Manganese effect on the microstructural transformation and mechanical properties of oxide dispersion strengthened steels fabricated with pre-alloyed powders
Source abstract
Abstract
Abstract The effect of Mn on the microstructure and mechanical properties of oxide dispersion strengthened (ODS) steels prepared with pre-alloyed powders were evaluated. Two sets of ODS steels with nominal compositions (wt. %) of Fe-2.9Cr-0.25Ti-0.1Y-0.3Y2O3-0.2C (labeled as PA0) and Fe–25Mn-2.9Cr-0.25Ti-0.1Y-0.3Y2O3-0.2C (labeled as PA25) were fabricated. The microstructures were systematically investigated using X-ray powder diffraction, electron backscatter diffraction, and transmission electron microscopy. Fine oxide nanoparticles (NPs) were observed in the matrices of both PA0 and PA25. However, few agglomerates of Y2Ti2O7 and TiMn2O4 were observed in PA25. Tensile and Charpy impact properties at room, subzero, and high temperatures were also examined. Tensile test results showed that the yield and ultimate strengths were higher in PA0 due to its finer oxide NPs. Conversely, PA25 showed a higher ductility and work hardening rate ascribed to the high number of mechanical twins in its austenitic matrix. Similarly, Charpy impact energies at both room and subzero temperatures were higher in PA25, which could be explained by the high number of mechanical twins and strain-induced e h c p -martensite transformation in PA25. We suggest that to prevent the formation of agglomerates and improve the mechanical properties of Mn-added ODS steel, Mn should be introduced not in the pre-mixed state, as was done here, but in the pre-alloyed state, which will be the focus of future studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. On the microstructure and strengthening mechanism in oxide disper- sion-strengthened 316 steel : a coordinated electron microscopy , atom probe tomography and in situ synchrotron tensile investigation10.1016/j.msea.2015.05.064 ↗
2. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
3. Creep response and deformation processes in nanocluster-strengthened ferritic steels10.1016/j.actamat.2007.11.038 ↗
4. Atomic structure of nanoclusters in oxide-dispersion-strengthened steels10.1038/nmat3150 ↗
5. Oxide dispersion-strengthened steels: a comparison of some commercial and experimental alloys10.1016/j.jnucmat.2005.01.017 ↗
6. Creep behavior and deformation mechanisms in a nanocluster strengthened ferritic steel10.1016/j.actamat.2011.11.057 ↗
7. IGSCC of grain boundary engineered 316L and 690 in supercritical water10.1016/j.jnucmat.2009.03.008 ↗
8. Influence of composition and microstructure on the corrosion behavior of different Fe–Cr–Al alloys in molten LBE10.1016/j.jnucmat.2011.11.049 ↗
9. Structural materials for Gen-IV nuclear reactors: challenges and opportunities10.1016/j.jnucmat.2008.08.044 ↗
10. Direct laser deposition of 14Cr oxide dispersion strengthened steel powders using Y2O3 and HFO2 dispersoids
11. Stability of Y-Ti-O nanoparticles during laser deposition of oxide dispersion strengthened steel powder10.1007/s12540-017-6832-4 ↗
12. Temperature dependence of the strength of fine- and ultrafine-grained materials10.1016/j.actamat.2010.10.062 ↗
13. Micro mechanic testing and local electrode atom probe microscope (LEAP) measurements on oxide dispersed strengthened (ODS) alloys
14. High temperature fracture characteristics of a nanostructured ferritic alloy (NFA)10.1016/j.jnucmat.2010.09.031 ↗
15. Influence of texture on impact toughness of ferritic Fe-20Cr-5Al oxide dispersion strengthened steel10.3390/ma10070745 ↗
16. Microstructural observation and tensile properties of ODS-304 austenitic steel10.1016/j.msea.2012.08.099 ↗
17. In situ synchrotron tensile investigations on the phase responses within an oxide dispersion-strengthened (ODS) 304 steel10.1016/j.msea.2014.12.017 ↗
18. Direct Interpretation of cryogenic-temperature Charpy impact toughness by microstructural evolution of dynamically compressed specimens in austenitic 0.4C–(22 – 26) Mn steels10.1016/j.actamat.2014.11.027 ↗
19. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe-Mn-Al-Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
20. Stacking fault energies in austenitic stainless steels10.1016/j.actamat.2016.03.042 ↗
21. Research progress on preparation technology of oxide dispersion strengthened steel for nuclear energy10.1088/2631-7990/abff1a ↗
