journal article·2004-06

A fluxless fabrication process producing Sn-rich Bi–Sn joints with high melting temperature

Chin C. Lee, Ricky W. Chuang, Dong W. Kim

Materials Science and Engineering: A· Volume 374· Issue 1-2
Publisher page

Abstract

Abstract A fluxless bonding process to produce tin-rich bismuth–tin solder joints is presented. The process was designed using Sn–Bi multilayer structure deposited in high vacuum to inhibit oxidation and to achieve the fluxless feature. The composition was chosen to be tin-rich, 95.0 wt.% Sn and 5.0 wt.% Bi, to achieve a solidus temperature significantly higher the 139 °C eutectic temperature of the 57Bi–43Sn eutectuic alloy. The resulting joints were imaged with a scanning acoustic microscope (SAM) and shown to be nearly void-free. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy were used to study the microstructure and compositions of the joints. The measured joint thickness was 4.1 μm. SAM and EDX results indicate that the solder joint consists of (β-Sn) matrix embedded with small grains of (Bi) solid solution phase. The melting temperature of the joint was measured to be 210–215 °C, as expected from the designed composition. The fluxless feature of this process gives the packaging community another process to consider for use in devices and packages where the use of flux is prohibited, such as some biomedical, MEMs, fiber optical and photonic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Strain-life behavior in 60/40 solder10.1115/1.3226525 ↗
2. Constitutive relation and creep-fatigue life model for eutectic tin–lead solder10.1109/33.56179 ↗
3. Superplastic creep of eutectic tin–lead solder joints10.1007/BF02673342 ↗
4. J. Cannis, Green IC Packaging, Advanced Packaging, August 2001, p. 33.
5. S.K. Kang, Recent progress in Pb-free solders and soldering technologies, J. Miner., Met., Mater. (June) (2001) 16–21.10.1007/s11837-001-0096-6 ↗
6. D.R. Frear, J.W. Jang, J.K. Lin, C. Zhang, Pb-free solders for flip–chip interconnects, J. Miner., Met., Mater. (2001) 28–32.10.1007/s11837-001-0099-3 ↗
7. G. Whitten, Lead-free solder implementation for automotive electronics, in: Proceedings of the IEEE Electronic Components and Technology Conference, Las Vegas, NV, 21–24 May 2000, pp. 1410–1415.10.1109/ECTC.2000.853394 ↗
8. K.Y. Lee, M. Li, D.R. Olsen, W.T. Chen, B.T.C. Tan, S. Mhaisalkar, Mictostructure, joint strength and failure mechanism of Sn–Ag, Sn–Ag–Cu versus Sn–Pb–Ag solders in BGA packages, in: Proceedings of the IEEE Electronic Components and Technology Conference, Orlando, FL, 29 May–1 June 2001, pp. 468–485.
9. Y.D. Jeon, S. Nieland, A. Ostman, H. Reichl, K.Y. Paik, Studies on interfacial reactions between electroless Ni UBM and 95.5Sn–4.0Ag–0.5Cu alloy, in: Proceedings of the IEEE Electronic Components and Technology Conference, San Diego, CA, 28–31 May 2002, pp. 740–746.10.1109/ECTC.2002.1008180 ↗
10. F. Hua, Z. Mei, J. Glazer, Eutectic Sn–Bi as an alternative to Pb-free solders, in: Proceedings of the IEEE Electronic Components and Technology Conference, Seattle, WA, 25–28 May 1998, pp. 277–283.10.1109/ECTC.1998.678706 ↗
11. S. Choe, R.W. Chuang, C.C. Lee, Fluxless Sn/Bi/Au bonding process using multilayer design, in: Proceedings of the IEEE Electronic Components and Technology Conference, Lake Buena Vista, FL, 29 May–1 June 2001, pp. 486–488.10.1109/ECTC.2001.927771 ↗
12. A new bonding technology using gold and tin multilayer composite structures10.1109/33.87322 ↗
13. K. Kulojarvi, S. Pienimaa, J.K. Kivilahti, High volume capable direct chip attachment method, in: Proceedings of the IEEE Electronic Components and Technology Conference, San Diego, CA, 1–4 June 1999, pp. 441–445.10.1109/ECTC.1999.776212 ↗
14. H. Okamoto, T.B. Massalski (Eds.), Binary Alloy Phase Diagrams, vol. 1, ASM International, Metals Park, OH, 1990, p. 796.
15. C.C. Lee, C.S. Tsai, X. Cheng, Complete characterization of thin and thick-film materials using wideband reflection acoustic microscopy, IEEE Trans. Son. Ultrason. SU-32 (March) (1985) 248–258.10.1109/T-SU.1985.31591 ↗