journal article·2018-01

Compression creep of copper under electric current studied by a spark plasma sintering (SPS) apparatus

Barak Ratzker, Maxim Sokol, Sergey Kalabukhov, Nachum Frage

Publisher page

Abstract

Abstract A spark plasma sintering (SPS) apparatus was successfully employed to perform uniaxial compressive creep tests on pure copper under a stress of 30 MPa in the 400–600 °C temperature range. By utilizing two different configurations, the creep experiments were conducted without or with a low-density pulsed direct electric current (~ 6–7 A/mm2) passing through the samples. It was found that under the influence of the applied electric current, the creep rate increased significantly, while the extent of the effect diminished with temperature. The apparent activation energy for creep with applied current decreased from 110 to 66 kJ/mol. This was attributed to the effect of current on the thermally-activated process and dislocations motion. No distinct evidence that the electric current affects the microstructure was observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Electromechanical effects in metals
2. Creep of metals under the influence of electric current
3. Electroplastic deformation of metal
4. A study of the electroplastic effect in metals10.1016/0036-9748(78)90026-1 ↗
5. Additional results on the electroplastic effect in metals10.1016/0036-9748(79)90311-9 ↗
6. Drag of dislocations by an electron wind in metals
7. Action of current pulses on zinc single crystals during creep10.1002/pssa.2210790228 ↗
8. Influence of current pulse on the mobility and multiplication of dislocations in Zn
9. Electroplasticity- the effect of electricity on the mechanical properties of metals10.1007/BF03221075 ↗
10. Salandro · 2015
11. Recent advances and challenges in electroplastic manufacturing processing of metal10.1557/JMR.2010.0170 ↗
12. Braunovic · 2007
13. Anisotropy of the effect of electronic and α-irradiation on the process of deformation of zinc single crystals in the brittle state
14. Influence of pulsed current peak on the creep rate of zinc crystals
15. The “electroplastic effect”
16. The nature of the electroplastic effect in metals
17. On the mechanisms for the electroplastic effect in metals10.1016/0001-6160(86)90001-5 ↗
18. The effect of electric current pulses on the dislocation mobility in zinc single crystals10.1002/pssa.2211210210 ↗
19. W.D. Cao, H. Conrad, Effect of stacking fault energy and temperature on the electroplastic effect in FCC metals, in: Proceedings of Micromechanics of Advanced Materials—A Symposium in Honor of Professor James C.M. Li’s 70th birthday, Minerals, Metals & Materials Society, Warrendale, PA, 1995, pp. 225–236.
20. Kinetic mechanism of the electroplastic effect in metals10.3103/S1062873808090037 ↗
21. The action of a directed flow of electrons on dislocations
22. Dislocation dragging by electrons in metals10.1070/PU1974v016n06ABEH004096 ↗
23. Direct observation of electrotransport of dislocations in a metal
24. Electroplasticity in metals and ceramics10.1016/S0921-5093(00)00786-3 ↗
25. Thermally activated plastic flow of metals and ceramics with an electric field or current10.1016/S0921-5093(01)01122-4 ↗
26. Electroplastic effect in copper subjected to low density electric current10.1016/0036-9748(81)90284-2 ↗
27. The effects of electric currents and fields on deformation in metals, ceramics, and ionic materials: an interpretive survey10.1081/AMP-200028070 ↗
28. The electroplastic effect in V3Si10.1016/0036-9748(80)90202-1 ↗
29. Effect of electric current on the creep deformation of lead10.1016/j.msea.2010.12.047 ↗
30. Effect of DC current on tensile creep of pure tin10.1016/j.msea.2013.10.070 ↗
31. Creep of polycrystalline magnesium aluminate soinel studied by an SPS apparatus10.3390/ma9060493 ↗
32. Using a spark plasma sintering apparatus as a tool in a compressive creep study of fine-grained alumina10.1016/j.ceramint.2017.04.106 ↗
33. Fundamental investigations on the spark plasma sintering/synthesis process II. Modeling of current and temperature distributions10.1016/j.msea.2004.11.019 ↗
34. Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering10.1016/j.actamat.2017.11.010 ↗
35. ASTM E-209-00. Compression tests of metallic materials at elevated temperatures with conventional or rapid heating rates and strain rates, West Conshohocken (PA): ASTM International; 2010, 2010.
36. Creep behavior of copper at intermediate Temperatures-III. A comparison with theory10.1016/0956-7151(91)90151-P ↗
37. High temperature creep in copper10.1080/14786437108216401 ↗
38. Creep in face-centered cubic metals with special reference to copper10.1016/0001-6160(59)90131-2 ↗
39. Steady-state creep characteristics of polycrystalline copper in the temperature range of 400 to 950°C
40. Creep behavior of copper at intermediate Temperatures-I. Mechanical characteristics10.1016/0001-6160(89)90011-4 ↗
41. Texture and grain boundary character distribution in a thermomechanically processed OFHC copper10.1115/1.4004069 ↗
42. Cell structure in cold worked and creep deformed phosphorus alloyed copper10.1016/j.matchar.2014.01.007 ↗
43. Overview no. 96 evolution of f.c.c. deformation structures in polyslip10.1016/0956-7151(92)90296-Q ↗