Anisotropic behavior studies of aluminum alloy 5083-H0 using a micro-tensile test stage in a FEG-SEM
Source abstract
Abstract
Abstract The plastic anisotropic characteristics of aluminum alloy 5083-H0 at varying strain rates were investigated using uniaxial tensile testing inside an ultra-high resolution FEG-SEM. The stress strain graphs obtained show that for the rolling direction the mechanical properties decrease with increased strain rate from 0.1 to 0.5 mm/min. The transverse direction mechanical properties increase from 0.1 to 0.2 and decrease at 0.5 mm/min. Serrated yielding for both directions was more pronounced in the 0.1 mm/min and 0.2 mm/min than in 0.5 mm/min strain rate. The fracture surface was characterized by nucleation of micro-dimples of varying sizes and shapes, which became shallower with increasing strain rates. Intermetallic particles were observed in the large micro-dimples on the fractured surface. The microstructure anisotropy revealed a shear type failure mode due to the shear bands localization for the 0° direction and for the 90° direction, failure mode showed both intergranular and shear type failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Tucker · Mech. Mater. · 2010 · 42 · 89510.1016/j.mechmat.2010.07.003 ↗
2. Snyman · Eng. Struct. · 2010 · 32 · 88610.1016/j.engstruct.2009.12.014 ↗
3. Motsi · Adv. Mat. Res. · 2014 · 1019 · 103
4. Zhou · Proc. Inst. Mech. Eng. C. J. Mech. Eng. Sci. · 2013 · 227 · 88310.1177/0954406212450962 ↗
5. Børvik · Int. J. Impact Eng. · 2009 · 36 · 42610.1016/j.ijimpeng.2008.02.004 ↗
6. Whelchel · Scr. Mater. · 2014 · 92 · 5910.1016/j.scriptamat.2014.08.014 ↗
7. Pérez-Bergquist · Mater. Sci. Eng., A · 2011 · 528 · 873310.1016/j.msea.2011.08.046 ↗
8. Madhu · Defence. Sci. J. · 2011 · 61 · 39410.14429/dsj.61.365 ↗
9. T. Masuda, T. Kobayashi, H. Toda, ICF10, Honolulu (USA) 2001, 2013.
10. Benallal · Technol. Mech. · 2003 · 23 · 160
11. Clausen · Mater. Sci. Eng., A · 2004 · 364 · 26010.1016/j.msea.2003.08.027 ↗
12. J. Kang, D. Wilkinson, A. Beaudoin, J. Embury, R.K. Mishra, ICF12, Ottawa 2009, (2013).
13. Zhang · Int. J. Numer. Method Eng. · 2011 · 86 · 7010.1002/nme.3047 ↗
14. Huskins · Mater. Sci. Eng., A · 2010 · 527 · 129210.1016/j.msea.2009.11.056 ↗
15. Benallal · Int. J. Plast. · 2008 · 24 · 191610.1016/j.ijplas.2008.03.008 ↗
16. Ma · TELKOMNIKA Indones. J. Electr. Eng. · 2012 · 10 · 524
17. Besterci · Est. J. Eng. · 2009 · 15 · 24710.3176/eng.2009.4.01 ↗
18. Podor · InTech · 2012
19. Kabirian · Int. J. Plast. · 2014 · 55 · 23210.1016/j.ijplas.2013.11.001 ↗
20. Chihab · Ann. Chim. Sci. Mater. · 2002 · 27 · 6910.1016/S0151-9107(02)85008-5 ↗
21. Rusinek · Mater. Des. · 2009 · 30 · 437710.1016/j.matdes.2009.04.011 ↗
22. Darras · Mater. Sci. Eng., A · 2013 · 568 · 14310.1016/j.msea.2013.01.039 ↗
23. Callister · 2007