journal article·2018-05

Effects of loading conditions on twin characteristics in an extruded Mg-Zr alloy

Minghong Zhong, Jing Zhang, Yi Zheng, Guoqiang Xi, Xin Wan, Fusheng Pan

Publisher page

Abstract

Abstract In the present study, compression and compression-tension tests of different strain levels (maximum 4%) were carried out on an extruded Mg-Zr alloy rod along the extrusion direction. The effects of loading conditions (strain level and strain path) on twin characteristics (twin aspect ratio and twin incidence) in the alloy were quantitatively investigated from a statistical viewpoint, with focus on seeking for an appropriate loading condition where dense and fine twin lamellae can be obtained. The results show that the twin aspect ratio strongly depends on the strain path when the accumulated compressive strain levels are relatively small (≤ 2%) and that compression-tension deformation can obtain finer twin lamellae than simple compression deformation. In addition, under compression-tension deformation with the same accumulated compression strain (0%, 1% and 2%), the higher the initial compression strain is, the finer the residual twins become. The twin incidence, which shows an upward tendency with the increase of the initial compression strain (from 0.09 at the initial compression strain of 2% to 0.57 at that of 6%), is found to be sensitive to the strain path only when the accumulated compression strain is 0%. When the accumulated compression strain is larger (4%), the strain path has little effect on both the twin aspect ratio and the twin incidence.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Preface to the viewpoint set on: the current state of magnesium alloy science and technology10.1016/j.scriptamat.2010.06.029 ↗
2. Magnesium and its alloys application in automotive industry10.1007/s00170-007-1279-2 ↗
3. First-principles study of stacking fault energies in Mg-based binary alloys10.1016/j.commatsci.2013.07.012 ↗
4. Recent research and developments on wrought magnesium alloys10.1016/j.jma.2017.09.001 ↗
5. Enhancing plastic deformability of Mg and its alloys—a review of traditional and nascent developments10.1016/j.jma.2017.11.001 ↗
6. Dependence of compressive deformation on pre-strain and loading direction in an extruded magnesium alloy: texture, twinning and de-twinning10.1016/j.msea.2013.12.038 ↗
7. Influence of deformation twinning on static annealing of AZ31 Mg alloy10.1016/j.actamat.2013.06.037 ↗
8. Hardening evolution of AZ31B Mg sheet10.1016/j.ijplas.2006.03.005 ↗
9. Twinning and texture development in two Mg alloys subjected to loading along three different strain paths10.1016/j.actamat.2007.03.006 ↗
10. Role of {10-12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
11. Activation mode dependent {10-12} twinning characteristics in a polycrystalline magnesium alloy10.1016/j.scriptamat.2009.10.027 ↗
12. Role of initial {10-12} twinning in the fatigue behavior of rolled Mg–3Al–1Zn alloy10.1016/j.scriptamat.2010.01.021 ↗
13. Twinning effects in a rod-textured AM30 Magnesium alloy10.1016/j.ijplas.2011.08.001 ↗
14. Improvement of formability and mechanical properties of magnesium alloys via pre-twinning: a review10.1016/j.matdes.2014.05.034 ↗
15. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
16. Tensile properties of copper with nano-scale twins10.1016/j.scriptamat.2005.01.033 ↗
17. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
18. Strengthening and toughening of magnesium alloy by {10-12} extension twins10.1016/j.scriptamat.2011.09.033 ↗
19. Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling10.1016/j.scriptamat.2012.02.047 ↗
20. Influence of orientation on twin nucleation and growth at low strains in a magnesium alloy10.1016/j.actamat.2014.07.013 ↗
21. Sensitivity of deformation twinning to grain size in titanium and magnesium10.1016/j.actamat.2011.09.018 ↗
22. The effect of twinning and detwinning on the mechanical property of AZ31 extruded magnesium alloy during strain-path changes10.1016/j.matdes.2014.05.056 ↗
23. Influence of pre-strain on de-twinning activity in an extruded AM30 magnesium alloy10.1016/j.msea.2014.03.046 ↗
24. A constitutive model of twinning and detwinning for hexagonal close packed polycrystals10.1016/j.msea.2012.06.038 ↗
25. Electron backscatter diffraction observations of twinning–detwinning evolution in a magnesium alloy subjected to large strain amplitude cyclic loading10.1016/j.matdes.2014.09.079 ↗
26. The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy10.1016/j.actamat.2006.09.010 ↗
27. Statistical analyses of deformation twinning in magnesium10.1080/14786431003630835 ↗
28. Detwinning behavior of Mg–3Al–1Zn alloy at elevated temperatures10.1016/j.msea.2014.08.034 ↗
29. The different effects of solute segregation at twin boundaries on mechanical behaviors of twinning and detwinning10.1016/j.msea.2015.07.049 ↗
30. Estimating critical stresses required for twin growth in a magnesium alloy10.1007/s11661-012-1573-y ↗
31. The effect of twin–twin interactions on the nucleation and propagation of {10-12} twinning in magnesium10.1016/j.actamat.2013.02.030 ↗