journal article·2018-06

On the accumulation of irreversible plastic strain during compression loading of open-pore metallic foams

Alexander Martin Matz, Bettina Stefanie Matz, Norbert Jost, Gunther Eggeler

Publisher page

Abstract

Abstract The accumulation of plastic strain as an essential element of the compression behavior of metal foams is investigated by analyzing effective stress-strain curves which were recorded during testing. By applying loading/unloading cycles within the low-strain region until reaching the stress plateau, it is studied how reversible elastic deformation is gradually transformed into irreversible plastic deformation and it is shown that both, elastic and plastic strains, contribute to the total strain e. This behavior is found to be independent on the investigated mesostructural foam morphologies. Furthermore, a method is derived which can be used to determine a proof stress σ ϕ Pl = 0.5 at which yielding dominates the deformation of a metal foam.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Elasticity and Material Modeling · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Gibson · 1997
2. Ashby · 2000
3. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
4. The mechanical properties of cellular solids10.1007/BF02645546 ↗
5. Deformation characteristics of metal foams10.1023/A:1004383222228 ↗
6. Compressive deformation and yielding mechanisms in cellular Al alloys determined using X-ray tomography and surface strain mapping10.1016/S1359-6454(98)00025-1 ↗
7. Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foam10.1016/S0022-5096(99)00035-6 ↗
8. Mechanical behavior of metallic foams10.1146/annurev.matsci.30.1.191 ↗
9. Deformation of open-cell aluminum foam10.1016/S1359-6454(01)00294-4 ↗
10. Uniaxial deformation of open-cell aluminum foam: the role of internal damage10.1016/j.actamat.2004.02.035 ↗
11. Mechanisms and mechanics of compressive deformation in open-cell Al foams10.1016/j.mechmat.2003.05.004 ↗
12. Compressive properties of a closed-cell aluminum foam as a function of strain rate and temperature10.1016/j.msea.2009.07.007 ↗
13. Characterization and analysis of compression load behaviour of aluminium alloy foam under the diverse strain rate10.1016/j.jallcom.2015.09.255 ↗
14. Prediction of the effect of artificial aging heat treatment on the yield strength of an open-cell aluminum foam10.1007/s10853-007-2271-9 ↗
15. On an elastic-plastic transition zone in cellular metals10.1007/s00419-003-0287-4 ↗
16. Experimental techniques for the investigation of the elasto‐plastic transition zone of foamed materials10.1002/adem.200600073 ↗
17. On the mechanical performance of closed cell Al alloy foams10.1016/S1359-6454(97)00148-1 ↗
18. Uniaxial deformation of microcellular metals10.1016/j.actamat.2006.03.054 ↗
19. On the plastic collapse stress of open-cell aluminum foam10.1016/j.scriptamat.2008.05.025 ↗
20. Deformation behavior of open-cell stainless steel foams10.1016/j.msea.2014.07.098 ↗
21. A.M. Matz, Werkstoff- und morphologieabhängige Einflüsse auf die mechanischen Eigenschaften von offenporigen Al-11Zn-Schäumen, Shaker, Herzogenrath, 2017.
22. Mesostructural design and manufacturing of open-pore metal foams by investment casting10.1155/2014/421729 ↗
23. Morphological characterization of ceramic sponges for application in chemical engineering10.1021/ie900651c ↗
24. Machining of metal foams with varying mesostructure using wire EDM10.1016/j.procir.2016.02.283 ↗
25. The effect of structural lmperfections on the age-hardening of aluminium-zinc alloys