journal article·2007-05

Influence of diamond pressing process on corrosion resistance in steel

Aiman Eid Al-Rawajfeh, Ubeidulla Al-Qawabeha

Materials Science and Engineering: A· Volume 456· Issue 1-2
Publisher page

Abstract

Abstract Diamond pressing (DP) is a finishing treatment method that is used to create necessary parts with certain roughness. It is used to impart certain physical and mechanical properties, such as appearance, corrosion, friction, wear and fatigue resistance. In this work, the influence of diamond pressing process (DPP) on corrosion resistance in A53 steel was studied in HCl solution. Microhardness (MH), microstructure, weight loss and potentiostatic polarization were investigated at pressing forces of 40, 60, 80 and 100 N. Microhardness increases with increasing the applied force to a certain limit (i.e. ∼90 N). The percentage improvements were found to be 30, 17, 13, and −9% for 40, 60, 80 and 100 N pressing forces, respectively. Weight losses decrease with increasing the pressing forces up to 90 N. Corrosion potential and corrosion current decrease with increasing the pressing force reaching a minimum at about 90 N and then begin to increase with increasing the pressing force. Occasionally, high forces caused failure in the microstructure when the prising force exceeded 90 N. Percentage protection against corrosion shows a supporting behaviour.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Schey · 2000
2. Kalpakjian · 1995
3. B.M. Torbello, Diamond Pressing, Machine Production, Moscow, 1998.
4. Odentsove · 1991
5. Al-Qawabeha · 2002 · 341
6. Mehra · Bull. Mater. Sci. · 2002 · 25 · 5310.1007/BF02704595 ↗
7. Al-Rawajfeh · Desalination · 2007 · 206 · 16910.1016/j.desal.2006.02.065 ↗
8. A. Nazmy, H. Rydstad, US Patent No. 4,909,859 (1990).
9. C.E.D. Chidsey, H.H. Law, US Patent No. 5,178,916 (1993).
10. Parsapour · 2005 · 91
11. Al-Tal · 2005 · 138
12. Kafiah · 2005 · 216
13. Fontana · 1987
14. Giggins · Trans. TMS-AIME · 1969 · 245 · 2509
15. Arzt · 1984 · 367