Effect of subfreezing testing temperature on tensile mechanical behavior of fine-grained magnesium
Source abstract
Abstract
Abstract The effect of testing temperature on mechanical properties and deformation mechanisms was investigated by tensile testing of fine-grained magnesium samples under a range of temperatures (i.e. room temperature 20 °C, subfreezing temperatures 0 °C, −30 °C, and −60 °C) and microstructural observations of both untested and tested samples using electron backscatter diffraction. The results suggest that mechanical properties and deformation mechanisms were significantly affected by the variation of testing temperature. Strength increased linearly and ductility decreased linearly with the decrease of testing temperature. Although twinning is generally known to be athermal, this experimental study shows that tensile twinning is the dominating deformation mechanism at room temperature, and that twinning is negligible and dislocation operation is the primary deformation mechanism at 0 °C, −30 °C, and −60 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Synthesis and characterisation of magnesium matrix composite reinforced with titanium dioxide nanoparticulates10.1088/2053-1591/ab6ca3 ↗
2. Effect of porosity and carbon composition on pore microstructure of magnesium/carbon nanotube composite foams10.1016/j.matdes.2015.09.134 ↗
3. Carbon nanotube reinforced porous magnesium composite: 3D nondestructive microstructure characterization using x-ray micro-computed tomography10.1016/j.matlet.2014.06.146 ↗
4. Recrystallization mechanism and activation energies of severely-deformed magnesium during annealing process10.1016/j.mtla.2018.100188 ↗
5. Microstructure, mechanical properties and static recrystallization behavior of the rolled ZK60 magnesium alloy sheets processed by electropulsing treatment10.1016/j.jallcom.2015.04.196 ↗
6. On the diversity of the plastic response of magnesium in plane strain compression10.1016/j.msea.2015.10.108 ↗
7. Fatigue behavior and microstructure of 0001 and 1̄014 magnesium single crystals under compression–compression cyclic loading10.1016/j.msea.2012.06.091 ↗
8. Fracture behavior of twin induced ultra-fine grained ZK61 magnesium alloy under high strain rate compression10.1016/j.jmrt.2019.06.018 ↗
9. The influence of stress concentrators on the magnesium alloy mechanical behavior under deformation at high strain rates in the temperature range from 295 to 673 K
10. Exploration of equal channel angular pressing routes for efficiently achieving ultrafine microstructure in magnesium10.1016/j.msea.2018.07.041 ↗
11. Microstructure and deformation mechanism of Mg6Al1ZnA alloy experienced tension–compression cyclic loading10.1016/j.scriptamat.2010.10.017 ↗
12. Dislocation mechanics of high-rate deformations10.1007/s11661-015-2779-6 ↗
13. Nanostructured extension twins in rapidly compressed Mg-3.0Al-1.0Zn alloy10.1016/j.msea.2014.07.008 ↗
14. Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction10.1016/j.actamat.2014.11.030 ↗
15. Microstructure and deformation mechanism of 0 0 0 1 magnesium single crystal subjected to quasistatic and high-strain-rate compressiveloadings10.1016/j.msea.2013.01.028 ↗
16. Simultaneous effects of strain rate and temperature on mechanical response of fabricated Mg–SiC nanocomposite10.1177/0021998319864629 ↗
17. Characterization of hot deformation behavior and processing maps of Mg-3Sn-2Al-1Zn-5Li magnesium alloy10.3390/met9121262 ↗
18. Shock response of commercial purity polycrystalline magnesium under uniaxial strain at elevated temperatures10.1007/s40870-017-0128-0 ↗
19. The fatigue and ultimate tensile strengths of metals between 4.2 and 293 deg. K
20. Low temperature fatigue fracture of metals and alloys10.1016/0025-5416(83)90041-1 ↗
21. Grinberg · 1979 · 15 · 17
22. 2019
23. Mechanical properties and microstructure of pure polycrystalline magnesium rolled by different routes10.1016/j.matlet.2011.09.040 ↗
24. Avedesian · 1999
25. Microstructure, mechanical properties and deformation mechanisms of an as-cast Mg–Zn–Y–Nd–Zr alloy for stent applications10.1016/j.jmst.2019.01.007 ↗
26. Effects of icosahedral phase on mechanical anisotropy of as-extruded Mg-14Li (in wt%) based alloys10.1016/j.jmst.2019.07.028 ↗