journal article·2019-09

Multiscale examination of deformation and fracture mechanisms of a duplex advanced high strength steel: Effect of testing temperature and of micromechanical interactions between microstructural constituents

Q. Tonizzo, D. Caillard, A. Perlade, M. Mazière, A.F. Gourgues-Lorenzon

Publisher page

Abstract

Abstract Physical deformation and fracture mechanisms of a duplex high strength, low density steel have been examined, both in individual phases using TEM in-situ tensile tests and in bulk specimens using tensile and impact tests. Deformation in ferrite concentrated into wavy bands. In both ferrite and austenite, strong pinning induced non-continuous motion of dislocations even at low temperature. The stability of austenite against transformation into martensite was varied using either the test temperature or prior low temperature treatment, while keeping the chemistry, processing parameters and microstructural size and morphology constant. It was shown that the brittle-to-ductile transition in this alloy is driven by mechanical interactions between phases, and that cleavage fracture of coarse delta-ferrite is governed by the presence of hard martensite in the fine-grained regions, before or during the mechanical test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Deformation behavior of ferrite-austenite duplex lightweight Fe-Mn-Al-C steel10.1016/j.scriptamat.2011.12.026 ↗
2. Constitutive modeling of the mechanical properties of V-added medium manganese TRIP steel10.1007/s11661-013-1648-4 ↗
3. Fabrication of bimodal-grained Al-free medium Mn steel by double intercritical annealing and its tensile properties10.1016/j.jallcom.2016.04.014 ↗
4. A novel technique for developing bimodal grain size distributions in low carbon steels10.1016/j.scriptamat.2007.08.035 ↗
5. Strain partitioning and mechanical stability of retained austenite10.1016/j.scriptamat.2010.04.020 ↗
6. Deformation behaviour of iron-rich iron-aluminum alloys at low temperatures10.1016/S1359-6454(03)00089-2 ↗
7. Deformation behaviour of iron-rich iron-aluminum alloys at high temperatures10.1016/S1359-6454(03)00144-7 ↗
8. The magnetization of cobalt-aluminium, cobalt-silicon, iron-aluminium and iron-silicon alloys10.1080/14786435808237047 ↗
9. An X-ray and dilatometric study of order and the “K-state” in iron-aluminum alloys10.1016/0022-3697(63)90002-7 ↗
10. Relationship between atomic ordering and fracture in Fe-Al alloys10.1007/BF00543684 ↗
11. Physikalische Messungen an Eisen-Aluminium Legierungen mit 10 bis 50 At.-% Al
12. Phase equilibria and stability of ordered BCC phases in the Fe-rich portion of the Fe–Al system10.1016/S0966-9795(01)00058-9 ↗
13. Dependence of the brittle-to-ductile transition temperature (BDTT) on the Al content of Fe–Al alloys10.1016/j.intermet.2005.02.007 ↗
14. Strengthening mechanisms in Fe-Al based ferritic low-density steels10.1016/j.msea.2017.10.056 ↗
15. Characterization of fracture in medium Mn steel10.1016/j.msea.2017.01.055 ↗
16. Critical role of strain partitioning and deformation twinning on cracking phenomenon occurring during cold rolling of two duplex medium manganese steels10.1016/j.scriptamat.2016.11.009 ↗
17. In-situ characterization of deformation and fracture behavior of hot-rolled medium manganese lightweight steel
18. Dependence of austenite stability and deformation behavior on tempering time in an ultrahigh strength medium Mn TRIP steel10.1016/j.msea.2018.09.098 ↗
19. Crucial microstructural feature to determine the impact toughness of intercritically annealed medium-Mn steel with triplex-phase microstructure10.1016/j.actamat.2018.10.043 ↗
20. Microstructure, plastic flow and fracture behavior of ferrite-austenite duplex low density medium Mn steel10.1016/j.msea.2017.09.002 ↗
21. Effect of austenite stability on microstructural evolution and tensile properties in intercritically annealed medium-Mn lightweight steels10.1007/s11661-016-3433-7 ↗
22. The impact of intercritical annealing in conjunction with warm deformation process on microstructure, mechanical properties and TRIP effect in medium-Mn TRIP steels10.1016/j.msea.2019.01.035 ↗
23. Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum10.1016/j.scriptamat.2012.09.030 ↗
24. Tensile properties of medium Mn steel with a bimodal UFG α + γ and coarse δ-ferrite microstructure10.1007/s11661-017-3979-z ↗
25. Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content10.1016/j.actamat.2014.10.052 ↗
26. Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite10.1016/j.actamat.2018.11.029 ↗
27. Kinetics of dislocations in pure Fe. Part I: in situ straining experiments at room temperature10.1016/j.actamat.2010.02.023 ↗
28. A TEM in situ study of alloying effects in iron: II- Solid solution hardening caused by high concentrations of Si and Cr10.1016/j.actamat.2013.01.049 ↗
29. Observation of the TWIP + TRIP plasticity-enhancement mechanism in Al-added 6 Wt pct medium Mn steel10.1007/s11661-015-2854-z ↗
30. Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels10.1016/j.actamat.2014.09.017 ↗
31. Ductile fracture initiated by interface nucleation in two-phase elastoplastic systems10.1016/j.engfracmech.2013.02.028 ↗