The response of accumulated stress and microstructural refinement on cyclic deformation and associated mechanism in high strength bainite-martenite dual-phase steel
Source abstract
Abstract
Abstract We elucidate here the response of accumulated stress and microstructural refinement on the ultra-high cyclic deformation and associated crack initiation mechanism in high strength bainite-martenite dual-phase steel, where non-inclusion induced crack initiation is the dominated failure mode. The non-inclusion induced crack initiation involved nucleation of microvoids in the coarse bainitic lath when the applied stress accumulated. The density of the microvoids increased with the accumulation of applied stress, and the microvoids that were near the grain boundary connected to form a microcrack. Failure occurred when the microcracks combined to form a macrocrack. The premise of crack propagation is that the total stress intensity factor at the crack tip is larger than granular bright facet (GBF) crack growth threshold value. A mathematical criterion is proposed for non-inclusion induced cracking. The study suggested that the probability of crack initiation is reduced when the microstructural constituent, bainitic lath, is refined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Fang · 1999
2. The mechanism of bainite transformation in steels10.1016/S1359-6462(02)00122-7 ↗
3. The true fracture ductility of a 0.42%C-Ni-Cr-Mo steel having mixed structure of martensite and bainite10.2355/tetsutohagane1955.64.9_1379 ↗
4. Static tensile properties of mixed structure of martensite and residual ferrite in Ni-Cr-Mo steels containing low carbon10.2355/tetsutohagane1955.64.1_78 ↗
5. Yang · 2013
6. Ultra-long cycle fatigue of high-strength carbon steels Part I: review and analysis of the mechanism of failure10.1016/S0921-5093(03)00135-7 ↗
7. Ultra-long cycle fatigue of high-strength carbon steels Part II: estimation of fatigue limit for failure from internal inclusions10.1016/S0921-5093(03)00136-9 ↗
8. Non-inclusion induced crack initiation in multiphase high-strength steel during very high cycle fatigue
9. Ultra-high cycle fatigue property of a multiphase steel microalloyed with niobium10.1016/j.msea.2018.01.085 ↗
10. The potential significance of microalloying with niobium in governing very high cycle fatigue behavior of bainite/martensite multiphase steels10.1016/j.msea.2015.10.044 ↗
11. Piezoelectric fatigue testing machines and devices10.1016/j.ijfatigue.2005.09.020 ↗
12. A novel inclusion inspection method employing 20 kHz fatigue testing10.1007/s11661-003-0011-6 ↗
13. Effect of microstructure on the very high cycle fatigue behavior of a bainite/martensite multiphase steel10.1016/j.msea.2015.02.015 ↗
14. Very high cycle fatigue mechanism of carbide-free bainite/martensite steel micro-alloyed with Nb10.1016/j.msea.2009.08.024 ↗
15. Ultra-high-cycle fatigue properties and fracture mechanism of modified 2.25Cr–1Mo steel at elevated temperatures10.1016/j.ijfatigue.2005.08.016 ↗
16. Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth
17. Very high cycle fatigue behaviors of bainite/martensite multi-phase steel and mechanism of non-inclusion induced crack initiation
18. Effects of grain size on the cleavage fracture toughness of a wheel steel
19. Metal fatigue: effects of small defects and nonmetallic inclusions
20. The effect of hydrogen on fatigue properties of metals used for fuel cell system10.1007/s10704-006-7158-2 ↗
21. Effects of multiple overloads and hydrogen on high-cycle fatigue strength of notched specimen of austenitic stainless steels10.1299/kikaia.77.1747 ↗
22. Defect size dependence on threshold stress intensity for high‐strength steel with internal hydrogen10.1111/ffe.12077 ↗
23. Identification of trapping sites in high-strength steels by secondary ion mass spectrometry for thermally desorbed hydrogen10.2320/jinstmet1952.60.12_1155 ↗
24. Observation of trapping sites of hydrogen and deuterium in high-strength steels with secondary ion mass spectrometry10.2320/matertrans1989.36.1134 ↗
25. Direct observation of hydrogen-trapping sites in newly developed high-strength mooring chain steel by atom probe tomography10.1016/j.pnsc.2013.06.005 ↗
26. Factors influencing the mechanism of superlong fatigue failure in steels10.1046/j.1460-2695.1999.00187.x ↗
27. On the formation of GBF of high-strength steels in the very high cycle fatigue regime10.1016/j.msea.2008.08.011 ↗
28. Evaluations of thermal and mechanical properties of refractories – fundamentals and applications – 7. Fracture mechanics-fundamental (1)
29. Von mises yield criterion and nonlinearly hardening variable thickness rotating annular disks with rigid inclusion10.1016/S0093-6413(02)00282-3 ↗
30. Application of Mises yield criterion to rotating solid disk problem10.1016/j.ijengsci.2011.10.006 ↗
31. On autofrettage of cylinders by limiting circumferential residual stress based on mises yield criterion
32. A Zener–Stroh crack in fiber-reinforced composites with generalized Irwin plastic zone correction10.1016/j.ijmecsci.2014.03.008 ↗
33. Crack-impurity interactions and their role in the embrittlement of Fe alloy crystals charged with light elements10.1016/0921-5093(94)90976-8 ↗