Failure during hot working of spray-formed Rene’ 88
Source abstract
Abstract
Abstract Isothermal, hot compression tests were conducted on spray-formed Rene’ 88 to establish the effects of strain, strain rate, and temperature on the closure of porosity and the initiation of ductile fracture during hot working. In the as-sprayed condition, porosity was evenly distributed throughout the material in both the transverse and longitudinal directions. Hot compression tests were conducted at temperatures between 760 and 1090 °C at strain rates of 0.01, 0.1, and 1.0 s −1 to axial height strains of 0.4, 0.7, or 1.1. The deformation gave rise to near full-density (0.06% porosity) at the center and to porous regions (∼0.5% porosity) ∼1–2 mm from the barreled free surface on the equatorial plane. From these observations and parallel finite-element-method (FEM) simulations, it was concluded that pore closure was enhanced by a state of triaxial compressive stress. Observations of pore coalescence and fracture via splat boundary separation at the free surface were also interpreted via FEM simulations. The simulation results for the near-surface region revealed that a maximum-tensile-work, rather than a tensile-stress, criterion controlled the process of splat-boundary separation, pore linkage, and final ductile fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · High-Velocity Impact and Material Behavior · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Leatham · Int. J. Power Metall. · 1993 · 29 · 321
2. Bricknell · Metall. Trans. A · 1986 · 17 · 58310.1007/BF02643977 ↗
3. Benz · Powder Metall. · 1994 · 37 · 21310.1179/pom.1994.37.3.213 ↗
4. Benz · 1996 · 723
5. Lippard · 1998 · 151
6. Chang · 1988 · 486
7. Fiedler · J. Met. · 1987 · 39 · 28
8. Prichard · 1992 · 205
9. W.T. Carter, M.G. Benz, F.G. Muller, R.M. Forbes Jones, A.G. Leatham, in: J. Porter, M. Philllips (Eds.), International Conference on Powder Metallurgy and Particulate Materials, New Jersey, 1995, p. 21.
10. Grant · Prog. Mater. Sci. · 1995 · 39 · 49710.1016/0079-6425(95)00004-6 ↗
11. Wlodek · 1996 · 129
12. Krueger · 1996 · 277
13. Forbes Jones · J. Met. · 1999 · 51 · 27
14. Wlodek · 1996 · 129
15. DEFORM™ Users Manual, version 3.1, Scientific Forming Technologies Corporation, Columbus, OH, 1993.
16. 1998
17. Touloukian · 1967
18. Shima · Int. J. Mech. Sci. · 1976 · 18 · 28510.1016/0020-7403(76)90030-8 ↗
19. Cockcroft · J. Inst. Met. · 1968 · 96 · 33
20. Wang · J. Mat. Process. Technol. · 1996 · 60 · 9510.1016/0924-0136(96)02313-8 ↗
21. Dieter · 1986
22. Kuhn · Metall. Trans. · 1971 · 2 · 319710.1007/BF02814972 ↗
23. Semiatin · Metall. Mater. Trans. A · 1999 · 30 · 141110.1007/s11661-999-0289-0 ↗
24. Seetharaman · 1991 · 895
25. Semiatin · 1997 · 28