Mechanical properties of 75% Ar /25% CO2 flux-cored arc welded E309L austenitic stainless steel
Source abstract
Abstract
Abstract The austenitic stainless steel E309L filler is a commonly used material for in-situ crack repairs of hydro-turbines due to its high weldability, mechanical and chemical compatibility with the turbine's base material. However, experimental data for the as-welded E309L filler is scarce. In this paper, the mechanical properties of as-deposited 75% Ar/25% CO 2 flux-cored arc welding E309L austenitic stainless steel are investigated. The material is shown to be rate- and temperature-sensitive. Furthermore, although the directional nature of the welding/repair process might suggests otherwise, the response is found to be isotropic. Finally, a classic three-dimension Johnson-Cook plasticity theory is implemented and reproduces the experimental results with good accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Flow stress of metals and its application in metal forming analyses
2. ASTM-E8, Tension testing of metallic materials. ASTM Standards. Designation: E8/E8M-11, 2011.
3. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels10.1016/j.actamat.2004.05.003 ↗
4. J. Curtat, Étude de l′effet du martelage sur la vie en fatigue de l′acier E309L utilisé pour une réparation de turbine 13%Cr-4%Ni. Master’s thesis. École de technologie supérieure, Montréal, Canada, 2016.
5. Davis · 2004
6. Hot corrosion studies on bimetallic combinations of Monel 400 and AISI 304 subjected to molten salt environment10.4028/www.scientific.net/AMR.383-390.3217 ↗
7. Determination of the Johnson-Cook material parameters using the SCS specimen10.1007/s11340-008-9201-x ↗
8. An experimental comparison of weld-induced residual stresses using different stainless steel filler metals commonly used for hydraulic turbines manufacturing and repair10.4028/www.scientific.net/MSF.768-769.628 ↗
9. Effect of impact energy on residual stresses induced by hammer peening of 304L plates10.1016/j.jmatprotec.2008.01.025 ↗
10. Evaluation of residual stresses induced by robotized hammer peening by the contour method10.1007/s11340-008-9205-6 ↗
11. R. Hill, A theory of the yielding and plastic flow of anisotropic metals, in: Proceedings of the Royal Society of London 193, 1948, pp. 281–297.10.1098/rspa.1948.0045 ↗
12. G. Johnson, W. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, in: Proceedings of the 7th International Symposium on Ballistics, 1983, pp. 541–547.
13. Deformation and failure response of 304L stainless steel SMAW joint under dynamic shear loading10.1016/j.msea.2004.04.034 ↗
14. Mechanical properties of CO2/MIG welded structural rolled steel and stainless steel10.1007/s12206-014-1216-x ↗
15. 3D FEM simulations of shoulder milling operations on a 304L stainless steel10.1016/j.simpat.2011.10.009 ↗
16. The influence of interstitial diffusion across the fusion line on the HAZ microstructure and properties in 12% chromium type 1.4003 steels10.1007/BF03266681 ↗
17. A comparison of residual stress in hammer-peened, multi-pass steel welds - A514(S690Q) and S4150010.1007/BF03266717 ↗
18. Deformation and fracture behavior of the P91 martensitic steel at high temperatures10.1016/j.msea.2016.06.065 ↗
19. Z.L. Wang, X.D., Mechanical Property and Corrosion Resistance of the E309L Buffer Layer in Weld Overlay. Applied Mechanics and Materials, 668–669, 2014, pp. 39–42.10.4028/www.scientific.net/AMM.668-669.39 ↗