journal article·2017-03

Constitutive modeling of elastoplasticity in spark-plasma sintered metal-matrix nanocomposites

M.U. Siddiqui, A.F.M. Arif, Saheb Nouari, M. Shahzeb Khan

Publisher page

Abstract

Abstract A methodology to model the elastoplastic constitutive response of spark plasma sintered metal matrix particulate nanocomposites is presented. The formulated methodology incorporates the effect of Hall-Petch strengthening, Orowan strengthening, dislocation density strengthening, load transfer strengthening and porosity on the elastoplastic response of metal matrix nanocomposite using a mean-field homogenization approach used in conjunction with a plasticity hardening function for metal matrix that is dependent on the metal matrix crystallite size, inclusion particle size and inclusion volume fraction. The effect of sintering process parameters is incorporated into the model using a grain growth model that can estimate the average matrix crystallite size as a function of sintering time, sintering temperature, inclusion size and inclusion volume fraction. The formulated methodology has been validated against experimentally measured crystallite sizes and stress-strain responses of ball-milled and spark plasma sintered Al-Al 2 O 3 nanocomposite samples synthesized during the current work. Additional validation of the methodology against the experimental stress-strain response of nanostructured aluminum reported in the literature has also been carried out.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Casati · 2016
2. Microstructure and properties of spark plasma sintered aluminum containing 1 wt.% SiC nanoparticles10.3390/met5010070 ↗
3. Recrystallization and grain growth phenomena in a particle-reinforced aluminum composite10.1007/BF02647590 ↗
4. Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites10.1016/j.matchemphys.2004.02.002 ↗
5. Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites10.1177/0021998311401111 ↗
6. Development of high-performance A356/nano-Al2O3 composites10.1016/j.msea.2009.04.014 ↗
7. A unified model for the prediction of yield strength in particulate-reinforced metal matrix nanocomposites10.3390/ma8085138 ↗
8. Ductility improvement and fatigue studies in Mg-CNT nanocomposites10.1016/j.compscitech.2007.10.057 ↗
9. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
10. Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing10.1016/j.matdes.2008.10.005 ↗
11. Matrix structure evolution and nanoreinforcement distribution in mechanically milled and spark plasma sintered Al-SiC nanocomposites10.3390/ma7096748 ↗
12. Effect of reinforcement volume fraction on the mechanical properties of Al--SiC nanocomposites produced by mechanical alloying and consolidation10.1177/0021998309347570 ↗
13. The effect of particle size, sintering temperature and sintering time on the properties of Al-Al2O3 composites, made by powder metallurgy10.1016/j.jmatprotec.2009.04.007 ↗
14. Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing10.1016/j.jmatprotec.2011.03.007 ↗
15. Spark plasma extrusion (SPE) of ball-milled aluminum and carbon nanotube reinforced aluminum composite powders10.1016/j.compositesa.2009.09.028 ↗
16. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites10.1557/jmr.2009.0318 ↗
17. Metal matrix composites reinforced by nano-particles—a review10.3390/met4010065 ↗
18. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
19. The cleavage strength of polycrystals
20. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect10.1016/j.msea.2011.10.043 ↗
21. Grain size dependence of the strength of metals: the Hall-Petch effect does not scale as the inverse square root of grain size10.1016/j.ijplas.2013.07.004 ↗
22. Nanocrystalline aluminum and iron: mechanical behavior at quasi-static and high strain rates, and constitutive modeling10.1016/j.ijplas.2004.07.008 ↗
23. Effect of grain refinement on mechanical properties of ball-milled bulk aluminum10.1016/j.msea.2008.01.045 ↗
24. Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling10.1016/j.ijplas.2008.08.001 ↗
25. Effect of processing on mechanically alloyed and spark plasma sintered Al-Al 2 O 3 nanocomposites10.1155/2015/609824 ↗
26. Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers10.1016/j.ijplas.2004.09.003 ↗
27. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
28. Y. Li, A.J. Bushby, D.J. Dunstan, The Hall-Petch effect as a manifestation of the general size effect, arXiv:1507.01223 [Cond-Mat.mtrl-Sci] 1–33, 2015.
29. Tensile behavior of bulk nanocrystalline aluminum synthesized by hot extrusion of ball-milled powders10.1016/j.scriptamat.2008.07.030 ↗
30. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
31. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
32. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
33. An introduction to composite materials
34. On the Zener limit of grain growth through 2D Monte Carlo simulation10.1016/j.commatsci.2012.02.013 ↗
35. Effects of particle size on inhibited grain growth10.1016/0956-716X(90)90574-Z ↗
36. Suk-Joong · Sintering Densification,Grain Growth, and Microstructure · 2005
37. High grain size stability of nanocrystalline Al prepared by mechanical attrition10.1557/JMR.2001.0474 ↗
38. Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: cryomilling and spark plasma sintering10.1007/BF02586229 ↗
39. Mechanical Behavior of Particle Reinforced Metal Matrix Composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
40. An analysis of strengthening mechanisms in a mechanically alloyed, oxide dispersion strengthened iron aluminide intermetallic10.1016/S1359-6454(02)00101-5 ↗
41. Forsythe · 1977
42. Convergence properties of the Nelder--Mead simplex method in low dimensions10.1137/S1052623496303470 ↗