Influence of ferrite matrix and precipitation status on the mechanical properties of low carbon low alloy steel during high temperature tension
Source abstract
Abstract
Abstract Utilizing the inhomogeneity of temperature and stress status during heavy plate rolling, with controlled cooling, polygonal ferrite and quasi-polygonal ferrite with two grain sizes for each were obtained, and their precipitation status varied with different microstructures. GLEEBLE 3500 was used to investigate the influence of microstructure and precipitation status during high temperature tensile deformation. The results revealed that ferrite matrix microstructure and nucleation of precipitates were determined by the overall cooling process, while the final precipitation status was mainly determined by the cooling rate within the temperature range of (Ti,Mo)C precipitation during the subsequent isothermal process. Also, dislocations and subboundaries acting as containers facilitated the growth of precipitates along some particular directions. Pre-existing substructures, such as low-angle boundaries and statistically-stored dislocations, along with small precipitates, influenced the formation of subgrains and dislocation cells during high temperature deformation. These newly-generated substructures involved rotation or rearrangement of dislocations, and finally translated into recrystallized grains. Additionally, the grain size was closely related to the probability of interactional of subboundaries. Although the polygonal ferrite matrix showed more stable stress status, the quasi-polygonal ferrite matrix with fine precipitates and small grains exhibited better mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Phaniraj · Mater. Sci. Eng. A · 2015 · 633 · 110.1016/j.msea.2015.02.067 ↗
2. Kim · Mater. Sci. Eng. A · 2013 · 565 · 43010.1016/j.msea.2012.12.055 ↗
3. Funakawa · ISIJ Int. · 2004 · 44 · 194510.2355/isijinternational.44.1945 ↗
4. Zhang · Acta Metall. Sin. (Engl. Lett.) · 2015 · 28 · 64110.1007/s40195-015-0243-7 ↗
5. Kim · Mater. Sci. Eng. A · 2014 · 605 · 24410.1016/j.msea.2014.03.054 ↗
6. Yen · Acta Mater. · 2011 · 59 · 626410.1016/j.actamat.2011.06.037 ↗
7. Okamoto · Acta Mater. · 2010 · 58 · 479110.1016/j.actamat.2010.05.016 ↗
8. Cheng · Mater. Sci. Eng. A · 2016 · 651 · 18510.1016/j.msea.2015.10.055 ↗
9. Yen · Scr. Mater. · 2009 · 61 · 61610.1016/j.scriptamat.2009.05.036 ↗
10. Krauss · ISIJ Int. · 1995 · 35 · 93710.2355/isijinternational.35.937 ↗
11. Yong · 2006
12. Park · Mater. Sci. Eng. A · 2015 · 624 · 20310.1016/j.msea.2014.11.070 ↗
13. Hurley · Mater. Sci. Eng. A · 2001 · 302 · 20610.1016/S0921-5093(00)01823-2 ↗
14. Sakai · Prog. Mater. Sci. · 2014 · 60 · 13010.1016/j.pmatsci.2013.09.002 ↗
15. Eghbali · Mater. Sci. Eng. A · 2010 · 527 · 340710.1016/j.msea.2010.01.075 ↗
16. Hockauf · Acta Mater. · 2014 · 80 · 25010.1016/j.actamat.2014.07.061 ↗
17. Le · Acta Mater · 2013 · 61 · 707210.1016/j.actamat.2013.07.046 ↗
18. Sakai · Metall. Mater. Trans. A · 2008 · 39A · 220610.1007/s11661-008-9556-8 ↗
19. Courtney · 2000
20. Sakai · Mater. Sci. Eng. A · 1997 · A234–236 · 85710.1016/S0921-5093(97)00398-5 ↗
21. Chen · Acta Mater. · 2014 · 64 · 7810.1016/j.actamat.2013.11.025 ↗
22. Kamikawa · ISIJ Int. · 2014 · 54 · 21210.2355/isijinternational.54.212 ↗
23. Pan · 1998
24. Ashby · Philos. Mag. · 1970 · 21 · 33910.1080/14786437008238426 ↗