journal article·2021-08

Micro-cantilever testing of microstructural effects on plastic behavior of Ti–6Al–4V alloy

Yukimi Tanaka, Koichiro Hattori, Yoshihisa Harada

Publisher page

Abstract

Abstract To evaluate the effects of microstructural factors on the plastic behavior of Ti–6Al–4V alloys, micro-cantilevers featuring several grains were machined using a focused ion beam. The equiaxed structure (a mixture of equiaxed α phase and intergranular β phase) and bimodal structure (a mixture of an equiaxed α phase and lamellar phase) were examined to verify the microstructural effects. To determine the slip plane and direction, the crystal structure was evaluated using electron backscattered diffraction, following bending tests of the microcantilever. In addition, the elastic modulus and hardness of each grain were determined via nanoindentation testing. In the equiaxed microstructure, the β-phase deformation often occurred first; then, slips were activated inside the equiaxed α phase. It is concluded that the β phase deforms more easily than the α phase because the elastic modulus and hardness of the former are lower, as indicated by the nanoindentation testing. In the bimodal microstructure, β-lath deformation occurred along the acicular direction in the lamellar-phase region, and slips occurred inside the α grain. The deformation of the lamellar structure was associated with β-phase deformation and affected by the high local stress at the grain boundary and phase interface, owing to the difference in grain orientation within the lamellar structure. The results of this study suggest that the plastic behavior of Ti–6Al–4V alloys depends not only on the slip system of the α grains but also on the deformability of the β phase and the misorientation of adjacent grains in polycrystalline Ti–6Al–4V alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Polmear · 2017
2. Titanium alloys
3. Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: bimodal vs. lamellar structures10.1007/s11661-002-0160-z ↗
4. Effect of microstructure on the fatigue properties of Ti–6Al–4V titanium alloys10.1016/j.matdes.2012.10.059 ↗
5. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti–6Al–4V alloy10.1016/j.actamat.2019.07.025 ↗
6. A microcantilever investigation of size effect, solid-solution strengthening and second-phase strengthening for prism slip in alpha-Ti10.1016/j.actamat.2011.06.005 ↗
7. dislocations in deformed Ti–6Al–4V micro-cantilevers10.1016/j.actamat.2014.05.010 ↗
8. A study of dislocation transmission through a grain boundary in hcp Ti–6Al using micro-cantilevers10.1016/j.actamat.2015.10.023 ↗
9. Anisotropy of slip behaviour in single-colony lamellar structures of Ti–6Al–4V10.1016/j.msea.2018.01.013 ↗
10. Anisotropy of strength and plasticity in single-colony lamellar structure of Ti–6Al–4V alloy10.1016/j.scriptamat.2019.10.016 ↗
11. Microplasticity at room temperature in α/β titanium alloys10.1007/s11661-020-05945-4 ↗
12. Contributions of microstructural features to the integrated hardness of TA15 titanium alloy10.1016/j.msea.2014.12.087 ↗
13. Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V10.1016/j.msea.2018.06.019 ↗
14. Influence of alloy element partitioning on strength of primary α phase in Ti-6Al-4V alloy10.1016/j.jmst.2017.07.016 ↗
15. Optimising mechanical properties in alpha + beta titanium alloys10.1016/S0921-5093(97)00784-3 ↗
16. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
17. Demonstration of an in situ microscale fatigue testing technique on a titanium alloy10.1016/j.ijfatigue.2012.08.008 ↗
18. Three-dimensional local stress analysis on grain boundaries in polycrystalline material10.1016/j.ijsolstr.2006.09.020 ↗
19. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
20. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
21. Fischer-Cripps · 2004
22. On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals10.1098/rspa.2014.0881 ↗
23. Stress concentrations at grain boundaries due to anisotropic elastic material behavior
24. Slip band–grain boundary interactions in commercial-purity titanium10.1016/j.actamat.2014.05.015 ↗
25. An experimental assessment of grain size effects in the uniaxial straining of thin Al sheet with a few grains across the thickness10.1016/j.msea.2005.12.029 ↗
26. Slip-stimulated grain boundary sliding in Ti-6Al-4V at room temperature10.1016/j.mtla.2018.100189 ↗
27. Analysis of deformation mechanisms operating under fatigue and dwell fatigue loadings in an α/β titanium alloy10.1016/j.ijfatigue.2019.105341 ↗
28. The role of β-titanium ligaments in the deformation of dual phase titanium alloys10.1016/j.msea.2019.01.032 ↗
29. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
30. Deformation and creep modeling in polycrystalline Ti–6Al alloys10.1016/S1359-6454(03)00289-1 ↗
31. Discrete dislocation and crystal plasticity analyses of load shedding in polycrystalline titanium alloys10.1016/j.ijplas.2016.08.009 ↗
32. Analysis of microbending tests for polycrystalline materials using the modified strain gradient theory10.1016/j.ijsolstr.2012.04.011 ↗
33. Near boundary gradient zone and sensitization control in austenitic stainless steel10.1016/j.corsci.2015.08.027 ↗