The introduction of highly dense shear bands and their effect on plastic deformation in Zr and Cu-based bulk metallic glasses
Source abstract
Abstract
Abstract The plastic deformation of the Zr 64.13 Cu 15.75 Ni 10.12 Al 10 and Cu 60 Zr 30 Ti 10 bulk metallic glasses (BMGs) with arc-shaped edges were performed by compression. Highly dense shear bands with an average spacing of 520 nm are uniformly distributed in a large area in Zr 64.13 Cu 15.75 Ni 10.12 Al 10 BMG, and the shear band spacing can be reduced to a minimum value of about 110 nm. In the region adjacent to the dense shear band zone in Zr 64.13 Cu 15.75 Ni 10.12 Al 10 BMG, the shear band spacing increases linearly. Similarly, highly dense shear bands were also introduced into Cu 60 Zr 30 Ti 10 BMG. When the width of stress concentration zone is of the order of plastic zone size ahead of crack tip, the internal and external stress limitations can lead to the formation of a large number of uniformly-distributed shear bands. In addition, the pre-existing dense shear bands can lead to a non-localized plastic deformation manner for deformed Zr 64.13 Cu 15.75 Ni 10.12 Al 10 BMG.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
2. Strain localization in amorphous metals10.1016/0001-6160(82)90225-5 ↗
3. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
4. Softening and dilatation in a single shear band10.1016/j.actamat.2011.04.047 ↗
5. Softening caused by profuse shear banding in a bulk metallic glass10.1103/PhysRevLett.96.105503 ↗
6. Plastic flow and fracture of metallic glass10.1007/BF02642754 ↗
7. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
8. Tuning the mechanical performance of a Ti-based bulk metallic glass by pre-deformation10.1016/j.intermet.2010.06.006 ↗
9. “Work-hardenable” ductile bulk metallic glass10.1103/PhysRevLett.94.205501 ↗
10. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions10.1103/PhysRevLett.84.2901 ↗
11. Intrinsic plasticity or brittleness of metallic glasses10.1080/09500830500080474 ↗
12. Enhancement of plasticity and toughness in monolithic Zr-based bulk metallic glass by heterogeneous microstructure10.1016/j.scriptamat.2010.11.047 ↗
13. Achieving large macroscopic compressive plastic deformation and work-hardening-like behavior in a monolithic bulk metallic glass by tailoring stress distribution10.1063/1.2937141 ↗
14. Stress gradient enhanced plasticity in a monolithic bulk metallic glass10.1016/j.intermet.2008.07.004 ↗
15. Effect of sample size on ductility of metallic glass10.1080/09500830902720917 ↗
16. On the stress-state dependent plasticity of brittle metallic glasses: experiment, theory and simulation10.1016/j.msea.2013.08.009 ↗
17. Enhancing plasticity of Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass by precompression10.1063/1.3211112 ↗
18. Our thoughts are ours, their ends none of our own: are there ways to synthesize materials beyond the limitations of today?10.1016/j.actamat.2008.08.028 ↗
19. Hardness and shear band evolution in bulk metallic glasses after plastic deformation and annealing10.1016/j.actamat.2008.07.009 ↗
20. Hardness and plastic deformation in a bulk metallic glass10.1016/j.actamat.2004.10.023 ↗
21. On the hardness of shear bands in amorphous alloys10.1016/j.scriptamat.2009.07.037 ↗
22. Effect of temperature on the plastic zone size and the shear band density in a bulk metallic glass10.1016/j.msea.2011.12.040 ↗
23. Multiplication of shear bands and ductility of metallic glass10.1063/1.2738366 ↗
24. Shear band formation and ductility in bulk metallic glass10.1080/14786430500154059 ↗
25. Non-localized deformation in metallic alloys with amorphous structure10.1016/j.actamat.2014.01.003 ↗
26. Initiation of shear bands near a stress concentration in metallic glass10.1016/j.actamat.2007.05.054 ↗
27. Analysis of shear banding in metallic glasses under bending10.1016/j.actamat.2005.05.011 ↗
28. Shear band spacing under bending of Zr-based metallic glass plates10.1016/j.actamat.2004.01.034 ↗
29. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
30. Fracture toughness determination for a beryllium-bearing bulk metallic glass10.1016/S1359-6462(97)00250-9 ↗
31. Fracture toughness, fracture morphology, and crack-tip plastic zone of a Zr-based bulk amorphous alloy10.1007/s11661-001-1032-7 ↗
32. Long range stress fields and cavitation along a shear band in a metallic glass: the local origin of fracture10.1016/j.actamat.2015.06.062 ↗
33. A single shear band in a metallic glass: local core and wide soft zone10.1063/1.4900791 ↗
34. High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternary systems10.1016/S1359-6454(01)00181-1 ↗
35. Preliminary assessment of flow, notch toughness, and high temperature behavior of Cu60Zr20Hf10Ti10 bulk metallic glass10.1016/j.scriptamat.2004.03.034 ↗