An experiment-based model of combined hardening and non-hardening embrittlement in an interstitial free steel
Source abstract
Abstract
Abstract The fracture appearance transition temperatures (FATTs) are evaluated for the samples of a Nb-stabilized and P-strengthened interstitial free (IF) steel. Based on the measurements, the combined effect of hardening and phosphorus grain boundary segregation on the embrittlement of the steel is investigated. Both hardening and P boundary segregation can raise the FATT of the steel, causing hardening embrittlement and non-hardening embrittlement, respectively. Meanwhile, the grain size influences both kinds of embrittlement, i.e., there is a synergistic effect between grain size and hardening or P boundary segregation on the FATT of the steel. With the aid of the Taylor expansion along with the experimental data, a combined hardening and non-hardening embrittlement equation is established, being expressed as FATT = 2.1Cp + 3.48σs − 22.36d−1⁄2 + 0.64(Cp − 14)(d−1⁄2 − 3.06) + 0.896(σs − 14)(d−1⁄2 − 3.06) − 13.7, where FATT is the fracture appearance transition temperature in °C, Cp is the phosphorus boundary concentration in at%, σs is the yield strength in 10 MPa, and d is the grain size in mm. A comparison of the calculated and measured FATTs is made, demonstrating that the calculated FATTs are well consistent with the measured ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Mechanical properties of sintered materials. III. Cold brittleness of sintered materials10.1007/BF00793664 ↗
2. Combined hardening and non-hardening embrittlement of an interstitial free steel10.1016/j.matlet.2011.09.055 ↗
3. Relation of ductile-to-brittle transition temperature to phosphorus grain boundary segregation for a Ti-stabilized interstitial free steel10.1016/j.msea.2011.08.002 ↗
4. Influence of boron on phosphorus grain boundary segregation behaviour in high-strength interstitial free steels
5. Effect of solute grain boundary segregation and hardness on the ductile-to-brittle transition for a Cr–Mo low-alloy steel10.1016/j.msea.2004.10.036 ↗
6. Effect of the bainitic and martensitic microstructures on the hardening and embrittlement under neutron irradiation of a reactor pressure vessel steel10.1016/j.jnucmat.2015.05.023 ↗
7. Effects of cold work and phosphorous on the ductile to brittle transition behavior of F82H steels10.1016/j.jnucmat.2011.01.099 ↗
8. Comparison of secondary hardening embrittlement in tungsten and molybdenum steels10.1007/BF02661107 ↗
9. Kinetics and hardening mechanism of the 475 °C embrittlement in 18Cr-2Mo ferritic steels10.1007/BF02641970 ↗
10. Grain size dependence of ductile-to-brittle transition temperature of a high-nitrogen Cr-Mn austenitic steel10.1016/j.msea.2011.10.047 ↗
11. Influence of prior austenite grain size on the degree of temper embrittlement in Cr-Mo steel10.1007/s11665-006-9012-0 ↗
12. Research on influence of phosphorus and grain size on mechanical properties of low carbon steels
13. Effects of neutron-irradiation-induced intergranular phosphorus segregation and hardening on embrittlement in reactor pressure vessel steels10.1016/j.actamat.2008.05.026 ↗
14. The Calculation of transition temperature changes in steels due to temper embrittlement10.1007/BF02654515 ↗
15. Precipitation behavior of FeTiP in Ti-added interstitial free high strength steels10.1016/S1006-706X(16)30107-8 ↗
16. Effect of phosphorus grain boundaries segregation and precipitations on mechanical properties for Ti-IF steel after recrystallization annealing10.1016/S1005-0302(10)60126-0 ↗
17. Impact toughness of ultrafine-grained interstitial-free steel10.1007/s11661-012-1238-x ↗
18. Influence of microalloying elements on recrystallization texture of warm-rolled interstitial free steels10.2320/matertrans.MG200909 ↗
19. Effect of critical temperatures on microstructures and mechanical properties of Nb–Ti stabilized IF steel processed by multiaxial forging10.1016/j.matdes.2016.03.107 ↗
20. Grain refinement by dynamic recrystallization during the simulated warm-rolling of interstitial free steels10.1007/BF02658064 ↗
21. Effect of micro-alloying elements of Ti, Nb and B on recrystallization behavior of cold-rolled interstitial-free steel sheets10.4028/www.scientific.net/MSF.753.207 ↗
22. Effects of composition and processing parameters on precipitation and texture formation in microalloyed interstitial free high strength (IFHS) steels10.1179/174328409X453280 ↗
