journal article·2008-12

Mechanical properties and deformation behaviour of a niobium alloy with different carbon contents

Rengen Ding, Ian P. Jones

Materials Science and Engineering: A· Volume 497· Issue 1-2
Publisher page

Abstract

Abstract The mechanical behaviour of Nb 35 Ti 6 Al 5 Cr 8 V (at.%) containing different C contents (0, 1, 10 at.%) has been investigated. Both conventional constant strain rate deformation and compressive creep tests have been performed and the deformation microstructures have been examined using transmission electron microscopy (TEM). At room temperature all three alloys deform primarily by slip, with some mechanical twinning. Deformation at higher temperatures occurs by a combination of dislocation glide and climb processes, giving more homogeneous microstructures. Most of the dislocations in the matrix of these alloys have Burgers vector b = 1/2 although some short segments with b = were also observed where two dislocations with b = 1/2 interact during high-temperature deformation. Deformation of carbide at high temperatures occurs primarily by {1 1 1} slip. The presence of extensive carbides resulted in a substantial increase in yield strength at room and high temperatures and improved creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Shah · Mater. Sci. Eng. A · 1995 · 192/193 · 65810.1016/0921-5093(95)03318-1 ↗
2. Tanaka · Mater. High Temp. · 2000 · 17 · 45710.1179/mht.2000.060 ↗
3. Tan · J. Jpn. Inst. Metals · 2000 · 64 · 55910.2320/jinstmet1952.64.7_559 ↗
4. Chan · Mater. Sci. Eng. A · 2002 · 229–331 · 51310.1016/S0921-5093(01)01502-7 ↗
5. Sha · Mater. Sci. Eng. A · 2003 · 343 · 28210.1016/S0921-5093(02)00371-4 ↗
6. Anton · MRS Symp. Proc. · 1990 · 194 · 17510.1557/PROC-194-45 ↗
7. Kim · Intermetallics · 2001 · 9 · 82710.1016/S0966-9795(01)00072-3 ↗
8. Nomura · Mater. Trans. JIM · 2000 · 41 · 159910.2320/matertrans1989.41.1599 ↗
9. Tan · Mater. Sci. Eng. A · 2003 · 341 · 28210.1016/S0921-5093(02)00217-4 ↗
10. Tan · Mater. Sci. Eng. A · 2003 · 355 · 26010.1016/S0921-5093(03)00073-X ↗
11. Jiao · Mater. Sci. Eng. A · 2008 · 485 · 35910.1016/j.msea.2007.08.035 ↗
12. Sikka · Mater. Sci. Eng. A · 1997 · 239–240 · 74510.1016/S0921-5093(97)00662-X ↗
13. Yang · Mater. Res. Soc., Symp. Proc. · 1994 · 364 · 135910.1557/PROC-364-1359 ↗
14. Grylls · Intermetallics · 1998 · 6 · 74910.1016/S0966-9795(98)00032-6 ↗
15. D.H. Hou, Ph.D. Thesis, Ohio State University, 1994.
16. Rong · Intermetallics · 2002 · 10 · 1310.1016/S0966-9795(01)00077-2 ↗
17. Ding · Mater. Sci. Eng. A · 2008 · 485 · 9210.1016/j.msea.2007.07.087 ↗
18. R.G. Ding, I.P. Jones, Mater. Sci. Tech., Submitted for publication.
19. Hollox · J. Appl. Phys. · 1965 · 37 · 81810.1063/1.1708264 ↗
20. Chen · Acta Mater. · 1996 · 44 · 226510.1016/1359-6454(95)00360-6 ↗
21. Cottrell · Philos. Mag. · 1953 · 44 · 82910.1080/14786440808520347 ↗
22. Van den Beukel · Phys. Status Solidi A · 1975 · 30 · 19710.1002/pssa.2210300120 ↗
23. Banerjee · Acta Mater. · 1996 · 44 · 366710.1016/1359-6454(96)00012-2 ↗
24. Rong · Intermetallics · 2003 · 11 · 15110.1016/S0966-9795(02)00196-6 ↗
25. Tappin · Acta Mater. · 1997 · 45 · 492310.1016/S1359-6454(97)00195-X ↗
26. Jiao · Mater. Sci. Eng. A · 2004 · 387–389 · 47610.1016/j.msea.2004.01.139 ↗
27. Qin · Mater. Sci. Eng. A · 2003 · 341 · 21110.1016/S0921-5093(02)00215-0 ↗
28. Sedláček · Metall. Trans. A · 2002 · 33 · 31910.1007/s11661-002-0093-6 ↗
29. Mukherjee · Trans. Am. Soc., Met. · 1969 · 62 · 155