The effects of high temperature and fiber diameter on the quasi static compressive behavior of metal fiber sintered sheets
Source abstract
Abstract
Abstract The compressive mechanical properties of the sintered sheets of continuous stainless steel fibers with different fiber diameters (8 µm, 12 µm, 28 µm) are investigated at temperatures from 298 K to 1073 K. The stress-strain curves of metal fiber sintered sheet (MFSS) are obtained by testing under uniaxial compression and 0.2% offset yield stress are determined. Inner micro-structures of the material are revealed by using scanning electron microscope (SEM) and microscopic computer tomography. The results indicates that fabrication technique and porosity are two principle factors affecting the yield strength of MFSS and the strength of MFSS is insensitive to the temperature below 873 K while softening occurs at temperature 1073 K. At relative high porosity (e.g. 77%), the material with small diameter fibers tends to have higher yield strength while at low porosity, MFSS's yield strength becomes high with the increase of the fiber diameter, which is probably attributed to the joint size, the surface appearance of fibers and prehardening generated during the manufacturing of MFSS. A simplified structure model taking joint size into consideration is established to explain the influence of the joint size on the yield strength of MFSS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Cellular and Composite Structures · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Calculation of sound absorption characteristics of porous sintered fiber metal10.1016/j.apacoust.2008.03.004 ↗
2. Structured combustion catalysts based on sintered metal fiber filters10.1016/S0926-3373(02)00304-1 ↗
3. Nuclear power generation: improving HEPA filter trains through effective pre-filtration
4. High temperature filtration in the process industry
5. Sintering of fiber metal materials
6. The mechanical behavior of porous austenitic stainless steel fibre structures10.1007/BF02402752 ↗
7. Mechanics of thin ultra-light stainless steel sandwich sheet material Part I. stiffness10.1016/S1359-6454(02)00528-1 ↗
8. A simple fracture energy prediction method for fiber network based on its morphological features extracted by X-ray tomography10.1016/j.msea.2013.07.052 ↗
9. Experimental investigation on uniaxial tensile properties of high-porosity metal fiber sintered sheet10.1016/j.msea.2009.06.025 ↗
10. Compressive properties of porous metal fiber sintered sheet produced by solid-state sintering process10.1016/j.matdes.2011.09.026 ↗
11. Characterization of three- and four-point bending properties of porous metal fiber sintered sheet10.1016/j.matdes.2013.10.077 ↗
12. Characterization of electrical conductivity of porous metal fiber sintered sheet using four-point probe method10.1016/j.matdes.2011.12.046 ↗
13. Out-of-plane auxeticity in sintered fibre network mats10.1016/j.scriptamat.2015.04.028 ↗
14. The effects of micro-defects and crack on the mechanical properties of metal fiber sintered sheets10.1016/j.ijsolstr.2014.02.004 ↗
15. The shear properties and deformation mechanisms of porous metal fiber sintered sheets10.1016/j.mechmat.2013.11.007 ↗
16. Elastoplastic properties of transversely isotropic sintered metal fiber sheets10.1016/j.msea.2016.03.085 ↗
17. On the mechanical properties of sintered metallic fibre structures10.1016/j.msea.2012.11.034 ↗
18. Experimental and numerical evaluation of the mechanical behavior of strongly anisotropic light-weight metallic fiber structures under static and dynamic compressive loading10.3390/ma9050398 ↗
19. Ferrous fibre network materials for jet noise reduction in aeroengines Part II: thermo-mechanical stability
20. Gibson · 1997
21. Failure surfaces for cellular materials under multiaxial loads–I. modeling10.1016/S0020-7403(89)80001-3 ↗
22. Sintering diagram for 316L stainless steel fibers10.1016/j.powtec.2015.10.052 ↗