Influence of solution annealing on microstructure and mechanical properties of a quenched and partitioned steel matrix composite processed by SPS
Source abstract
Abstract
Abstract This study examines a quenched and partitioned steel matrix composite, which was reinforced with 10 vol% Mg-PSZ and processed by Spark Plasma Sintering (SPS). The investigations focused specifically on the effect of solution annealing prior to Quenching and Partitioning (Q&P) treatment on the microstructure and the mechanical properties under compressive loading of the composite. The results revealed that the solution annealing step is necessary to form α′-martensite after quenching during the Q&P treatment, which strengthens the material. Furthermore, a substantial amount of Mg-PSZ was found to have transformed in a stress-induced manner under compressive load if a certain fraction of α′-martensite was present in the initial microstructure. However, the solution annealing slightly intensified the destabilization of the Mg-PSZ.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Driving force and logic of development of advanced high strength steels for automotive applications10.1002/srin.201200288 ↗
2. Development and application of Q&P sheet steels
3. Analysis of microstructure evolution in quenching and partitioning automotive sheet steel10.1007/s11661-011-0869-7 ↗
4. Calorimetric study of carbon partitioning from martensite into austenite
5. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
6. Pickering · 1978
7. Strengthening and toughening mechanisms of quenching–partitioning–tempering (Q–P–T) steels10.1016/j.jallcom.2012.02.016 ↗
8. Clyne · 2010
9. Evaluation of R-curve behavior of ceramic–metal functionally graded materials by stable crack growth10.1016/j.engfracmech.2005.03.006 ↗
10. TEM observation of dynamic distortion in 2Y-PSZ/steel composites10.1016/S0272-8842(03)00065-8 ↗
11. Effects of load mode on mechanical properties of ZrO2 (2Y)/TRIP steel composites
12. Phase composition of Mg-PSZ in manganese alloyed TRIP-steel MMC processed via steel casting and conductive sintering10.1002/adem.201000373 ↗
13. Screening of the interactions between Mg-PSZ and TRIP-steel and its alloys during sintering10.1002/adem.200900303 ↗
14. Ceramic matrix composites based on Mg-PSZ with Cr–Ni-steel-additions with improved thermo-mechanical properties10.1016/j.mseb.2010.08.008 ↗
15. Electrochemical corrosion studies of spark plasma sintered zirconia particle-reinforced high-alloy steel at different temperatures10.1016/j.corsci.2014.10.029 ↗
16. Dynamic flow stress behavior of a 5 vol.% Mg-PSZ reinforced TRIP matrix composite at ambient temperature and − 40 °C10.1016/j.matdes.2016.10.045 ↗
17. On the deformation behaviour and martensitic transformations of metastable austenitic steels10.1002/adem.200400411 ↗
18. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
19. Relationship between fracture. Toughness and phase Assemblage in Mg-PSZ10.1111/j.1151-2916.1994.tb07031.x ↗
20. The tetragonal to monoclinic martensitic transformation in Zirconia10.4028/www.scientific.net/KEM.153-154.97 ↗
21. Reinforcing mechanism of Mg-PSZ particles in highly-alloyed TRIP steel10.1002/srin.201100099 ↗
22. Field-assisted sintering technology/spark plasma sintering: mechanisms, materials, and Technology developments10.1002/adem.201300409 ↗
23. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
24. Influence of high-energy ball milling on Mg-PSZ-reinforced TRIP steel-matrix composites synthesized by FAST/SPS10.1016/j.msea.2019.05.104 ↗
25. Fracture toughness of high-alloy austenitic-martensitic TRIP steels after Q&P processing10.1007/s10704-018-0332-5 ↗
26. Rahaman · 2003
27. Quenching and partitioning (Q&P) processing of fully austenitic stainless steels10.1016/j.actamat.2017.05.049 ↗
28. Influence of powder particle size on the compaction behavior and mechanical properties of a high-alloy austenitic CrMnNi TRIP steel during spark plasma sintering10.1007/s11661-015-2861-0 ↗
29. Thermal and deformation-induced phase transformation behavior of Fe–15Cr–3Mn–3Ni–0.1N–(0.05–0.25)C austenitic and austenitic–martensitic cast stainless steels10.1016/j.msea.2015.07.084 ↗
30. Variation of stacking fault energy with austenite grain size and its effect on the MS temperature of γ→ε martensitic transformation in Fe–Mn alloy10.1016/S0921-5093(98)00994-0 ↗
31. Dependence of martensite start temperature on fine austenite grain size10.1016/j.scriptamat.2007.09.017 ↗
32. Strength and failure behaviour of spark plasma sintered steel-zirconia composites under compressive loading10.1002/srin.201100082 ↗
33. Determination of the phase distribution in sintered TRIP-matrix/Mg-PSZ composites using EBSD10.1002/srin.201100064 ↗
34. Ultra high strength stainless steels obtained by quenching‐deformation‐partitioning (QDP) processing10.1002/adem.201800571 ↗
35. Strain rate dependent flow stress and energy absorption behaviour of cast CrMnNi TRIP/TWIP steels10.1002/srin.201100067 ↗