journal article·2000-01

Fatigue behavior of a thermally sprayed low carbon steel coating

Pi Lin Liu, Jian Ku Shang, Oludele O Popoola

Materials Science and Engineering: A· Volume 277· Issue 1-2
Publisher page

Abstract

The fatigue behavior of a thermally sprayed low carbon steel coating has been investigated at room and elevated temperatures. The coating was found to have higher fatigue resistance at 300°C than at room temperature. Further studies indicate that the higher fatigue resistance at the elevated temperature was related to a rapid increase in the elastic modulus of the coating with time during the early part of the fatigue life. The increase in the elastic modulus of the coating was shown to result from annealing of the as-sprayed microstructure at elevated temperatures. Following annealing, the weaker oxide-rich region of the microstructure also became more resistant to crack initiation. The strengthened oxide-rich region delayed accumulation of fatigue damage in the coating, leading to improved fatigue resistance of the coating at elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. 1995 · 28
2. D.R. Marantz, D.R. Marantz, K.A. Kowalsky, US Patent 5,296,667, 1994.
3. J.R. Brandon, R. Taylor, Surface Coatings Technol. 46 (1991) 75.10.1016/0257-8972(91)90151-L ↗
4. Y.Y. Yang, Y.S. Jin, S.Y. Luo, Surface Coatings Technol. 91 (1997) 95.10.1016/S0257-8972(97)80005-9 ↗
5. P. Bengtsson, C. Persson, Surface Coatings Technol. 92 (1997) 78.10.1016/S0257-8972(97)00082-0 ↗
6. H. Bhat, C.R. Clayton, H. Herman, J. Jack, Thin Solid Films 72 (1980) 153.10.1016/0040-6090(80)90569-6 ↗
7. K. Murakami, T. Kujime, T. Okamoto, Mater. Sci. Eng. A 111 (1989) 155.10.1016/0921-5093(89)90207-4 ↗
8. K. Murakami, S. Nakazono, T. Okamoto, Mater. Sci. Eng. A 117 (1989) 207.10.1016/0921-5093(89)90102-0 ↗
9. K. Murakami, H. Asako, T. Okamoto, Y. Miyamoto, Mater. Sci. Eng. A 123 (1990) 261.10.1016/0921-5093(90)90292-B ↗
10. A.A. Rakitsky, E.R. De Los Rios, K.J. Miller, Fatigue Fract. Mater. Struct. 17 (1994) 563.10.1111/j.1460-2695.1994.tb00255.x ↗
11. J.U. Hwang, T. Ogawa, K. Tokaji, Fatigue Fract. Mater. Struct. 17 (1994) 839.10.1111/j.1460-2695.1994.tb00813.x ↗
12. K.F. Wesling, D.F. Socie, B. Beardsley, J. Am. Ceram. Soc. 77 (1994) 1863.10.1111/j.1151-2916.1994.tb07063.x ↗
13. E.F. Rejda, D.F. Socie, B. Beardsley, Fatigue Fract. Mater. Struct. 20 (1997) 1043.10.1111/j.1460-2695.1997.tb01546.x ↗
14. L. Byrnes, M. Kramer, in: C.C. Berndt, S. Sampath (Eds.), The 7th National Thermal Spray Conference, ASM International, Materials Park, OH, 1994, p. 39.
15. 1985
16. H.E. Eaton, R.C. Novak, Surface Coatings Technol. 27 (1986) 257.10.1016/0257-8972(86)90105-2 ↗
17. J.T. DeMasi-Marcin, K.D. Sheffler, S. Bose, J. Eng. Gas Turbines Power 112 (1990) 521.10.1115/1.2906198 ↗
18. K.S. Shi, Z.Y. Qian, M.S. Zhuang, J. Am. Ceram. Soc. 71 (1988) 924.10.1111/j.1151-2916.1988.tb07559.x ↗
19. D. Fargeot, F. Platon, P. Boch, Sci. Ceram. 9 (1977) 382.
20. R. McPherson, Thin Solid Films 83 (1981) 297.10.1016/0040-6090(81)90633-7 ↗
21. H.E. Eaton, R.C. Novak, Surface Coatings Technol. 32 (1987) 227.10.1016/0257-8972(87)90109-5 ↗
22. I. Iordanova, K.S. Forcey, Surface Coatings Technol. 91 (1997) 174.10.1016/S0257-8972(97)00002-9 ↗