Static recrystallisation of steels produced by direct strip casting – The effect of carbon and vanadium concentration
Source abstract
Abstract
Abstract Six steel alloys containing a range of carbon and vanadium concentrations have been prepared by simulated strip casting. The alloys were cold rolled and annealed to examine the recrystallisation behaviour. The annealing treatment resulted in three processes occurring concurrently: recrystallisation; spheroidisation of cementite, and precipitation of vanadium-enriched nano-precipitates. These nano-precipitates had a much higher concentration of Fe than would be expected from traditional processing methods, and this increased their maximum attainable volume fraction. In the two alloys that did not contain second phase particles, recrystallisation showed typical reaction kinetics, and the recrystallised grain size continued to increase with increasing time at temperature. However, in those alloys with second phase particles the recrystallised grains showed unusual behaviour, rapidly reaching an upper limit to their size. Continued time at temperature was not accompanied by an increase in the grain size. This growth limit has been attributed to Zener pinning, with the limiting grain size being proportional to the Zener pinning pressure. It has been proposed that the delayed recrystallisation that is typically observed in strip cast steels is likely to be the result of nano-scale precipitation which is unique to rapidly cooled materials, such as those produced by strip casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Ferry · 2006
2. Direct casting of thin strip steel10.1016/0160-9327(92)90068-Z ↗
3. Static recrystallization of strip cast alloys in the presence of complex nano-sulfide and nitride precipitates10.1016/j.msea.2013.05.070 ↗
4. Correlation of tensile test properties with those predicted by the shear punch test
5. Comparison of recrystallization behaviour of cold deformed acicular ferrite produced by conventional processing and direct strip casting10.1016/j.jmatprotec.2007.10.069 ↗
6. Effect of cooling rate on phase transformations in a high-strength low-alloy steel studied from the liquid phase10.1007/s11661-015-3173-0 ↗
7. Effect of Nb microalloying and hot rolling on microstructure and properties of ultrathin cast strip steels produced by the castrip® process10.1007/s11661-011-0622-2 ↗
8. Experimental studies of interfacial heat transfer and initial solidification pertinent to strip casting10.2355/isijinternational.38.959 ↗
9. An X-ray method for the determination of stored energies in texture components of deformed metals; application to cold worked ultra high purity iron10.1016/S1359-6454(99)00457-7 ↗
10. The microstructures of strip-cast low-carbon steels and their response to thermal processing10.1007/BF02647400 ↗
11. Deformation microstructures and textures in steels10.1098/rsta.1999.0385 ↗
12. Five decades of the Zener equation10.2355/isijinternational.38.913 ↗
13. Lejček · 2010
14. Effect of rare-earth additions on the texture of wrought magnesium alloys: the role of grain boundary segregation10.1007/s11661-013-1950-1 ↗
15. Greenwood · 1984
16. Gale · 2003
17. The role of vanadium in microalloyed steels
18. Quantitative examination of carbide and sulphide precipitates in chemically complex steels processed by direct strip casting10.1016/j.matchar.2015.12.028 ↗