journal article·2018-04

Alleviating surface tensile stress in e-beam treated tool steels by cryogenic treatment

David A. College, Yuntian Zhu

Publisher page

Abstract

Abstract Electron beam (e-beam) treatment of tool steel surfaces has been available for several decades as an approach to create hard surface layers on tool steels. The e-beam process produces ultrafine grain sizes through ultra-rapid cooling of the melt layer, which helps with improving wear resistance to increase the service life of tools. However, its implementation in many applications has been limited by the accompanying residual tensile stresses in the surface layer, which is undesirable and may lead to premature fracture. Here we report the utilization of cryogenic freezing after e-beam treatment to reduce the residual tensile stress. The e-beamed specimen contained high levels of retained austenite in the surface layer. The cryogenic treatment converted the retained austenite into martensite, and the corresponding volume expansion reduced the peak tensile residual stress by 28%, which makes it a promising method to expand the applications of e-beamed tool steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Pulsed Power Technology Applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Modification of steel surface layer by electron beam treatment
2. Microstructure and property modifications of an AISI H13 (4Cr5MoSiV) steel induced by pulsed electron beam treatment10.1116/1.3490019 ↗
3. Mechanisms of microstructure formations in M50 steel melted layer by high current pulsed electron beam10.1016/j.nimb.2012.07.021 ↗
4. Microstructure modifications and corrosion behaviors of Cr4Mo4V steel treated by high current pulsed electron beam10.1016/j.matchemphys.2010.12.016 ↗
5. Influence of irradiation number of high current pulsed electron beam on the structure and properties of M50 steel10.1016/j.nimb.2010.04.019 ↗
6. Surface hardening of AISI 4340 steel by electron beam treatment10.1016/S0257-8972(09)90082-2 ↗
7. Crater-formation-induced metastable structure in an AISI D2 steel treated with a pulsed electron beam10.1016/j.vacuum.2011.11.013 ↗
8. Electron beam surface treatment. Part I: surface hardening of AISI D3 tool steel10.1016/S0042-207X(02)00583-3 ↗
9. Electron beam surface remelting of AISI D2 cold-worked die steel10.1016/S0257-8972(02)00136-6 ↗
10. Microstructures and phase formations in the surface layer of an AISI D2 steel treated with pulsed electron beam10.1016/j.jallcom.2006.08.280 ↗
11. Cross-sectional analysis of the graded microstructure in an AISI D2-steel treated with low energy high-current pulsed electron beam10.1016/j.apsusc.2008.10.123 ↗
12. Mechanisms of nanostructure and metastable phase formations in the surface melted layers of a HCPEB-treated D2 steel10.1016/j.actamat.2006.05.053 ↗
13. Surface modification of 40CrNiMo7 steel with high current pulsed electron beam treatment10.1016/j.nimb.2015.11.039 ↗
14. Surface treatment by high current pulsed electron beam10.1016/S0257-8972(02)00657-6 ↗
15. Texture and microstructure at the surface of an AISI D2 steel treated by high current pulsed electron beam10.1007/s11661-007-9146-1 ↗
16. Nanostructure formations and improvement in corrosion resistance of steels by means of pulsed electron beam surface treatment10.1155/2013/381682 ↗
17. Pulsed electron-beam melting of high-speed steel: structural phase transformations and wear resistance10.1016/S0257-8972(01)01542-0 ↗
18. Evolution of residual stress states in surface layers of an AISI D2 steel treated by low energy high current pulsed electron beam10.1016/j.vacuum.2012.03.061 ↗
19. Physical foundations for surface treatment of materials with low energy, high current electron beams10.1016/S0257-8972(99)00604-0 ↗
20. Roberts · 1998
21. C.W. White, M.J. Aziz, Energy deposition, heat flow, and rapid solidification during pulsed-laser and electron-beam irradiation on materials, in: L.E. Rehn, S.T. Picraux, H. Wiedersich (Eds.) Surface Alloying by Ion, Electron, and Laser Beams: Papers Presented at the 1985 ASM Materials Science Seminar, 12-13 October 1985, Toronto, Ontario, Canada, ASM, 1987.
22. V.P. Rotshtein, Metallic materials processing with intense pulsed electron beams, in: M. Markovits, J. Shiloh (Eds.) Proceedings of the 12th International Conference on High-Power Particle Beams, BEAMS’98, IEEE (Cat. No.98EX103), 1998, pp. 105–110.10.1109/BEAMS.1998.822397 ↗
23. Use of low-energy, high-current electron beams for surface treatment of materials10.1016/S0257-8972(97)00093-5 ↗
24. Pulsed electron-beam technology for surface modification of metallic materials10.1116/1.581369 ↗
25. D.M. Follstaedt, S.T. Picraux, Microstructures of surface-melted alloys, in: L.E. Rehn, S.T. Picraux, H. Wiedersich (Eds.) Surface Alloying by Ion, Electron, and Laser Beams: Papers Presented at the 1985 ASM Materials Science Seminar, 12-13 October 1985, Toronto, Ontario, Canada, ASM, 1987, p. 417.
26. High-energy density beams and plasmas for micro- and nano-texturing of surfaces by rapid melting and solidification10.1088/0022-3727/44/17/174026 ↗
27. Metal surface layers after pulsed electron beam treatment10.1016/j.surfcoat.2014.08.039 ↗
28. Analysis of the evaporation and re-condensation processes induced by pulsed beam treatments10.1016/j.ijheatmasstransfer.2013.05.036 ↗
29. X-ray diffraction residual stress techniques
30. Metallurgical principles of cryogenically treated tool steels – a review on the current state of science10.1007/s00170-010-2935-5 ↗
31. ASTM E975-13 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation, ASTM International, West Conshohocken, PA, 2013.
32. SAE Iron and Steel Technical Committee · 1971
33. Residual Stress Measurement by X-ray Diffraction: HS-784. SAE International, 2003.
34. The effect of quench rate on the martensitic transformation in Fe−C alloys10.1007/BF02814881 ↗
35. The deformation and ageing of mild steel III: discussion of results10.1088/0370-1301/64/9/303 ↗
36. The cleavage strength of polycrystals
37. Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels10.1016/j.jmatprotec.2010.07.007 ↗
38. The influence of deep cryogenic treatment on the properties of high-vanadium alloy steel10.1016/j.msea.2016.03.039 ↗
39. Low-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatment10.1016/j.actamat.2012.11.045 ↗
40. The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel10.1016/j.msea.2015.11.078 ↗
41. Influence of the shock wave pressure gradient in α-Fe irradiated by a high-power ion beam on the occurrence of a microhardness maximum at large depths10.1134/1.1262011 ↗