journal article·2019-11

Correlation between microstructure and deformation mechanism in Ti66Nb13Cu8Ni6.8Al6.2 composites at ambient and elevated temperatures

L.H. Liu, C. Yang, W.W. Zhang, Z.Y. Xiao, L.C. Zhang

Publisher page

Abstract

Abstract In this study, Ti66Nb13Cu8Ni6.8Al6.2 composites with equiaxed and Widmanstatten microstructure matrixes were prepared by sintering amorphous and crystalline powder, respectively. The alloy with Widmanstatten structure exhibits lower yield and fracture strengths at ambient temperature but higher values at elevated temperatures compared with that with equiaxed structure. Microscopic deformation mechanisms of the alloys with different microstructures were investigated by scanning electron microscope (SEM), transmission electron microscope (TEM) and numerical simulation. The results indicate that the profuse dislocation pile-ups and formation of nanotwins in the β-Ti matrix contribute to the high room-temperature strength and plasticity of the composite with equiaxed β-Ti structure matrix, while stress concentration and cracking in the interior of acicular (Cu, Ni)Ti2 phases in Widmanstatten structure matrix deteriorates plastic deformation capacity of the alloy. The higher strength and plasticity for the composite with Widmanstatten structure matrix at elevated temperature is ascribed to dislocation pile-ups around grain boundaries of β-Ti and acicular (Cu, Ni)Ti2 phases and the curving of acicular (Cu, Ni)Ti2 phases inside Widmanstatten structure matrix. The results obtained provide some guidelines to design high-temperature alloy with excellent properties for structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys
2. Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite10.1038/srep06500 ↗
3. Novel Ti-base nanostructure-dendrite composite with enhanced plasticity10.1038/nmat792 ↗
4. Composition dependence of the microstructure and the mechanical properties of nano/ultrafine-structured Ti-Cu-Ni-Sn-Nb alloys10.1016/j.actamat.2004.03.006 ↗
5. Investigation of Ti-Fe-Co bulk alloys with high strength and enhanced ductility10.1016/j.actamat.2005.01.012 ↗
6. Ductile ultrafine-grained Ti-based alloys with high yield strength
7. High strength Ti-Fe-Sn ultrafine composites with large plasticity10.1016/j.scriptamat.2007.03.031 ↗
8. Nanostructured Zr- and Ti-based composite materials with high strength and enhanced plasticity10.1063/1.2012507 ↗
9. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
10. Microstructure and mechanical properties of new composite structured Ti-V-Al-Cu-Ni alloys for spring applications10.1016/j.msea.2014.02.070 ↗
11. Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity10.1016/j.matdes.2018.05.035 ↗
12. Improving the plasticity and strength of Fe-Nb-B ultrafine eutectic composite10.1016/j.matdes.2015.03.053 ↗
13. Effect of length scale on mechanical properties of Al-Cu eutectic alloy10.1063/1.4761944 ↗
14. High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity10.1557/jmr.2009.0297 ↗
15. High strength beta titanium alloys: new design approach10.1016/j.msea.2015.01.073 ↗
16. Significant tensile ductility and toughness in an ultrafine-structured Ti68.8Nb13.6Co6Cu5.1Al6.5 bi-modal alloy10.1016/j.msea.2014.07.108 ↗
17. Mechanical behavior and tensile/compressive strength asymmetry of ultrafine structured Ti-Nb-Ni-Co-Al alloys with bi-modal grain size distribution10.1016/j.matdes.2014.05.007 ↗
18. Phase formation, microstructure and deformation behavior of heavily alloyed TiNb-and TiV-based titanium alloys10.1016/j.msea.2018.07.047 ↗
19. Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility10.1016/j.msea.2016.11.082 ↗
20. A new insight into high-strength Ti62Nb12.2Fe13.6Co6.4Al5.8 alloys with bimodal microstructure fabricated by semi-solid sintering10.1038/srep23467 ↗
21. Equiaxed grained structure: a structure in titanium alloys with higher compressive mechanical properties10.1016/j.msea.2013.05.066 ↗
22. Intrinsic relationship between crystallization mechanism of metallic glass powder and microstructure of bulk alloys fabricated by powder consolidation and crystallization of amorphous phase10.1016/j.jallcom.2013.09.181 ↗
23. Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering10.1016/j.actamat.2017.04.062 ↗
24. Ultrafine grained Ti-based composites with ultrahigh strength and ductility achieved by equiaxing microstructure10.1016/j.matdes.2015.04.032 ↗
25. Equiaxed Ti-based composites with high strength and large plasticity prepared by sintering and crystallizing amorphous powder10.1016/j.msea.2015.10.048 ↗
26. Ultrahigh strength and large plasticity of nanostructured Ti62Nb12.2Fe13.6Co6.4Al5.8 alloy obtained by selectively controlled micrometer-sized phases10.1016/j.matchar.2017.01.009 ↗
27. A review on high-strength titanium alloys: microstructure, strengthening, and properties10.1002/adem.201801359 ↗
28. In situ formed Ti-Cu-Ni-Sn-Ta nanostructure-dendrite composite with large plasticity10.1016/S1359-6454(03)00386-0 ↗
29. Deformation and fracture behavior of composite structured Ti-Nb-Al-Co(-Ni) alloys10.1063/1.4865930 ↗
30. Ti-base bulk nanostructure-dendrite composites: microstructure and deformation10.1016/j.msea.2006.02.236 ↗
31. In situ observations of Widmanstätten ferrite formation in a low-carbon steel10.1016/j.msea.2005.07.015 ↗
32. Production of Ti-13Nb-13Zr alloy for surgical implants by powder metallurgy10.1007/s10853-010-4660-8 ↗
33. The effect of microstructure on tensile properties, deformation mechanisms and fracture models of TG6 high temperature titanium alloy10.1016/j.msea.2010.12.044 ↗
34. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
35. Bimodal eutectic titanium alloys: microstructure evolution, mechanical behavior and strengthening mechanism10.1016/j.msea.2017.05.102 ↗
36. Nucleation and growth mechanism of crystalline phase for fabrication of ultrafine-grained Ti66Nb13Cu8Ni6.8Al6.2 composites by spark plasma sintering and crystallization of amorphous phase10.1016/j.msea.2010.09.037 ↗
37. Near-net forming complex shaped Zr-based bulk metallic glasses by high pressure die casting10.3390/ma11112338 ↗
38. Effects of Fe addition on glass-forming ability and mechanical properties of Ti-Zr-Be bulk metallic glass10.1016/j.jallcom.2012.04.048 ↗
39. Modeling the amorphous forming ability of Ti-based alloys with wide supercooled liquid regions and high hardness10.1016/j.msea.2008.11.011 ↗
40. High tensile ductility of Ti-based amorphous matrix composites modified from conventional Ti–6Al–4V titanium alloy10.1016/j.actamat.2013.01.061 ↗
41. Ultrafine-grained Ti-based composites with high strength and low modulus fabricated by spark plasma sintering10.1016/j.msea.2012.09.047 ↗
42. Deformation-induced nanostructuring in a Ti-Nb-Ta-In β alloy10.1063/1.2222239 ↗
43. Microplasticity and fracture in a Ti-15V-3Cr-3Al-3Sn alloy10.1016/S1359-6462(96)00328-4 ↗
44. High temperature deformation behavior of hot isostatically pressed P/M FGH4096 superalloy10.1016/j.msea.2009.09.011 ↗
45. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
46. A deformation model for anisotropic superplasticity in two phase alloys10.1016/0001-6160(85)90021-5 ↗
47. Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti–6Al–4V alloy10.1016/S0921-5093(98)01157-5 ↗