journal article·2016-09

Tensile properties and microstructures of multilayer PtTiZr/Ti laminate composites prepared by hot pressing and rolling

Ye Fan, Siyong Xu, Jinxin Guo, Guoyi Qin

Publisher page

Abstract

Abstract The development of platinum/titanium bi-metal laminated composites is useful for improving the mechanical characteristics of platinum and for reducing platinum consumption. A multi-layered Pt0.5Ti0.2Zr/Ti laminate composite was prepared by hot pressing and rolling using foils of Pt0.5Ti0.2Zr micro-alloy and Ti. The effect of the pressing and rolling temperatures on the tensile properties and microstructures of the composite was studied. The results showed that the compaction temperature of the composite stack should not be very high, because at high temperatures, metal compounds are formed at the layer interfaces, which adversely affect the mechanical properties and structure of the composite. It was also observed that the micro-alloying method effectively improves the layer continuity and the straightness and uniformity of the laminated structures. The composites manufactured by hot pressing and large deformation rolling at 500 °C exhibit excellent tensile properties and a good microstructure. The mechanical performance of the composites is significantly improved with respect to that of pure platinum.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Platinum group metals (PGMs) for permanent implantable electronic devices
2. Ning · 2010
3. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
4. Evolution of structure and fabrication of Cu/Fe multilayered composites by a repeated diffusion-rolling procedure10.1016/j.matdes.2015.07.082 ↗
5. Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process10.1016/j.compscitech.2008.02.029 ↗
6. Evolution of microstructure for multilayered Al/Ni composites by accumulative roll bonding process10.1016/j.matlet.2006.03.001 ↗
7. Strength of nano-thickness multi-layered Fe-Cu composites produced by repeated pressing and rolling10.1016/S1359-6462(01)00730-8 ↗
8. Microstructures and strength of nanoscale Cu–Ag multilayers10.1016/S1359-6462(02)00036-2 ↗
9. Processing and microstructural characterisation of laminated Ti-intermetallic composites synthesised using Ti and Cu foils10.1016/j.matlet.2007.12.067 ↗
10. Micro-structural evaluation of Cu/Nb nano-layered composites produced by repeated press and rolling process10.1016/j.jallcom.2009.04.067 ↗
11. Formation of nanoscale Fe/Ag multilayer by repeated press-rolling and its layer thickness dependence of magnetoresistance10.1016/S0921-5093(00)00680-8 ↗
12. Effect of annealing on the strength of Ag/Fe and Ag/Ni super-laminates produced by foil metallurgy10.1016/j.msea.2004.02.096 ↗
13. Deformation-induced synthesis and structural transformations of metallic multilayers10.1016/j.scriptamat.2003.11.047 ↗
14. Hard magnetic Fe–Pt alloys prepared by cold-deformation10.1016/S0304-8853(03)00062-3 ↗
15. Revised phase diagram for the Pt–Ti system from 30 to 60at% platinum10.1016/j.jallcom.2003.12.001 ↗
16. Hardening behavior of Pt-Ti micro alloys10.1016/j.jallcom.2015.04.152 ↗
17. Control of layer continuity in metallic multilayers produced by deformation synthesis method10.1016/j.msea.2005.06.030 ↗