journal article·2017-07Open access

Determination of plasticity following deformation and welding of austenitic stainless steel

Murat O. Acar, Michael E. Fitzpatrick

Abstract

Intergranular strain has been associated with high-temperature cracking of welded pipework in 316H austenitic stainless steel material used in nuclear power plant heat exchangers. In this study, neutron diffraction has been used to study the development of intergranular strains in plastically-deformed and welded 316H stainless steel. Measurements have been made of the intergranular strain evolution with increasing plastic strain in base material, and correlated with further measurements made in samples extracted from welded pipes, where the pipes were welded following plastic deformation to different levels of plastic strain. Strong tensile strain evolution was seen on the compliant 200 grain family. The results were correlated with various proxy measures of plastic strain, including hardness and diffraction peak width, and excellent agreement was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. ASME, Boiler and Pressure Vessel Code, Section I: Rules for Construction of Power Boilers. New York, USA, 2010.
2. Stress corrosion cracking of nuclear reactor pressure vessel and piping steels10.1016/0308-0161(88)90046-4 ↗
3. Effects of prior cold work and sensitization heat treatment on chloride stress corrosion cracking in type 304 stainless steels10.1016/S0010-938X(00)00165-7 ↗
4. The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water10.1016/j.corsci.2007.07.012 ↗
5. Effect of surface machining and cold working on the ambient temperature chloride stress corrosion cracking susceptibility of AISI 304L stainless steel10.1016/j.msea.2009.08.039 ↗
6. Influence of localized deformation on A-286 austenitic stainless steel stress corrosion cracking in PWR primary water10.1016/j.jnucmat.2007.01.001 ↗
7. Mechanisms of strain accumulation and damage development during creep of prestrained 316 stainless steels10.1007/s11661-004-0367-2 ↗
8. Prestrain effects on creep ductility of a 316 stainless steel light forging10.1016/S0308-0161(99)00007-1 ↗
9. Advances and Challenges in Structural Integrity10.4028/www.scientific.net/AMM.7-8.13 ↗
10. Marshall · 1984
11. Effect of pre-strain on creep of three AISI 316 austenitic stainless steels in relation to reheat cracking of weld-affected zones10.1016/j.jnucmat.2010.02.021 ↗
12. Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra10.1063/1.365956 ↗
13. Neutron diffraction measurements of residual stress and plastic deformation in an aluminium alloy weld10.1243/03093247V234201 ↗
14. Measurement of plastic strain of polycrystalline material by electron backscatter diffraction10.1016/j.nucengdes.2004.11.006 ↗
15. Internal stresses in deformed crystalline aggregates10.2138/rmg.2006.63.16 ↗
16. Hutchings · 2005
17. Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures10.1007/s11661-006-0129-4 ↗
18. Intergranular strains and plastic deformation of an austenitic stainless steel10.1016/S0921-5093(01)01799-3 ↗
19. Verhoeven · 1975
20. Fitzpatrick · 2003
21. Generation of intergranular strains in 309H stainless steel under uniaxial loading10.1016/S1359-6454(99)00382-1 ↗
22. Measurements and predictions of strain pole figures for uniaxially compressed stainless steel10.1016/j.scriptamat.2004.05.030 ↗
23. Plastic behavior of a nickel-based alloy under monotonic-tension and low-cycle-fatigue loading10.1016/j.ijplas.2007.10.001 ↗
24. Quantification of plastic strain of stainless steel and nickel alloy by electron backscatter diffraction10.1016/j.actamat.2005.08.046 ↗
25. The correlation between plastic strain and anisotropy strain in aluminium alloy polycrystals10.1016/S0921-5093(01)01780-4 ↗
26. Diffraction measurements for evaluating plastic strain in A533B ferritic steel—a feasibility study10.1088/0022-3727/43/26/265501 ↗
27. Inter-and intragranular stresses in cyclically-deformed 316 stainless steel10.1016/j.msea.2005.02.030 ↗
28. ENGIN-X: a third-generation neutron strain scanner10.1107/S0021889806042245 ↗
29. S.I. Campbell, F.A. Akeroyd, C.M. Moreton-Smith, Open GENIE – Analysis and Control. https://arxiv.org/pdf/cond-mat/0210442v2.pdf, Accessed June 2017.
30. Acar · 2012
31. Inertia welding nickel-based superalloy: part I. Metallurgical characterization10.1007/s11661-002-0307-y ↗
32. Progressive steps in the development of electron backscatter diffraction and orientation imaging microscopy10.1111/j.0022-2720.2004.01321.x ↗
33. Dieter · 1988
34. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
35. Evolution of intergranular stresses during in situ straining of IF steel with different grain sizes10.1016/j.msea.2006.04.057 ↗
36. The characterization of low-angle boundaries by EBSD10.1111/j.1365-2818.2005.01513.x ↗
37. An experimental study of the polycrystalline plasticity of austenitic stainless steel10.1016/j.ijplas.2015.05.012 ↗
38. In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel10.1016/j.matdes.2016.09.057 ↗