journal article·2005-04

Corrosion behavior of uniaxially cold-pressed Fe2Mo intermetallic in 0.5M H2SO4

R. Morales, A. Albiter, M. Salazar, F.J. Tavera, R. Escudero, J.G. Gonzalez-Rodriguez

Materials Science and Engineering: A· Volume 397· Issue 1-2
Publisher page

Abstract

Abstract The effect of sintering pressure and temperature on the corrosion resistance of uniaxially cold-pressed Fe 2 Mo intermetallic alloy in 0.5M H 2 SO 4 has been evaluated using electrochemical techniques at room temperature. The intermetallic Fe 2 Mo powder was sintered at 750 °C at 607, 884 and 1223 MPa and at 900 °C at 480, 540, 822, 873 and 1040 MPa to produce different porosities. Electrochemical techniques included potentiodynamic polarization curves, electrochemical noise in current, evolution of the free corrosion potential ( E corr ) with time and linear polarization resistance to know the change of the corrosion rate with time. Results showed that all the alloys showed a passive region of several hundreds of millivolts wide, and that, regardless the compacting pressure or temperature, practically neither the E corr nor the anodic current density values were affected by these variables, which rapidly reached a steady-state value. At 750 °C, the corrosion rate increased as the sintering pressure decreased, probably due to the retention of electrolyte inside the porous. At T = 900 °C, this was not so evident, but it followed a similar tendency. Thus, the electrochemical noise reading showed that precisely at the lowest compacting pressure for 750 °C, where is expected the highest porosity density, the corrosion type is a localized one, probably pitting, whereas in all the other compacting conditions, where a lower porosity density is expected, the corrosion type is uniform generalized one.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Coscia · Mater. Perform. · 2003 · 27 · 52
2. Robin · Corros. Eng. Sci. Tech. · 2003 · 38 · 20510.1179/147842203770226942 ↗
3. Morales · Metall. Mater. Trans. B · 2003 · 34B · 66110.1007/s11663-003-0037-6 ↗
4. Morales · J. Mater. Res · 2002 · 17 · 195410.1557/JMR.2002.0289 ↗
5. Stearn · J. Electrochem. Soc. · 1958 · 105 · 63810.1149/1.2428683 ↗
6. Itagaki · Corros. Sci. · 1997 · 40 · 125510.1016/S0010-938X(97)00121-2 ↗
7. Hdlaky · Corros. Sci. · 1981 · 21 · 31710.1016/0010-938X(81)90006-8 ↗
8. Hdlaky · Corros. Sci. · 1982 · 22 · 23110.1016/0010-938X(82)90107-X ↗
9. Gabrielli · Electrochim. Acta · 1986 · 31 · 102510.1016/0013-4686(86)80018-4 ↗
10. Mansfield · J. Electrochem. Soc. · 1993 · 140 · 220510.1149/1.2220796 ↗
11. Hashimito · Corros. Sci. · 1979 · 19 · 85710.1016/S0010-938X(79)80109-2 ↗
12. Stout · Corrosion · 1979 · 35 · 16510.5006/0010-9312-35.4.141 ↗
13. Thierry · Corros. Sci. · 1991 · 32 · 27310.1016/0010-938X(91)90073-X ↗
14. Ambrose · 1983 · vol. 123
15. Hazza · Desalination · 1997 · 95 · 19910.1016/0011-9164(94)00014-X ↗
16. Hara · J. Electrochem. Soc. · 1979 · 126 · 132810.1149/1.2129271 ↗
17. Pourbaix · 1973
18. Clayton · Corros. Sci. · 1989 · 29 · 88110.1016/0010-938X(89)90059-0 ↗
19. McDonald · J. Electrochem. Soc. · 1992 · 139 · 343410.1149/1.2069096 ↗