Thermal behaviour of TIG arc surfacing affecting mechanical properties of AISI 4340 steel substrate under static and dynamic loading
Source abstract
Abstract
Abstract Surface modification of medium carbon AISI 4340 structural steel using TIG arcing process under various heat input (Ω) of varying arcing current (I) and arc travel speed (S) has been studied. Weld isotherm and thermal cycle of the fused zone has been analytically established and validated with experimentally measured results. TIG arcing process has been found to change the microstructural characteristics of the fusion modified matrix by transformation of fine niddle shape martensite, which has significantly enhanced its hardness from 256 ± 10 HV to 745 ± 8 HV and thus its mechanical properties. Formation of residual stresses in the surface modified the substrate is examined by hole drill method up to a depth of 1.3 mm. A residual stress of tensile nature is found to exist up to an appreciable depth from the top modified of the substrate, which has adversely affected its static and dynamic properties by enhancement of resolved stress in the matrix during the bend test. Surface modification improves flexural properties of the substrate with a maximum improvement of flexural yield strength at a relatively slow arc travel speed of 6 cm/min, while the Ω lies in the range of 0.6–1.21 kJ/mm. A favourable to improvement in static and dynamic properties of the substrate were found at relatively higher Ω of TIG arcing at slower S. It has primarily happened due to development of relatively slower cooling rate in the matrix introducing comparatively ductile lath martensite in it.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications10.1016/j.ceramint.2014.06.017 ↗
2. Diffusion behavior of carbon and its hardening effect on plasma carburized M50NiL steel: influences of treatment temperature and duration10.1016/j.surfcoat.2017.10.068 ↗
3. Nanomechanical properties of iron nitrides produced on 42CrMo4 steel by controlled gas nitriding and laser heat treatment10.1016/j.jallcom.2017.02.220 ↗
4. Surface hardening of 30CrMnSiA steel using continuous electron beam10.1016/j.nimb.2017.08.014 ↗
5. 2.5 laser beam processing for surface modifications
6. Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel10.1016/j.triboint.2017.05.028 ↗
7. Effect of initial surface treatment on shot peening residual stress field: analytical approach with experimental verification10.1016/j.ijmecsci.2018.01.022 ↗
8. Przybylowicz · 1999
9. Nemkov · 2004
10. A study on surface modification of Al7075-T6 alloy against fretting fatigue phenomenon
11. Grind-hardening: a comprehensive view10.1016/S0007-8506(07)63178-3 ↗
12. Surface modification of micro-alloyed high-strength low-alloy steel by controlled TIG arcing process10.1007/s11661-014-2670-x ↗
13. Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique10.1179/1743284713Y.0000000481 ↗
14. Thermal and metallurgical characteristics of surface modification of AISI 8620 steel produced by TIG arcing process10.1016/j.jmatprotec.2016.10.020 ↗
15. Surface modification of AISI 4340 steel by multi-pass TIG arcing process10.1016/j.jmatprotec.2017.06.035 ↗
16. TIG arc processing improves tensile and fatigue properties of surface modified of AISI 4340 steel10.1016/j.ijfatigue.2018.06.036 ↗
17. Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources
18. Analytical studies on thermal behaviour and geometry of weld pool in pulsed current gas metal arc welding10.1016/j.jmatprotec.2008.03.035 ↗
19. On the prediction of effect of direction of welding on bead geometry and residual deformation of double-sided fillet welds10.1007/s13296-016-6007-z ↗
20. Standard test methods for bend testing of metallic Flat materials for spring applications involving static loading
21. Standard Practice for statistical analysis of linear or linearized stress-life (S-N) and strain-life (′ -N) fatigue Data 1
22. Determining residual stresses by the hole-drilling strain-gage method
23. L. Tokyo Sokki Kenkyujo Co., http://www.tml.jp/e/product/strain_gauge/gauge_list/f_list.html, (n.d.).
24. Messler · 1999
25. Sharma · 2019
26. Surface hardening by in-situ grown composite layer on microalloyed steel employing TIG arcing process10.1016/j.surfcoat.2018.08.009 ↗
27. Residual stress measurements in laser clad repaired low pressure turbine blades for the power industry
28. Effect of weld consumable conditioning on the diffusible hydrogen and subsequent residual stress and flexural strength of multipass welded P91 steels10.1007/s11663-018-1314-8 ↗
29. On the estimation of error in measuring the residual stress by strain gauge rosette10.1016/j.measurement.2014.12.047 ↗
30. A comparative study of transverse shrinkage stresses and residual stresses in P91 welded pipe including plasticity error10.1016/j.acme.2018.02.007 ↗