Thermomechanical characterization of 22MnB5 steels with special emphasis on stress relaxation and creep behavior
Source abstract
Abstract
Abstract In hot stamping, the deformed austenitic phase is further quenched in the die to produce a fully martensitic microstructure in the component. During this time, the microstructure is refined with a relaxed state of stress. Therefore, it is important to study the time-dependent effects on the material during forming and quenching. This influences the martensite start temperature and further aids to predict the residual stress in the component accurately. In this work, thermo-mechanical characterization of 22MnB5 steels is presented with special emphasis on stress relaxation and creep phenomena. In addition to the monotonous experiments at different strain rates, relaxation and creep tests give a deeper insight into the rate dependent behavior of the material. These tests are conducted for two distinct microstructures (austenite and martensite) using Gleeble 3150. In austenitic phase, relaxation test is conducted at 900 °C for different strain levels which lead to a significant drop in the stress level of the material due to recovery. Therefore, creep tests are conducted to determine the real elastic limit of the material at high temperatures. As a result, a significant increase in the creep strain is realized once the stress in the material increases 20 MPa. Martensitic microstructure shows stress relaxation behavior at 200 °C (below the martensite finish (M f ) temperature) and even at ambient temperature after a total deformation of 3%. These experimental results are the basis for the construction of a viscoplastic constitutive model and the model is able to represent the observed phenomena.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
2. Press hardening—an innovative and challenging technology10.1016/j.acme.2012.04.013 ↗
3. Components with optimised properties due to advanced Thermo-mechanical process strategies in hot sheet metal forming10.1002/srin.200806322 ↗
4. Hot forming of boron steels using heated and cooled tooling for tailored properties10.1016/j.jmatprotec.2012.06.028 ↗
5. Bardelcik · 2012
6. Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties10.1016/j.jmatprotec.2013.12.015 ↗
7. The effects of non-isothermal deformation on martensitic transformation in 22MnB5 steel10.1016/j.msea.2007.10.057 ↗
8. Effect of non-isothermal deformation of austenite on phase transformation and microstructure of 22SiMn2TiB steel10.1016/j.msea.2011.12.088 ↗
9. Material parameter estimation for boron steel from simultaneous cooling and compression experiments10.1088/0965-0393/13/8/007 ↗
10. Constitutive relationships for 22MnB5 boron steel deformed isothermally at High temperatures10.1016/j.msea.2007.05.094 ↗
11. Hochholdinger · 2012
12. Investigation of the thermo-mechanical properties of hot stamping steels10.1016/j.jmatprotec.2006.03.233 ↗
13. Effect of thermo-mechanical process on the microstructure and secondary-deformation behavior of 22MnB5 steels10.1016/j.jmatprotec.2012.12.012 ↗
14. The effect of strain rate and deformation temperature on the characteristics of isothermally hot compressed boron-alloyed steel10.1016/j.msea.2012.01.060 ↗
15. Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson–Cook model10.1016/j.msea.2013.05.023 ↗
16. On the ferrite and bainite transformation in isothermally deformed 22MnB5 steels10.1016/j.msea.2012.04.091 ↗
17. Numerical implementation of a constitutive model for simulation of hot stamping10.1088/0965-0393/15/2/007 ↗
18. Characterisation of the flow properties of the Quenchenable ultra High strength steel 22MnB510.1016/S0007-8506(07)60404-1 ↗
19. Åkerström · 2006
20. Fundamental problems in viscoplasticity10.1016/S0065-2156(08)70009-7 ↗
21. Dislocation theory based constitutive modelling: foundations and applications10.1016/S0924-0136(98)00208-8 ↗
22. The relationship between stress and strain for homogeneous deformations
23. Zang · 2010
24. Investigation on dynamic recovery behavior of boron steel 22MnB5 under austenite state at elevated temperatures10.4271/2011-01-1057 ↗