journal article·2021-10

Improved microstructures and mechanical properties for 7085Al alloy subjected to slow quenching by aging treatment

Hongyu Xiao, Jiwei Geng, Yugang Li, Zhiping Wang, Qing Yang, Hongping Li, Mingliang Wang, Dong Chen, Zhuguo Li, Haowei Wang

Publisher page

Abstract

Abstract The precipitation behaviors and mechanical properties of the slowly-quenched 7085Al alloy subjected to various aging treatments were studied by multi-scale microstructural and mechanical properties characterization techniques. There were coarse quench-induced precipitates (QIPs) including η phases and lath-shaped S phases identified at grain boundaries and Al3Zr particle interfaces during the slow quenching process. Both precipitate free zone and precipitate rich zone were characterized in the slowly-quenched samples after various aging treatments. It was found that the average size of the age-induced precipitates (AIPs) after the double-step aging treatment (D3) was finer, and the number density of the AIPs was larger than those after the single-step aging treatment (S1). Meanwhile, the precipitate free zones around the coarse QIPs and at grain boundaries became narrower in the D3 sample. Critically, the heterogeneous nucleation of η′ phase on the lath-shaped S phase which was previously unreported has been characterized. The orientation relationship between the η’ phase and S phase was determined, and the detailed mechanism was discussed based on heterogeneous nucleation theory. Furthermore, the yield strength and ultimate tensile strength of the D3 sample increased by ∼94.4 MPa and ∼65.9 MPa over the S1 sample, respectively. Finally, the underlying mechanisms of such yield strength variations were discussed. The mixture rule was used to model this microstructure-mechanical property relationship quantitatively, in which the calculated results showed the good agreement with the measured results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
2. Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050)10.1016/j.actamat.2004.06.025 ↗
3. GP-zones in Al-Zn-Mg alloys and their role in artificial aging10.1016/S1359-6454(01)00251-8 ↗
4. Effect of precipitation during quenching on the mechanical properties of the aluminium alloy 7010 in the W-temper10.1016/j.jmatprotec.2004.04.226 ↗
5. Predicting the quench sensitivity of Al–Zn–Mg–Cu alloys: a model for linear cooling and strengthening10.1016/j.matdes.2015.09.058 ↗
6. Precipitation sequences during quenching of the AA 7010 alloy10.1016/S1359-6454(02)00063-0 ↗
7. Quench sensitivity of AA 7136 alloy: contribution of grain structure and dispersoids10.1007/s11661-019-05397-5 ↗
8. Effect of compositions on the quenching sensitivity of 7050 and 7085 alloys10.1016/j.msea.2016.04.095 ↗
9. Effects of Ge and Ag additions on quench sensitivity and mechanical properties of an Al–Zn–Mg–Cu alloy10.1016/j.msea.2016.11.092 ↗
10. Effect of microstructure on the quench sensitivity of AlZnMgCu alloys10.1016/j.jallcom.2010.07.124 ↗
11. Effect of processing parameters on quench sensitivity of an AA7050 sheet10.1016/j.msea.2010.07.033 ↗
12. The effect of two-step aging on the quench sensitivity of an Al-5 Pct Zn-2 Pct Mg alloy with and without 0.1 Pct Cr10.1007/BF02642024 ↗
13. Influence of aging on quench sensitivity effect of 7055 aluminum alloy10.1016/j.matchar.2006.10.019 ↗
14. Modelling of heterogeneous precipitate distribution evolution during friction stir welding process10.1016/j.actamat.2005.12.024 ↗
15. Influence of cooling rate on the precipitation microstructure in a medium strength Al-Zn-Mg alloy10.1016/j.msea.2008.09.067 ↗
16. The determination of foil thickness by scanning transmission electron microscopy10.1002/pssa.2210310251 ↗
17. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
18. Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys10.1016/j.actamat.2020.10.021 ↗
