Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction
Source abstract
Abstract
Abstract Many researchers have investigated the relationship between hardness and crystallographic texture, including the Hall–Petch effect, crystal anisotropic-plasticity, dislocation strengthening, and strengthening by solutions. However, few studies have considered these effects simultaneously. This paper reports a method for estimating the impact of these multiple effects on the microscopic hardness of ferritic steel solely via electron backscatter diffraction (EBSD). Additionally, the correlation between the estimated hardness and fatigue damage is evaluated. The estimation method is based on the experimental correlation between the crystallographic texture obtained via EBSD and the hardness measured using nanoindenters. Three types of extra-low-carbon steel with different grain sizes were evaluated. First, a micro-Vickers test was conducted for each grain and the hardness distributions in the steel were evaluated. Second, EBSD measurements and nanoindentation tests were conducted at same locations to evaluate the relationship between the hardness obtained via nanoindentation and individual factors such as grain size, Taylor factor in the loading direction of indentation, kernel average misorientation (KAM), and indentation load. Each crystallographic factor had a rather low correlation with hardness, even though these low correlations were analogous to those of previous studies. Thus, we presume that the low correlations are due to the multiple effects of these factors, and a multiple-effect relational equation based on the strengthening mechanism is proposed with constants based on fitted data. The predicted and experimental hardness distributions were similar. Moreover, the grains with lower predicted hardness tended to be damaged after the fatigue test. These results suggest that the proposed equation can be used to predict the location of the lowest hardness in a material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Murakami · 2002
2. Fatigue strength prediction for inhomogeneous face-centered cubic metal based on Vickers hardness10.1016/j.ijfatigue.2012.09.021 ↗
3. The role of grain boundaries on fatigue crack initiation – An energy approach10.1016/j.ijplas.2010.09.009 ↗
4. Kato · 2007
5. Strengthening mechanism of metallic materials10.9773/sosei.54.868 ↗
6. Size effects in materials due to microstructural and dimensional constraints: a comparative review10.1016/S1359-6454(98)00231-6 ↗
7. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
8. Relationship between hardness and grain size in electrodeposited copper films10.1016/j.msea.2006.12.101 ↗
9. E. Sakurada, Japan Patent Kokai, P2010-256308A, 2010.
10. Understanding the factors controlling the hardness in martensitic steels10.1016/j.scriptamat.2015.08.010 ↗
11. Influence of crystal orientation on hardness and nanoindentation deformation in ion-irradiated stainless steels10.1016/j.jnucmat.2010.12.197 ↗
12. Determination of hardness and elastic modulus inverse pole figures of a polycrystalline commercially pure titanium by coupling nanoindentation and EBSD techniques10.1016/j.msea.2014.06.098 ↗
13. Orientation dependent deformation by slip and twinning in magnesium during single crystal indentation10.1016/j.actamat.2015.01.046 ↗
14. Analysis of the variation in nanohardness of pearlitic steel: influence of the interplay between ferrite crystal orientation and cementite morphology10.1016/j.msea.2014.08.019 ↗
15. Indentation size effect in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
16. Evaluation of material property of austenitic stainless steel using nano-indentation
17. Study of the interaction between the indentation size effect and Hall–Petch effect with spherical indenters on annealed polycrystalline copper
18. ISO 14577-1, Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method, 2015.
19. Evaluation of crystallographic orientation changes during fatigue crack initiation process in ultra-low carbon steel by EBSD method10.1299/kikaia.76.716 ↗
20. Damage evaluation of ferrite and ferrite-pearlite steel during fatigue crack initiation by EBSD10.4028/www.scientific.net/AMR.891-892.410 ↗
21. Plastic strain in metals
22. Takahashi · 1999
23. Measurement of stored energy in Fe–48%Ni alloys strongly cold-rolled using three approaches: neutron diffraction, Dillamore and KAM approaches10.1016/j.msea.2014.07.037 ↗
24. Stored energy and Taylor factor relation in an Al-Mg-Mn alloy sheet worked by continuous cyclic bending10.2320/matertrans.45.2316 ↗
25. Creep-damage assessment of high chromium heat resistant steels and weldments10.1016/j.msea.2008.08.045 ↗