Dynamic notch fracture toughness assessment of functionally austenitic–martensitic graded steels
Source abstract
Abstract
Functionally graded steels are a group of functionally graded materials provide an arena so that the maximum possible benefits can be derived from composites including martensite and bainite brittle phases. These phases are created with gradual variation in strength within interface of plane carbon steel and austenitic stainless steel during the fabrication process. In the present research, a functionally austenitic–martensitic graded steel, consists of austenitic and martensitic phases was produced by means of electro slag remelting process and its mechanical behavior under impact loading conditions in the form of crack divider configuration was investigated. Empirical values of the notch fracture toughness J were carried out utilizing load–displacement curve which was recorded in Charpy impact test instrumented by Hopkinson pressure bar (HPB). J-integral is one of the fracture parameters in elastic–plastic fracture mechanics, which can be used to predict the fracture resistance in cracked and notched components. By correlating mean strain energy density criterion and J-integral, and applying the rule of phase mixtures, a mathematical model was developed to predict critical value of J-integral in functionally graded steels with crack divider configuration. Finally, a good compatibility between the experimental results of the dynamic notch fracture toughness and those obtained from the proposed model was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Nazari · J. Mater. Sci. Technol. · 2011 · 27 · 44310.1016/S1005-0302(11)60089-3 ↗
2. Fracture of laser welded joints in the ductile-to-brittle transition10.1016/j.engfracmech.2006.11.011 ↗
3. Aghazadeh Mohandesi · Metal. Mater. Trans. A · 2005 · 36 · 347110.1007/s11661-005-0020-8 ↗
4. Nazari · Comput. Mater. Sci. · 2011 · 50 · 178110.1016/j.commatsci.2011.01.014 ↗
5. Nazari · Comput. Mater. Sci. · 2011 · 50 · 179110.1016/j.commatsci.2011.01.016 ↗
6. Nazari · Comput. Mater. Sci. · 2011 · 50 · 317810.1016/j.commatsci.2011.05.047 ↗
7. Nazari · Comput. Mater. Sci. · 2012 · 51 · 28110.1016/j.commatsci.2011.07.057 ↗
8. Nazari · Comput. Mater. Sci. · 2011 · 50 · 323810.1016/j.commatsci.2011.06.008 ↗
9. Nazari · Comput. Mater. Sci. · 2011 · 51 · 1310.1016/j.commatsci.2011.07.010 ↗
10. Barati · Eng. Fract. Mech. · 2010 · 77 · 334110.1016/j.engfracmech.2010.08.020 ↗
11. Rolfe · 1977
12. Pisarski · Weld. Inst. Res. Bull. · 1978 · 12 · 362
13. Hahn · 1968
14. Nageswara Rao · Eng. Fract. Mech. · 1992 · 41 · 8510.1016/0013-7944(92)90097-X ↗
15. Rolfe · 1970
16. Barsom · 1970
17. Norris · 1979
18. Chaouadi · Int. J. Press. Vess. Pip. · 2008 · 85 · 75210.1016/j.ijpvp.2008.08.004 ↗
19. Fengchun · Eng. Fract. Mech. · 2004 · 71 · 27910.1016/S0013-7944(03)00139-5 ↗
20. Kobayashi · Eng. Fract. Mech. · 1986 · 24 · 77310.1016/0013-7944(86)90249-3 ↗
21. ASTM E23 · 2001
22. Ruiz · Int. J. Fract. · 1985 · 29 · 10110.1007/BF00034296 ↗
23. ASTM E1820 · 2001
24. Nazari · Comput. Mater. Sci. · 2011 · 50 · 118710.1016/j.commatsci.2010.11.019 ↗
25. Lazzarin · Int. J. Fract. · 2005 · 135 · 16110.1007/s10704-005-3943-6 ↗
26. Yosibash · Int. J. Fract. · 2004 · 125 · 30710.1023/B:FRAC.0000022244.31825.3b ↗
27. Berto · Int. J. Solids Struct. · 2007 · 44 · 462110.1016/j.ijsolstr.2006.11.041 ↗
28. Seweryn · Eng. Fract. Mech. · 1994 · 47 · 67310.1016/0013-7944(94)90158-9 ↗
29. Lazzarin · Int. J. Solids Struct. · 2006 · 43 · 246110.1016/j.ijsolstr.2005.03.007 ↗
30. Berto · Theor. Appl. Fract. Mech. · 2009 · 52 · 18310.1016/j.tafmec.2009.10.001 ↗