22. Microstructure formation and mechanical properties of ODS steels built by laser additive manufacturing of nanoparticle coated iron-chromium powders10.1016/j.actamat.2020.116566 ↗
23. Infl uence of manganese on the microstructure and mechanical properties of oxide-dispersion-strengthened steels10.1016/j.matdes.2019.107997 ↗
24. Microstructure and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method10.1016/S0921-5093(04)00936-0 ↗
25. Effect of tellurium on the microstructure and mechanical properties of Fe-14Cr oxide-dispersion-strengthened steels produced by additive manufacturing10.1016/j.jmst.2021.03.068 ↗
26. Evolution of microstructure and mechanical properties of oxide dispersion strengthened steels made from water - atomized ferritic powder10.1007/s12540-018-0071-1 ↗
27. Effects of manufacturing process on impact properties and microstructures of ODS steels10.1016/j.jnucmat.2014.07.075 ↗
28. Powder metallurgy methods and applications, ASM handbook10.31399/asm.hb.v07.a0006022 ↗
29. Song
30. Microstructure and mechanical properties of an oxide dispersion strengthened ferritic steel by a new fabrication route10.1016/j.msea.2010.04.084 ↗
31. Study of the deformation and damage mechanisms of a 9Cr-ODS steel : microstructure evolution and fracture characteristics10.1016/j.msea.2016.01.109 ↗
32. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
33. Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction10.1080/14786430903304145 ↗
34. The dislocation behaviour and GND development in a nickel based superalloy during creep10.1016/j.ijplas.2019.02.015 ↗
35. Coupling of electron channeling with EBSD: toward the quantitative characterization of deformation structures in the sem10.1007/s11837-013-0678-0 ↗
36. Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
37. Ribis
38. Development of an oxide- by introducing oxygen carrier compound into the melt aided by a general thermodynamic model
39. Structural materials for Gen-IV nuclear reactors: challenges and opportunities10.1016/j.jnucmat.2008.08.044 ↗
40. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
41. The effect of grain size and grain orientation on deformation twinning in a Fe–22 wt.% Mn – 0 . 6 wt .% C TWIP steel10.1016/j.msea.2010.02.041 ↗
42. Effect of manganese on microstructure and mechanical properties of cast high alloyed CrMnNi-N steels10.1002/adem.201200318 ↗
43. Grain size effect on the martensite formation in a high-manganese TWIP steel by the rietveld method10.1016/S1005-0302(10)60030-8 ↗
44. Structure and microstructure evolution during martensitic transformation in wrought Fe–26Mn–0.14C austenitic steel : an effect of cooling rate10.1107/S0021889807005882 ↗
45. Identification of e-martensite in a Fe-based shape memory alloy by means of EBSD10.1016/j.micron.2007.12.012 ↗
46. Dynamic recrystallization and grain refinement of Fe-P-C-Si and Fe-P-C-Si-N steels10.1007/s11665-018-3531-3 ↗
47. On kinetics of grain refinement and strengthening by dynamic recrystallization
48. Deformation, processing and structure
49. Heidarzadeh · 2014 · 65
50. Recovery and recrystallization: phenomena, physics, models, simulation
51. The materials project. Reaction Calculator [Online]. Available: https://www.materialsproject.org/apps/reaction_calculator/., (n.d.).
52. Influence of the low interfacial density energy on the coarsening resistivity of the nano-oxide particles in Ti-added ODS material10.1016/j.jnucmat.2012.10.051 ↗
53. Incorporation of slip dislocations in mechanical twins
54. The effect of grain size on the twin initiation stress in a TWIP steel10.1016/j.actamat.2015.02.008 ↗
55. Deformation twinning (update)
56. Effect of temperature on mechanical behaviour of high manganese TWIP steel
57. Stacking fault energies in austenitic stainless steels10.1016/j.actamat.2016.03.042 ↗
58. The effect of the addition of alloying elements on carbide precipitation and mechanical properties in 5 % chromium martensitic steels10.1016/j.actamat.2007.05.004 ↗
59. Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: Part II-Mechanistic models and predictions10.1016/j.msea.2012.08.041 ↗
60. Size and orientation effects in partial dislocation-mediated deformation of twinning-induced plasticity steel micro-pillars10.1016/j.actamat.2015.06.065 ↗