journal article·2009-09

Amplitude dependent damping in electrodeposited nano-crystalline nickel after various heat treatments

A. Flejszar, A. Mielczarek, G. Vidrich, W. Riehemann

Publisher page

Abstract

Abstract Coercivity, hardness and amplitude dependence of damping of electrochemically deposited nickel layers were measured directly after electrochemical deposition and subsequently after isochronal heat treatments at various annealing temperatures. All as-electrodeposited nickel samples have ultrafine grains with mean grain sizes in the order of 300 nm. The co-deposition of nanoscaled ceramic SiO 2 -particles led to a reduction of the grain size to 60 nm. The amplitude dependence of damping with and without saturating DC magnetic field, coercivity and microhardness was measured at room temperature after electrodeposition and after successive step by step isochronal heat treatments for increasing annealing temperatures. The heat treatments with increasing temperature led to progressive grain growth in the originally ultra fined grain material. By measuring the amplitude dependence of damping with and without magnetic field magneto-elastic and dislocation damping could be separated. It is shown that the increase in the grain size leads to smaller coercivity and therefore to higher damping, as expected. The amplitude dependent magneto-elastically caused damping was determined as the difference between the damping measurements without and with magnetic field for the same specimen. For annealing temperatures higher than 200 °C an inverse proportionality between the slope of logarithmic decrement versus strain amplitude and the square of coercivity was observed like expected from theory.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Ferkel · Mater. Sci. Eng. A · 1997 · 234 · 47410.1016/S0921-5093(97)00266-9 ↗
2. Schaefer · Nanostruct. Mater. · 1992 · 1 · 52310.1016/0965-9773(92)90085-C ↗
3. Eckert · J. Mater. Res. · 1992 · 7 · 175110.1557/JMR.1992.1751 ↗
4. Valiev · Scripta Mater. · 1996 · 34 · 144310.1016/1359-6462(95)00676-1 ↗
5. Gleiter · Nanostruct. Mater. · 1992 · 1 · 110.1016/0965-9773(92)90045-Y ↗
6. Birringer · 1988 · 339
7. Siegel · Ann. Rev. Mater. Sci. · 1991 · 21 · 55910.1146/annurev.ms.21.080191.003015 ↗
8. Siegel · Nanostruct. Mater. · 1993 · 3 · 110.1016/0965-9773(93)90058-J ↗
9. Schaefer · 1993 · 81
10. Siegel · J. Phys. Chem. Solids · 1994 · 55 · 109710.1016/0022-3697(94)90127-9 ↗
11. Morokhov · 1977
12. Morokhov · 1984
13. Petrov · 1982
14. Petrov · 1986
15. Larikov · Metallofizika · 1992 · 14 · 3
16. Larikov · Metallofiz. Noveishie Tekhnol · 1995 · 17 · 3
17. Andrievskii · Usp. Khim · 1994 · 63 · 43110.1070/RC1994v063n05ABEH000094 ↗
18. Kisker · J. Appl. Phys. · 1996 · 79 · 514310.1063/1.361535 ↗
19. Cihlarova · 2007
20. Göken · Technisches Messen · 2001 · 12 · 53510.1524/teme.2001.68.12.535 ↗
21. Creep in electrodeposited submicrocrystalline nickel and its particle–reinforced nanocomposite10.1016/j.msea.2005.12.107 ↗
22. G. Vidrich, H. Ferkel, V. Sklenicka, K. Kucharova, M. Svoboda, in: P. Sandera (Ed.), Nano’05, Proc. Nano’05, Brno, Czech Republik, 2005, pp. 310–313.
23. Granato · J. Appl. Phys. · 1956 · 27 · 58310.1063/1.1722436 ↗
24. G. Vidrich, O. Moll, A. Belousov, H. Ferkel, in: S.M. Mukhopadhyay, N.B. Dahotre, S. Seal, A. Agarwal (Eds.), Surface and Interfaces in Nanostructured Materials II, Proceedings of TMS 2006, San Antonio, USA, 2006, pp. 41–46.
25. Riehemann · 1994
26. Förster · Naturwissenschaften · 1937 · 25 · 43610.1007/BF01492216 ↗