys for the PM industry10.1179/0032589912Z.00000000054 ↗
8. Critical aspects of alloying of sintered steels with manganese10.1007/s11661-010-0357-5 ↗
9. Manganese sublimation and carbon ferromanganese liquid phase formation during sintering of premixed manganese steels
10. Industrial processing, microstructures and mechanical properties of Fe–(2–4)Mn(–0.85Mo)–(0.3–0.7)C sintered steels10.1179/003258904225015518 ↗
11. Effect of additional alloying elements on the properties of sintered manganese steels10.1179/pom.1975.18.35.014 ↗
12. Tailoring master alloys for liquid phase sintering: effect of introducing oxidation-sensitive elements10.1080/00325899.2016.1148897 ↗
13. Effect of processing conditions on microstructural features in Mn–Si sintered steels10.1016/j.matchar.2014.06.011 ↗
14. Tensile properties of Fe-3Mn-0·6/0·7C steels sinteredin semiclosed containers in dry hydrogen, nitrogen and mixtures thereof10.1179/003258903225005312 ↗
15. Sintering, microstructure, and mechanical properties of PM manganese–molybdenum steels10.1179/003258900666087 ↗
16. Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powders10.1179/003258905X37567 ↗
17. Effect of manganese content and manganese carrier on properties of sintered and sinter hardened hybrid Fe–3Cr–0·5Mo–xMn–0·24C steel10.1179/174329008X284976 ↗
18. Comparison of mechanical properties of Mn-Cr-Mo steels sintered in different conditions10.4028/www.scientific.net/SSP.197.33 ↗
19. The sintering behaviour of Fe-Mn-C powder system, correlation between thermodynamics and sintering process, manganese distribution and microstructure composition, effect of alloying mode
20. The role of oxygen transfer in sintering of low alloy steel powder compacts: a review of the “internal getter” effect10.1007/s11837-016-1819-z ↗
21. B.S.Lindsley, Chris, Howard Rutz, High performance manganese containing PM steels, in: Proceeedings of International Conference on Powder Metall. Part. Mater., MPIF, Washington, DC, 2008, pp. (7) 17–25.
22. F. Chagnon, C. Coscia, Development and properties of a new malleable iron powder grade, in: Proceedings of International Conference on Powder Metall. Part. Mater., MPIF, Nashville, TN, 2012, pp. (10) 7–20.
23. Federation · 2010
24. Evaluation of PM fracture surfaces using quantitative fractography
25. Draper · 1998
26. Krauss · 2005
27. A review of failure of sintered steels: fractography of static and dynamic crack nucleation, coalescence, growth and propagation10.1080/00325899.2016.1145786 ↗
28. Understanding contribution of microstructure to fracture behaviour of sintered steels10.1179/1743290114Y.0000000119 ↗
29. Navidi · 2011
30. Deformation and fracture in martensitic carbon steels tempered at low temperatures10.1007/s11661-001-0344-y ↗
31. The divorced eutectoid transformation in steel10.1007/s11661-998-0245-4 ↗
32. The tensile properties of pearlite, bainite, and Spheroidite10.1007/s13632-012-0027-7 ↗
33. Hull · 1999
34. The fracture behavior of quenched and tempered manganese steels10.1007/BF02642396 ↗
35. Origin of intergranular fracture in martensitic 8Mn steel at cryogenic temperatures10.1016/j.scriptamat.2013.05.042 ↗