journal article·2017-06

The enhanced thermal and mechanical properties of graphite foams with a higher crystallinity and apparent density

Ji-Hyun Kim, Hyung-Ik Lee, Young-Seak Lee

Publisher page

Abstract

Abstract Graphite powder, which has a highly graphitic structure, is used as filler material in the preparation of graphite foams (GFms) and enhances the foams’ thermal–mechanical properties. GFms are prepared using the hydrogel template method with mesophase pitch, polyvinyl alcohol-acrylic acid (PVA-AAc) solution and graphite powder. GFms containing 0.3 w/w% added graphite exhibit as much as an 11.18% increase in crystalline thickness (Lc) compared to that of the sample without graphite powder. These increased crystalline thicknesses of GFms result in thermal conductivity increases as high as 59.30%. Furthermore, the compressive strength is increased by as much as 120.52% compared to that of the sample without graphite powder, and the apparent density is increased by as much as 4.05%. The average pore size of the GFms is controlled by the amount of graphite powder, which affects the GFms’ cell growth mechanism. These results revealed that the thermal–mechanical properties of GFms containing graphite powder with a highly graphitic structure were strongly affected by the GFms’ crystalline thickness and apparent density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Thermal properties of materials · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. A technique for enhancing boiling heat transfer with application to cooling of electronic equipment10.1109/33.180048 ↗
2. High-speed visualization of boiling from an enhanced structure10.1016/S0017-9310(02)00196-5 ↗
3. Fluorination of single-walled carbon nanotube: the effects of fluorine on structural and electrical properties10.1016/j.jiec.2016.03.024 ↗
4. Carbon foams as catalyst supports for phenol photodegradation10.1016/j.jhazmat.2010.08.118 ↗
5. A self-tempate synthesis of hierarchical porous carbon foams based on banana peel for supercapacitor electrodes10.1016/j.jpowsour.2012.02.089 ↗
6. A heat transfer model for incorporating carbon foam fabrics in firefighter's garment10.1007/s00231-013-1259-z ↗
7. Broadband electromagnetic characterization of carbon foam to metal contact10.1016/j.carbon.2013.10.074 ↗
8. Multifunctional polymer foams with carbon nanoparticles10.1016/j.progpolymsci.2013.11.002 ↗
9. Preparation and characterization of graphite foams10.1016/j.jiec.2015.09.003 ↗
10. Carbon foams for thermal management10.1016/S0008-6223(03)00091-5 ↗
11. Preparation and characterization of carbon foam cyanate ester mixtures10.1007/s10973-015-4730-x ↗
12. Preparation and properties of graphene nanosheets/carbon foam composites10.1016/j.jaap.2015.11.003 ↗
13. Characteristics of a high compressive strength graphite foam prepared from pitches using a PVA–AAc solution10.1016/j.jiec.2015.05.013 ↗
14. A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites10.1016/j.jiec.2014.03.022 ↗
15. A graphite foam reinforced by graphite particles10.1016/j.carbon.2007.08.019 ↗
16. Graphite foam from pitch and expandable graphite10.1016/j.carbon.2014.02.035 ↗
17. Thermal conductivity improvement of composite carbon foams based on tannin-based disordered carbon matrix and graphite fillers10.1016/j.matdes.2015.06.057 ↗
18. Rheological behaviors of mesophase pitches prepared from coal tar pitch as carbon fiber precursor
19. Fabrication and characteristics of mesophase pitch-based graphite foams prepared using PVA-AAc solution10.14478/ace.2015.1102 ↗
20. Carbon foams from coals. A preliminary study10.1016/j.fuel.2005.06.008 ↗
21. High-thermal-conductivity, mesophase-pitch-derived carbon foams: effect of precursor on structure and properties10.1016/S0008-6223(99)00190-6 ↗
22. Insights into the chemical nature and formation mechanisms of discharge products in Na-O2 batteries by means of operando X-ray diffraction10.1021/acs.jpcc.6b00903 ↗
23. Parameter analysis of a practical lithium- and sodium-air electrical vehicle battery10.1016/j.jpowsour.2010.09.104 ↗