journal article·2020-04

Measurements of fracture properties of MWCNTs modified LiNi0.5Mn0.3Co0.2O2 electrodes by a modified shear lag model

Weiguo Mao, Xiaoxue Zhu, Zhouqing Zhang, Huiyu Huang, Cuiying Dai, Junan Pan, Yong Pan, Xi Chen, Daining Fang

Publisher page

Abstract

Abstract The multi-walled carbon nanotubes (MWCNTs) modified LiNi0.5Mn0.3Co0.2O2 (NMC532) electrodes were prepared by using blade-coated method. The corresponding microstructure morphology were observed by scanning microscopy electron. The impedance spectroscopy and cycle performances of the electrodes with different MWCNTs contents were measured and discussed. Tensile fracture measurements of the electrodes were performed with the aid of digital image correlation technique. The cracking nucleation and propagation on the active layer surface were in situ monitored. A modified shear lag model was developed to analyze the fracture strength, fracture energy and fracture toughness of the active layer during tensions. The effect of MWCNTs on tensile failure mechanisms of two-layered NMC532 electrodes was discussed. The proposed method is useful for appraising the mechanical properties of other advanced active layers in lithium ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Ferroelectric and Piezoelectric Materials · Electrical and Thermal Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
3. Design of complex nanomaterials for energy storage: past success and future opportunity10.1021/acs.accounts.7b00450 ↗
4. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
5. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
6. Why do batteries fail?
7. A review on modeling of electro-chemo-mechanics in lithium-ion batteries10.1016/j.jpowsour.2018.12.011 ↗
8. Electrochemomechanical degradation of high-capacity battery electrode materials10.1016/j.pmatsci.2017.04.014 ↗
9. Liquid-phase electrochemical scanning electron microscopy for in situ investigation of lithium dendrite growth and dissolution10.1002/adma.201606187 ↗
10. In situ scanning electron microscopy of silicon anode reactions in lithium-ion batteries during charge/discharge processes10.1038/srep36153 ↗
11. Advances in sealed liquid cells for in-situ TEM electrochemial investigation of lithium-ion battery10.1016/j.nanoen.2014.11.004 ↗
12. In situ observation of the electrochemical lithiation of a single SnO2 nanowire electrode10.1126/science.1195628 ↗
13. Understanding phase transformation in crystalline Ge anodes for Li-ion batteries10.1021/cm501233k ↗
14. In situ X-ray diffraction studies of (de)lithiation mechanism in silicon nanowire anodes10.1021/nn301339g ↗
15. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
16. In-situ measurements of mechanical and volume change of LiCoO2 lithium-ion batteries during repeated charge–discharge cycling by using digital image correlation10.1016/j.measurement.2016.09.023 ↗
17. In situ measurements of strains in composite battery electrodes during electrochemical cycling10.1007/s11340-014-9873-3 ↗
18. A platform for in situ Raman and stress characterizations of V2O5 cathode using MEMS device10.1016/j.electacta.2017.04.160 ↗
19. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation10.1016/j.jpowsour.2010.02.013 ↗
20. Electrochemical stiffness in lithium-ion batteries10.1038/nmat4708 ↗
21. Anisotropic viscoplasticity and fracture of fine grained metallic aluminum foil used in Li-ion batteries10.1016/j.msea.2015.11.048 ↗
22. Mechanical characterization and modeling for anodes and cathodes in lithium-ion batteries10.1016/j.jpowsour.2018.05.007 ↗
23. Investigation of the deformation mechanisms of lithium-ion battery components using in-situ micro tests10.1016/j.apenergy.2018.05.007 ↗
24. Effects of cycle times and C-rate on mechanical properties of copper foil and adhesive strength of electrodes in commercial LiCoO2 LIBs10.1016/j.engfailanal.2019.03.015 ↗
25. Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios10.1016/j.jpowsour.2016.04.005 ↗
26. Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions10.1016/j.jpowsour.2013.09.128 ↗
27. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity10.1016/j.jpowsour.2011.10.094 ↗
28. Mechanical behavior of lithium-ion battery component materials and error sources analysis for test results10.4271/2016-01-0400 ↗
29. Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries10.1016/j.jpowsour.2017.04.103 ↗
30. Strength, strain-rate sensitivity and ductility of copper with nanoscale twins10.1016/j.actamat.2006.06.062 ↗
31. Mechanical property evolution of silicon composite electrodes studied by environmental nanoindentation10.1002/aenm.201702578 ↗
32. Microstructure and mechanical properties of nucleant-free Li2O-CaO-SiO2 glass-ceramics10.1016/j.actamat.2017.03.010 ↗
33. Softening by electrochemical reaction-induced dislocations in lithium-ion batteries10.1016/j.scriptamat.2016.08.032 ↗
34. Fracture toughness characterization of lithiated germanium as an anode material for lithium-ion batteries10.1149/2.0271602jes ↗
35. Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries10.1016/j.eml.2016.03.002 ↗
36. A new method for analyzing data from continuous depth-sensing microindentation tests
37. Indentation of elastically anisotropic half-spaces by cones and parabolae of revolution10.1080/01418610108214314 ↗
38. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Theoretical strength and the onset of plasticity in bulk metallic glasses investigated by nanoindentation with a spherical indenter10.1103/PhysRevLett.93.125504 ↗
40. A multilayer structure shear lag model applied in the tensile fracture characteristics of supersonic plasma sprayed thermal barrier coating systems based on digital image correlation10.1016/j.surfcoat.2018.07.013 ↗
41. Evaluation of the adhesion strength in DLC film-coated systems using the film-cracking technique10.1163/156856198X00632 ↗
42. Multiple film cracking in film/substrate systems with residual stresses and unidirectional loading10.1023/A:1023200415364 ↗
43. The relationship between thin film fragmentation and buckle formation: synchrotron-based in situ studies and two-dimensional stress analysis10.1016/j.actamat.2008.11.023 ↗
44. Microstructure and electrochemical performance of LiNi0.6Co0.4-xMnxO2 cathode materials10.1016/j.jpowsour.2004.12.001 ↗
45. Effect of Mn content on the microstructure and electrochemical performance of LiNi0.75-xCo0.25MnxO2 cathode materials10.1149/1.1952687 ↗
46. High-temperature elastic moduli of thermoelectric SnTex – SiC nanoparticulate composites
47. In situ characterizations of mechanical behaviors of freestanding (Gd0.9Yb0.1)2Zr2O7 coatings by bending tests under different temperatures based on digital image correlation10.1016/j.jeurceramsoc.2019.07.031 ↗
48. Fracture characteristics of freestanding 8wt% Y2O3–ZrO2 coatings by single edge notched beam and Vickers indentation tests10.1016/j.msea.2013.05.086 ↗
49. A novel modification of carbon nanotubes for improving the electrical and mechanical properties of polyethylene composites10.1016/j.polymertesting.2018.12.018 ↗