23. Texture and grain growth characteristics in a boron added interstitial free steel after severe cold rolling and annealing10.1016/j.msea.2009.11.019 ↗
24. Relationship between mechanical and magnetic properties in cold rolled low carbon steel10.1063/1.2401048 ↗
25. The cleavage strength of polycrystals
26. The Deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
27. Effect of grain size on grain boundary segregation10.1016/0925-8388(95)02094-2 ↗
28. Effect of grain size on yttrium grain boundary segregation in fine-grained alumina10.1016/0955-2219(93)90087-8 ↗
29. Grain size strengthening in steel and its relationship to grain boundary segregation of carbon10.1179/mst.1992.8.6.537 ↗
30. Hall-Petch relationship for austenitic stainless steels processed by large strain warm rolling10.1016/j.actamat.2017.06.060 ↗
31. Non-equilibrium phosphorus grain boundary segregation and its effect on embrittlement in a niobium-stabilized interstitial-free steel10.1016/j.matlet.2014.10.158 ↗
32. An Auger electron spectroscopy study of phosphorus and molybdenum grain boundary segregation in a 2.25Cr1Mo steel10.1016/j.matchar.2007.01.003 ↗
33. Non-equilibrium grain boundary segregation of phosphorus under a high applied tensile stress in a 2.25Cr1Mo steel10.1016/j.msea.2007.09.015 ↗
34. Evaluation of the cleavage fracture toughness of RPV steels using small bend specimens10.4028/www.scientific.net/SSP.120.43 ↗
35. The influence of ductile tearing on fracture energy in the ductile-to-brittle transition temperature range10.1016/S0921-5093(01)01913-X ↗
36. Master curve characterization of the fracture toughness in unirradiated and irradiated RPV steels using full and 1/3 size pre-cracked Charpy specimens10.1016/S0308-0161(00)00032-6 ↗
37. Applicability of sub-charpy-size bend and impact specimens for estimation of fracture toughness in the transition region
38. Effect of grain boundary character distribution and grain boundary phosphorus segregation on the brittleness of an interstitial-free steel10.1016/j.matlet.2016.07.023 ↗
39. J.W.J. Morris, The influence of grain size on the mechanical properties of steel, UNT. Digtial library: 〈https://escholarship.org/uc/item/88g8n6f8〉, 2001.10.2172/861397 ↗
40. McLean · 1957
41. Segregation mechanism of phosphorus in Ti-stabilized interstitial-free steel10.1016/j.apsusc.2015.03.079 ↗
42. Dependence of ductile-to-brittle transition temperature on phosphorus grain boundary segregation for a 2.25Cr1Mo steel10.1016/j.msea.2007.09.032 ↗
43. Grain boundary segregation of elements of groups 14 and 15 and its consequences for intergranular cohesion of ferritic iron10.1007/s10853-017-0819-x ↗
44. Lejček · 2010
45. On the thermodynamic description of grain boundary segregation in polycrystals10.1016/0921-5093(94)90933-4 ↗
46. Effect of solute grain boundary segregation and hardness on the ductile-to-brittle transition for a Cr–Mo low-alloy steel10.1016/j.msea.2004.10.036 ↗
47. Synergetic effect of hardness and phosphorus grain-boundary segregation on the ductile-to-brittle transition temperature of 17-4 PH steel10.1007/s11661-003-0008-1 ↗
48. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
49. Sample shape and temperature strongly influence the yield strength of metallic nanopillars10.1016/j.actamat.2008.05.044 ↗
50. Effects of metal composition and temperature on the yield strength of nitrogen strengthened stainless steels10.1016/0921-5093(95)10031-8 ↗
51. Effect of grain size on grain orientations and grain boundary character distribution in recrystallized Al-0.3mass% Mg alloy10.1016/0956-716X(95)00375-6 ↗
52. Fractographic changes caused by phosphorus grain boundary segregation for a low alloy structural steel10.1016/j.msea.2008.07.036 ↗
53. Grain boundary phosphorus segregation in thermally aged low alloy steels10.1080/18811248.2006.9711160 ↗
54. Dependence of grain boundary character distribution on the initial grain size of 304 austenitic stainless steel10.1080/14786435.2017.1288943 ↗
55. Grain boundary character distribution and its effect on corrosion of Ni-23Cr-16Mo superalloy10.1179/1743284715Y.0000000142 ↗
56. Creating and destroying vacancies in solids and nonequilibrium grain boundary segregation10.1360/02ye0285 ↗
57. Diffusion of vacancy-solute complexes in alloys10.1179/174328405X27025 ↗