19. In situ observations of the nucleation and initial growth of grain boundary precipitates in an Al-Zn-Mg alloy10.1016/0001-6160(76)90009-2 ↗
20. On the coarsening of grain boundary precipitates10.1016/0001-6160(72)90015-6 ↗
21. Effects of Cu content on the precipitation process of Al–Zn–Mg alloys10.1007/s10853-012-6714-6 ↗
22. Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425 C10.1016/j.actamat.2007.09.004 ↗
23. Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy10.1016/j.matchar.2015.02.016 ↗
24. Three-stage homogenization of Al-Zn-Mg-Cu alloys containing trace Zr10.1007/s11661-013-1639-5 ↗
25. Coherency loss of Al3(Sc,Zr) precipitates by deformation of an Al–Zn–Mg alloy10.1016/j.actamat.2012.04.011 ↗
26. Effect of recrystallisation on Al3Zr dispersoid behaviour in thick plates of aluminium alloy aa715010.1007/s10853-013-7856-x ↗
27. Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys10.1179/174328005X14357 ↗
28. Continuous cooling precipitation diagram of aluminium alloy AA7150 based on a new fast scanning calorimetry and interrupted quenching method10.1016/j.matchar.2016.08.016 ↗
29. Precipitation of a new platelet phase during the quenching of an Al-Zn-Mg-Cu alloy10.1038/srep23109 ↗
30. Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy10.1016/j.matdes.2017.06.054 ↗
31. Quench sensitivity of toughness in an Al alloy: direct observation and analysis of failure initiation at the precipitate-free zone10.1016/j.actamat.2008.02.021 ↗
32. Relation between precipitate-free zone width and grain boundary type in 7075-T7 Al alloy10.1016/j.actamat.2006.10.015 ↗
33. A study of grain boundary precipitate-free zone formation in an Al−Zn−Mg alloy10.1007/BF02811608 ↗
34. The origin of the grain boundary precipitate free zone10.1016/0001-6160(69)90154-0 ↗
35. Variant selection and the strengthening effect of S precipitates at dislocations in Al–Cu–Mg alloy10.1016/j.actamat.2010.12.041 ↗
36. Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy10.1016/j.actamat.2018.02.045 ↗
37. Modelling the overlap of nucleation, growth and coarsening during precipitation10.1016/j.actamat.2004.06.024 ↗
38. Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments10.1016/S1359-6454(03)00429-4 ↗
39. Determination of the effective vacancy concentrations and the vacancy losses after the quench of Al–Zn–Mg alloys10.1002/crat.2170260117 ↗
40. Christian · 2002
41. The effect of minor solute additions on the precipitation path of an Al-Cu-Li alloy10.1016/j.actamat.2016.05.050 ↗
42. Zn segregation in interface between Mg17Al12 precipitate and Mg matrix in Mg–Al–Zn alloys10.1016/j.scriptamat.2019.01.001 ↗
43. Determination of interfacial atomic structure, misfits and energetics of Ω phase in Al-Cu-Mg-Ag alloy10.1016/j.actamat.2014.07.074 ↗
44. Influence of predeformation and agEing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
45. The role of quench rate on the plastic flow and fracture of three aluminium alloys with different grain structure and texture
46. Coupling of dislocations and precipitates: impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys10.1016/j.actamat.2015.09.017 ↗
47. Structure-property models in Al-Zn-Mg-Cu alloys: a critical experimental assessment of shape castings10.1016/j.msea.2018.07.048 ↗
48. Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al–Mg–Si alloys10.1016/j.actamat.2015.07.039 ↗
49. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
50. Bigot · Mater. Sci. Forum · 1996 · 217–222 · 69510.4028/www.scientific.net/MSF.217-222.695 ↗
51. Hall · Proc. Phys. Soc. B · 1951 · 64 · 74710.1088/0370-1301/64/9/303 ↗
52. Dixit · Mater. Sci. Eng. A · 2008 · 478 · 16310.1016/j.msea.2007.05.116 ↗
53. Overview no. 102 Theory assisted design of high strength low alloy aluminum10.1016/0956-7151(93)90334-O ↗
54. Dislocation dynamics and dynamic yielding10.1063/1.1702940 ↗