Micromechanics-based damage model for failure prediction in cold forming
Source abstract
Abstract
Abstract The purpose of this study was to develop a micromechanics-based damage (micro-damage) model that was concerned with the evolution of micro-voids for failure prediction in cold forming. Typical stainless steel SS316L was selected as the specimen material, and the nonlinear isotropic hardening rule was extended to describe the large deformation of the specimen undergoing cold forming. A micro-focus high-resolution X-ray computed tomography (CT) system was employed to trace and measure the micro-voids inside the specimen directly. Three-dimensional (3D) representative volume element (RVE) models with different sizes and spatial locations were reconstructed from the processed CT images of the specimen, and the average size and volume fraction of micro-voids (VFMV) for the specimen were determined via statistical analysis. Subsequently, the micro-damage model was compiled as a user-defined material subroutine into the finite element (FE) package ABAQUS. The stress-strain responses and damage evolutions of SS316L specimens under tensile and compressive deformations at different strain rates were predicted and further verified experimentally. It was concluded that the proposed micro-damage model is convincing for failure prediction in cold forming of the SS316L material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. W. Brocks, A. Cornec, I. Scheider, Computational aspects of nonlinear fracture mechanics, Gkss Forschungszentrum Geesthacht Gmbh-Publications-Gkss, 30, 2003 〈http://doi.org/10.1016/B0-08-043749-4/03102-5〉.10.1016/B0-08-043749-4/03102-5 ↗
2. A continuous damage mechanics model for ductile fracture10.1115/1.3225775 ↗
3. Kachanov · 1986
4. Lemaitre · 2012
5. Lemaitre · 1990
6. Unified CDM model and local criterion for ductile fracture—I. Unified CDM model for ductile fracture10.1016/0013-7944(92)90289-Q ↗
7. A CDM approach of ductile damage with plastic compressibility10.1007/s10704-005-3061-5 ↗
8. On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials10.1016/j.cma.2004.01.038 ↗
9. Prevention of internal cracks in forward extrusion by means of counter pressure: a numerical treatise
10. Numerical prediction of slant fracture with continuum damage mechanics10.1016/j.engfracmech.2007.11.001 ↗
11. Failure analysis based on microvoids damage model for DP600 steel on in-situ tensile tests10.1016/j.engfracmech.2015.11.017 ↗
12. Homogenization principles and their application to continuum damage mechanics10.1016/S0266-3538(01)00116-6 ↗
13. Continuum theory of ductile rupture by void nucleation and growth: Part I – yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
14. An analysis of ductile rupture in notched bars10.1016/0022-5096(84)90031-0 ↗
15. A continuum model for void nucleation by inclusion debonding10.1115/1.3173064 ↗
16. Approximate models for ductile metals containing non-spherical voids—case of axisymmetric prolate ellipsoidal cavities10.1016/0022-5096(93)90029-F ↗
17. An extended model for void growth and coalescence10.1016/S0022-5096(00)00019-3 ↗
18. Prediction of ductile fracture initiation using micromechanical analysis10.1016/S0013-7944(03)00013-4 ↗
19. Dissipation in porous metal plasticity and ductile fracture10.1016/S0022-5096(01)00013-8 ↗
20. The Rousselier model for porous metal plasticity and ductile fracture10.1016/B978-012443341-0/50049-1 ↗
21. Damage parameter identification by a periodic homogenization approach10.1016/S0927-0256(02)00260-4 ↗
22. R. Bossi, F.A. Iddings, G.C. Wheeler, P. Moore, Nondestructive testing handbook, Radiographic Testing, The American Society for Nondestructive Testing, USA, 2002.
23. Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: effect of microstructure evolution, particle size effects and interfacial failure10.1016/j.msea.2016.03.011 ↗
24. Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti-6Al-4V10.1016/j.ijfatigue.2016.06.001 ↗
25. Hsieh · 2009
26. An experimental investigation into the micro-mechanics of spall initiation and propagation in Ti–6Al–4V during shock loading10.1016/j.msea.2013.04.055 ↗
27. A nonlinear CDM model for ductile failure analysis of steel bridge columns under cyclic loading
28. The use of stainless steel in structures10.1002/pse.190 ↗
29. Logarithmic strain, logarithmic spin and logarithmic rate10.1007/BF01213020 ↗
30. Self-consistent Eulerian rate type elasto-plasticity models based upon the logarithmic stress rate10.1016/S0749-6419(99)00003-0 ↗
31. Logarithmic stress rate based constitutive model for cyclic loading in finite plasticity10.1016/j.ijplas.2013.08.004 ↗
32. A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation10.1016/S0167-6636(03)00024-3 ↗
33. Thermo-mechanically coupled cyclic elasto-viscoplastic constitutive model of metals: theory and application10.1016/j.ijplas.2015.12.005 ↗
34. Accuracies of numerical solution methods for the elastic-perfectly plastic model10.1115/1.3454568 ↗
35. Dynamic mechanical response of biomedical 316L stainless steel as function of strain rate and temperature10.1155/2011/173782 ↗
36. Relationship of grain size and deformation mechanism to the fracture behavior in high strength–high ductility nanostructured austenitic stainless steel10.1016/j.msea.2014.12.052 ↗
37. Multiscale approach with RSM for stress–strain behaviour prediction of micro-void-considered metal alloy10.1016/j.matdes.2015.05.064 ↗
38. Volume Graphics GmbH, VGStudio Max 2.2 Reference Manual, Heidelberg, 2013.