Effects of remelting and refining on the microstructure and properties of particle reinforced magnesium-lithium matrix composites
Source abstract
Abstract
Abstract Particle reinforced magnesium-lithium matrix composite ingot was remelted and refined using a special 100Kg level vacuum induction melting system. The evolution of microstructure, mechanical properties and homogeneity of ingot before and after remelting and refining was described and analyzed based on quantitative characterization. The refining mechanism was also explored. The results show that the secondary mechanical stir effect in the remelting process can purify the melt and reduce casting defects, significantly improve the distribution homogeneity and effectively reduce the aggregation of reinforcement particles. After the remelting and refining of YAl2p/LA143 composite ingot, the homogeneity factor ζPD of reinforcement distribution increases by 22.8%, the area proportion of particle blocky aggregates decreases by 91.4%. The obvious atomic thermal diffusion effect between reinforcement phase and matrix phase was observed during the remelting and refining process. The element distribution of interface zone between reinforcement phase and matrix alloy phase shows a gentle curve transition after remelting and refining, which forms an excellent transition interface. Under the effects of secondary mechanical stir and atomic heat diffusion, the mechanical properties of YAl2p/LA143 composite remelting ingot are effectively improved, and the tensile strength, yield strength and elongation increase by 11.3%, 10.2% and 400%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Recent progress in Mg-Li matrix composites10.1016/S1003-6326(18)64909-X ↗
2. Strengthening in Mg-Li matrix composites10.1016/j.compscitech.2006.10.007 ↗
3. Phase stability, mechanical property, and electronic structure of Mg-Li system10.1016/j.jallcom.2009.09.032 ↗
4. Recent progress of reinforcement materials: a comprehensive overview of composite materials10.1016/j.jmrt.2019.09.068 ↗
5. Microstructural evolution in an ultra-fine YAl2p reinforced Mg-14Li-3Al composite during warm-rolling10.1016/j.matchar.2015.04.010 ↗
6. A novel method to control agglomeration of ultrafine YAl2 particles in YAl2p/MgLiAl composite10.1016/j.matlet.2010.09.028 ↗
7. Macro- and microstructure evolution of 5CrNiMo steel ingots during electroslag remelting10.1016/S1006-706X(14)60100-X ↗
8. Effect of remelting and annealing on the wear resistance of AlCoCrFeNiTi0.5 high entropy alloys10.1016/j.intermet.2019.106560 ↗
9. Solidification in remelting processes10.1016/j.msea.2005.08.157 ↗
10. Properties of AlSi9Mg alloy matrix composite reinforced with short carbon fibre after remelting10.1515/afe-2015-0056 ↗
11. Synthesis and characterization of 356-SiCp composites by stir casting and compocasting methods10.1016/S1003-6326(10)60582-1 ↗
12. Experimental inspection of aluminium matrix composites reinforced with SiC particles fabricated through ultrasonic assisted stir casting process
13. Nano-SiCp particles distribution and mechanical properties of Al-matrix composites prepared by stir casting and ultrasonic treatment10.1007/s41230-018-8009-2 ↗
14. Influence of remelting on microstructure,hardness and corrosion behaviour of AlCoCrFeNiTihigh entropy alloy10.1179/1743284715Y.0000000029 ↗
15. “Numerical study of the effects of reinforcement/matrix interphase on stress–strain behavior of YAl2 particle reinforced MgLiAl composites10.1016/j.compositesa.2011.12.010 ↗
16. Effects of particle/matrix interfaces on the mechanical properties for SiCp or YAl2p reinforced Mg-Li composites10.1016/j.jallcom.2013.11.004 ↗