Experimental investigation on the dynamic flow behaviour and structure-property correlation of dual-phase high carbon steel at elevated temperatures
Source abstract
Abstract
Abstract The rate and temperature-dependent deformation mechanism of high carbon steel (HCS) are of fundamental significance due to their comprehensive application in the mining industries. The influences of high strain rate under the influence of thermal loading on the deformation behaviour of HCS under compressive loading are investigated in this paper. Dynamic compressive tests at two different strain rates (750/s and 1750/s), as well as three different temperatures of 25 °C, 100 °C and 175 °C, were performed using a Split Hopkinson Pressure Bar (SHPB) testing machine and the corresponding changes in the microstructures were observed. The material exhibited four stages in the strain hardening rate behaviour during the deformation process along with an irregular trend in the ultimate strength and total elongation. X-Ray diffraction (XRD) peaks at ambient condition exhibited martensitic transformation, whereas, this transformation was suppressed with increasing strain rate. At elevated temperatures, the transformation of martensite into ferrite/tempered martensite (TM) and carbide precipitates was noticed. Moreover, the fractographic study of the deformed specimens provided an insight into the change in the distribution of the dimples which were mainly caused due to the different deformation activities. Transmission electron microscopy (TEM) results confirmed the formation of adiabatic shear bands for all the loading histories. Increase in the width of the shear bands was recorded with increasing strain rates whereas, concerning the influence of temperature, an overall decrease in the width was noticed. Substantial effect of the formation of carbide precipitates on the mechanical behaviour of the material was noticed during the high-temperature deformation process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Hybrid structure of white layer in high carbon steel – formation mechanism and its properties10.1038/s41598-017-13749-7 ↗
2. Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance10.1016/j.ijplas.2016.09.012 ↗
3. A constitutive model for analyzing martensite formation in austenitic steels deforming at high strain rates10.1016/j.ijplas.2011.08.003 ↗
4. Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel10.1016/j.ijplas.2009.03.003 ↗
5. Deformation-induced martensitic characteristics in 304 and 316 stainless steels during room-temperature rolling10.1007/BF02663916 ↗
6. Retained austenite transformation during heat treatment of a 5 Wt Pct Cr cold work tool steel10.1007/s11661-017-4232-5 ↗
7. Thermal stability of austenite retained in bainitic steels10.1016/j.msea.2009.11.063 ↗
8. Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering10.1016/j.msea.2017.03.017 ↗
9. Porter · 2009
10. Investigating the effect of applied strain rate in a single breakage event10.1016/j.mineng.2016.09.010 ↗
11. Electron-microscopy investigation on nanocrystal formation in pure Fe and carbon steel during ball milling10.1016/S0921-5093(03)00631-2 ↗
12. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
13. Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation10.1007/s10853-018-03301-x ↗
14. Rate-dependent mechanical strength and flow behaviour of dual-phase high carbon steel at elevated temperatures: an experimental investigation10.1016/j.msea.2018.12.002 ↗
15. Strain-rate-dependent deformation behavior of high-carbon steel under tensile–compressive loading10.1007/s11837-019-03594-6 ↗
16. Effect of carbon content on the plastic flow of plain carbon steels at elevated temperatures10.1007/BF02642423 ↗
17. Effect of temperature and strain rate on the superplastic behaviour of high-carbon steel10.1016/S0924-0136(98)00049-1 ↗
18. Gray · 2000
19. Hopkinson bar experimental technique: a critical review10.1115/1.1704626 ↗
20. An effective pulse-shaping technique for testing stainless steel alloys in a split-hopkinson pressure bar10.1007/s40870-019-00181-3 ↗
21. A modified damage model for advanced high strength steel sheets10.1016/j.ijplas.2011.01.007 ↗
22. Effect of strengthening mechanism on strain-rate related tensile properties of low-carbon sheet steels for automotive application10.1007/s11665-018-3405-8 ↗
23. Effect of temperature and strain rate on the workability of FGH4096 superalloy in hot deformation10.1016/j.matdes.2016.01.032 ↗
24. Constitutive modelling of the high strain rate behaviour of interstitial-free steel10.1016/j.ijplas.2003.06.004 ↗
25. High strain rate dynamic compressive behaviour of Al6061-T6 alloys10.1016/j.matchar.2017.03.005 ↗
26. A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures10.1016/S0749-6419(99)00021-2 ↗
27. Experimental study on high strain rate behavior of high strength 600–1000 MPa dual phase steels and 1200 MPa fully martensitic steels10.1016/j.matdes.2012.12.068 ↗
28. Effect of martensite strength on the tensile strength of dual phase steels10.1007/BF02385411 ↗
29. Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: experiments and micromechanical modeling10.1016/j.ijplas.2015.09.006 ↗
30. The effect of the strain rate on the stress- strain curve and microstructure of AHSS10.1016/j.jmatprotec.2016.11.023 ↗
31. The plastic deformation behaviour of AISI 4340 alloy steel subjected to high temperature and high strain rate loading conditions10.1016/S0924-0136(97)00079-4 ↗
32. Temperature and strain rate dependent deformation induced martensitic transformation and flow behavior of quenching and partitioning steels10.1016/j.msea.2016.10.083 ↗
33. Evolution of adiabatic shear bands in a dual-phase steel at very high strain rates10.1016/j.msea.2007.11.021 ↗
34. The effects of microstructure, strain rates and geometry on dynamic impact response of a carbon–manganese steel10.1016/j.msea.2011.10.096 ↗
35. On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel10.1016/j.msea.2016.04.050 ↗
36. Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: effects of grain size and strain rate10.1016/j.msea.2017.11.045 ↗
37. Precipitation of carbides in F82H steels and its impact on mechanical strength10.1016/j.nme.2016.09.017 ↗