Quantitative analysis of the Portevin–Le Chatelier effect by combining digital image correlation and dead-weight-type tensile test
Source abstract
Abstract
Abstract A quantitative evaluation method of a serration deformation behavior by a dead-weight tensile test combined with a strain measurement by a DIC method is proposed. This method applies to binary solid solution aluminum alloys and a ternary cluster strengthened aluminum alloy. In the dead-weight tensile test, the serrated flow was measured as a stress-strain curve with a stepped-shape divided into two stages of a stress rising phase and a strain burst phase. By adopting this tensile test, the serration deformation behavior can be measured with an extremely reproducibility. It was confirmed that an elastic deformation occurs predominantly in the stress rising phase, and this deformation behavior is discussed in relation to the concentration of solid solution elements. Propagation of PLC bands has occurred in the strain burst phase. An activation volume obtained from the strain rate in the PLC bands was in good agreement with a calculated value based on a distribution interval assuming a regular square distribution of solute elements. For the ternary alloy strengthened by clusters, it is also shown that this method can be applied to the qualitative estimation of the change in the residual amount of the solid solution element in the matrix during natural aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. On the Portevin-Le Chatelier effect: theoretical modeling and numerical results10.1016/S0749-6419(03)00035-4 ↗
2. Discontinuous yielding of commercially-pure aluminium10.1016/0022-5096(67)90006-3 ↗
3. Modelling the Portevin-Le Chatelier effects in aluminium alloys a review10.1515/jmbm-2015-0008 ↗
4. Repeated yielding in tin bronze alloys10.1080/14786436308211160 ↗
5. The Portevin-Le chatelier effect in vanadium10.1080/14786437108217009 ↗
6. Baird · 1973
7. Serrated flow in a ferritic stainless steel10.1016/0025-5416(81)90099-9 ↗
8. Serrated plastic flow10.1007/BF02743993 ↗
9. Three types of portevin-Le Chatelier effects experiment and modelling10.1016/j.actamat.2006.10.029 ↗
10. The Portevin Le Chatelier effect a review of experimental findings10.1088/1468-6996/12/6/063001 ↗
11. Franklin
12. A new approach to the Portevin-LeCatelier effect10.1016/0001-6160(76)90040-7 ↗
13. Numerical modelling of the portevin-Le Chatelier effect10.1016/0956-7151(94)00390-4 ↗
14. Spatio-temporal dynamics of the Portevin-Le Chatelier effect: experiment and modelling10.1016/S1359-6454(00)00067-7 ↗
15. Propagating PLC deformation bands in Cu-15 at.% Al polycrystals: experiments and theoretical description10.1016/S0921-5093(00)01709-3 ↗
16. The onset of Portevin-LeChatelier instabilities in tensile testing10.1016/S0921-5093(01)01223-0 ↗
17. Spatiotemporal analysis of Portevin-Le Châtelier deformation bands: theory, simulation, and experiment10.1103/PhysRevB.65.134109 ↗
18. Correlation between band propagation property and the nature of serrations in the Portevin-Le Chatelier effect10.1016/j.actamat.2015.03.027 ↗
19. The Portevin-Le Chatelier effect in aluminium single crystals and polycrystals,10.1016/0022-5096(66)90029-9 ↗
20. Froli
21. The portevin-Le Chatelier effect in deformation with constant stress rate,10.1016/0001-6160(85)90082-3 ↗
22. Introductory remarks to the viewpoint set on propagative plastic instabilities10.1016/0956-716X(93)90100-7 ↗
23. The mechanics of repeated discontinuous yielding of metals,10.1016/0025-5416(67)90061-4 ↗
24. Investigation of the Portevin-LeChâtelier effect in Al-3wt.%Mg alloys by strain-rate and stress-rate controlled tensile tests10.1016/j.msea.2004.01.062 ↗
