Evolution mechanism of dislocation boundary and characteristic micro-structure of commercial pure titanium during the projectile impact
Source abstract
Abstract
Abstract Dislocation boundary response and characteristic micro-structure were investigated in commercial pure titanium during the penetration impact and dynamic compression. The initial dislocation boundary induced by cold rolling can strengthen the adiabatic shearing sensitivity of commercial pure titanium during the penetration impact, which is consistent with the mechanical response and micro-structure during the dynamic compression. The compression with a loading direction vertical to the initial geometrically necessary boundaries (GNBs) results in the decrease in the spacing between GNBs, while the compression with a loading direction parallel to the initial GNBs attributes to the generation of new dislocation boundary crossed with the initial one. Then, a model of distribution and morphology of dislocation boundary around crater is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
2. Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti–6Al–4V targets10.1016/j.msea.2009.03.051 ↗
3. Dynamic mechanical behavior of pure titanium10.1016/j.jmatprotec.2004.04.327 ↗
4. Shear localization in dynamic deformation: microstructural evolution10.1007/s11661-007-9431-z ↗
5. Characteristic microstructure and microstructure evolution in Al–Cu–Mn alloy under projectile impact10.1016/j.msea.2011.09.109 ↗
6. Deformation behaviour of commercially pure titanium at extreme strain rates10.1016/j.actamat.2011.02.018 ↗
7. Study on deformation and failure of TA2 under compressive load at high strain rate
8. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum10.1016/S0921-5093(96)10847-9 ↗
9. A finite element model of high speed metal cutting with adiabatic shearing10.1016/S0045-7949(02)00023-8 ↗
10. Influence of the material constitutive models on the adiabatic shear band spacing: mts, power law and Johnson–Cook models10.1016/j.ijsolstr.2004.01.008 ↗
11. Adiabatic shear localization in α-titanium: experiments, modeling and microstructural evolution10.1016/j.jmps.2004.02.013 ↗
12. Effect of grain boundaries and grain orientation on structure and properties10.1007/s11661-010-0292-5 ↗
13. Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations10.1016/S1359-6462(02)00358-5 ↗
14. Microstructural evolution of IF-steel during cold rolling10.1016/j.actamat.2003.10.040 ↗
15. Effect of grain orientation on deformations tructure in cold-rolled polycrystalline aluminium10.1016/S1359-6454(98)00229-8 ↗
16. Study on deformation and failure of TA2 under compressive load at high strain rate
17. Influence mechanism of the initial dislocation boundary on the adiabatic shear sensitivity of commercial pure titanium10.1016/j.msea.2016.08.089 ↗
18. Stored energy, microstructure, and flow stress of deformed metals10.1007/s11661-005-0109-0 ↗
19. Effects of strain rates on deformation twinning behavior in α-titanium10.1016/j.matchar.2015.05.016 ↗