Phase transformation under thermal fatigue of high Mn-TWIP steel: Microstructure and mechanical properties
Source abstract
Abstract
High Mn steels present both high tensile strength and good ductility, therefore they have attracted attention as promising candidates for the next-generation of automotive steels. However, slight changes during the manufacturing process or in service conditions (i.e. chemical composition, annealing temperature, among others) can promote significant variations in their microstructure, leading to a strong modification in their mechanical response. In this regard, this paper discusses the relationship between the different microstructures generated on a high Mn-twinning induced plasticity (TWIP) steel and its mechanical properties evaluated by means of Vickers’s hardness, tensile testing and also high cycle fatigue response. Different conditions, namely: as received, annealed at 500 °C and thermally cycled at 500 °C during 15, 36, 56 and 75 cycles, have been analyzed. The results exhibit the development of a heterogeneous pearlitic microstructure with a plateau on its fraction content and Vickers’s hardness at ~24% and 292±5 HV, respectively, after 36 thermal fatigue cycles. Finally, pearlite colonies have been nucleated during the thermal fatigue treatment along the austenitic grain boundary producing a deleterious effect on the tensile and high cycle fatigue behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Bracke · Acta Mater. · 2009 · 57 · 151210.1016/j.actamat.2008.11.036 ↗
2. Frommeyer · ISIJ Int. · 2003 · 43 · 43810.2355/isijinternational.43.438 ↗
3. Grässel · Int. J. Plast. · 2000 · 16 · 139110.1016/S0749-6419(00)00015-2 ↗
4. Barbier · Mater. Sci. Eng. A · 2009 · 500 · 19610.1016/j.msea.2008.09.031 ↗
5. Curtze · Acta Mater. · 2010 · 58 · 512910.1016/j.actamat.2010.05.049 ↗
6. De Cooman · J. Mater. Sci. Technol. · 2012 · 28 · 51310.1179/1743284711Y.0000000095 ↗
7. Saced-Akbari · Metall. Mater. Trans. A · 1688 · 2012 · 43
8. Saced-Akbari · Scr. Mater. · 2012 · 66 · 102410.1016/j.scriptamat.2011.12.041 ↗
9. Kruger · J. Phys. IV · 2003 · 110 · 189
10. Allain · Mater. Sci. Eng. A · 2004 · 387–389 · 15810.1016/j.msea.2004.01.059 ↗
11. Oh · Mater. Sci. Eng. A · 1995 · 197 · 14710.1016/0921-5093(94)09751-8 ↗
12. Vercammen · Acta Mater. · 2005 · 2004 · 52
13. Ding · J. Iron Steel Res. Int. · 2006 · 13 · 6610.1016/S1006-706X(06)60113-1 ↗
14. Allain · Mater. Sci. Eng. A · 2004 · 387–389 · 27210.1016/j.msea.2004.05.038 ↗
15. Jin · Acta Mater. · 1680 · 2012 · 60
16. Dini · Mater. Des. · 2010 · 31 · 339510.1016/j.matdes.2010.01.049 ↗
17. Dobrzanski · Arch. Mater. Sci. Eng. · 2009 · 2 · 69
18. Song · Mater. Sci. Eng. A · 2014 · 610 · 14510.1016/j.msea.2014.05.033 ↗
19. Zhao · Mater. Sci. Eng. A · 2014 · 608 · 10610.1016/j.msea.2014.04.084 ↗
20. Hua · J. Iron Steel Res. Int. · 2006 · 13 · 6610.1016/S1006-706X(06)60113-1 ↗
21. Dobrzanski · J. Achiev. Mater. Manuf. Eng. · 2012 · 55 · 230
22. Wu · J. Iron Steel Res. Int. · 2014 · 21 · 35210.1016/S1006-706X(14)60054-6 ↗
23. Guo · Mater. Sci. Eng. A · 2013 · 584 · 13310.1016/j.msea.2013.07.020 ↗
24. Kim · Mater. Sci. Eng. A · 2011 · 528 · 469610.1016/j.msea.2011.02.068 ↗
25. Hamada · Mater. Sci. Eng. A · 2009 · 517 · 6810.1016/j.msea.2009.03.039 ↗
26. Hamada · Mater. Sci. Eng. A · 2010 · 527 · 571510.1016/j.msea.2010.05.035 ↗
27. W. D. Callister, Introducción a la ciencia e ingeniería de los materiales. Reverte, 2002, vol. 1. ISBN : 8429172521.
28. Xiao · Acta Mater. · 2006 · 54 · 126510.1016/j.actamat.2005.10.055 ↗
29. van Tol · Acta Mater. · 2014 · 64 · 3310.1016/j.actamat.2013.10.037 ↗
30. FSstel database, in: 〈www.factsage.com〉 (visited 08/09/2016).
31. Bale · Calphad · 2009 · 33 · 29510.1016/j.calphad.2008.09.009 ↗
32. ASTM E8-04: Standard Test Methods for Tension Testing of Metallic Material, 2008.
33. Mateo · Mater. Test. · 2015 · 57 · 13610.3139/120.110686 ↗
34. ASTM E466-96. Standard Practice for Conducting force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials, 2002.
35. Collins · 1981 · 369
36. Raabe · MRS Bull. · 2010 · 35 · 98210.1557/mrs2010.703 ↗
37. Li · Acta Mater. · 2011 · 59 · 396510.1016/j.actamat.2011.03.022 ↗
38. Chen · ISIJ Int. · 1804 · 2007 · 47
39. Shickhelsouk · Int. J. Plast. · 2009 · 25 · 10510.1016/j.ijplas.2007.11.004 ↗
40. Dastur · Metall. Trans. A · 1981 · 12A · 74910.1007/BF02648339 ↗
41. Cuddy · Acta Metall. · 1972 · 20 · 115710.1016/0001-6160(72)90164-2 ↗
42. Adler · Metall. Mater. Trans. A · 1986 · 17A · 172510.1007/BF02817271 ↗
43. De Almeida · Mater. Charact. · 1998 · 41 · 13710.1016/S1044-5803(98)00031-X ↗
44. Roa · Mater. Sci. Eng. A · 2015 · 628 · 41010.1016/j.msea.2015.01.043 ↗