25. Investigation of changes in the type B PLC effect of Al-Mg-Cu type alloy for various strain rates10.1016/j.msea.2008.06.004 ↗
26. Analysis of the Portevin - Le Chatelier effect in tin bronzes at elevated temperature
27. Plastic instability of Al-Mg alloys during stress rate change test10.1016/j.msea.2009.06.017 ↗
28. Stress drops in serrated flow curves of Al5Mg10.1016/0001-6160(82)90136-5 ↗
29. The problem of the negative strain-rate sensitivity of metals under the portevin-le chatelier deformation conditions,10.1016/0001-6160(81)90089-4 ↗
30. The Portevin-Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy,10.1016/j.actamat.2007.03.007 ↗
31. An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the PLC effect10.1016/j.ijplas.2008.03.008 ↗
32. Digital image correlation investigation of portevin-Le Chatelier effect in an aluminium alloy10.1016/j.matchar.2008.01.004 ↗
33. On nucleation and propagation of PLC bands in an Al-3Mg alloy10.1016/j.msea.2009.07.043 ↗
34. Crossover from continuous to discontinuous propagation in the Portevin-Le Chatelier effect10.1016/j.actamat.2009.10.038 ↗
35. Investigation using digital image correlation of Portevin-Le Chatelier Effect in Hastelloy X under thermo-mechanical loading10.1016/j.ijplas.2014.09.001 ↗
36. Unusual behavior of the Portevin-Le Chatelier effect in an AlMg alloy containing precipitates10.1016/j.msea.2015.04.094 ↗
37. Calorimetric signature of the Portevin-Le Châtelier effect in an aluminum alloy from infrared thermography measurements and heat source reconstruction10.1016/j.msea.2015.10.053 ↗
38. Kinematic and thermal characteristics of Lüders and Portevin-Le Châtelier bands in a medium Mn transformation-induced plasticity steel10.1016/j.actamat.2016.10.069 ↗
39. Portevin-Le Chatelier effect in aluminium-magnesium alloys10.2320/matertrans1960.10.429 ↗
40. Alloying aluminum with magnesium for ductility at warm temperatures (25 to 250°C)10.1007/BF02658303 ↗
41. Serrated flow in aluminium base alloys10.1179/imr.1994.39.6.217 ↗
42. Thermally activated flow of dislocations in Al-Mg binary alloys10.1016/j.actamat.2014.09.056 ↗
43. Influence of natural aging on the precipitation hardening of an AlMgSi alloy10.1016/j.msea.2010.05.003 ↗
44. Effect of pre-ageing on dynamic strain ageing in Al-Mg-Si alloys10.1016/j.msea.2017.01.051 ↗
45. Effect of electrical pulse treatment on the retrogression and re-aging behavior of 6061 aluminum alloy10.1016/j.msea.2017.07.037 ↗
46. 2003 · 31
47. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
48. Effects of temperature and strain rate on plastic deformation of ultrafine-grained copper prepared by equal-channel angular pressing10.2320/matertrans.M2014172 ↗
49. Inverse temperature dependence of activation volume in ultrafine-grained copper processed by accumulative roll-bonding10.1007/s10853-010-5243-4 ↗
50. Hull · 2011
51. Evaluation of solute clusters associated with bake-hardening response in isothermal aged Al-Mg-Si alloys using a three-dimensional atom probe10.1007/s11661-014-2548-y ↗
52. Formation and reversion of clusters during natural aging and subsequent artificial aging in an Al-Mg-Si alloy10.1016/j.msea.2015.02.035 ↗
53. Study of precipitation in Al-Mg-Si alloys by Atom Probe Tomography I. Microstructural changes as a function of ageing temperature10.1016/j.actamat.2015.08.017 ↗
54. Clustering in age-hardenable aluminum alloys10.1002/adem.201800255 ↗
55. Quantitative size-factors for metallic solid solutions10.1007/BF00549722 ↗
56. First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys10.1016/j.commatsci.2012.08.037 ↗