Effect of microstructural evolution on deformation behaviour of pre-strained dual-phase steel
Source abstract
Abstract
Abstract The influence of microstructural evolution on the strain hardening and non-uniform deformation behaviour of pre-strained ferrite-martensite DP steel was studied using a crystal plasticity finite element method (CPFEM). The material parameters in the CPFEM were identified through a systematic procedure by fitting models to the experimental results of micro-tensile tests. The CPFEM with the identified parameters were applied to the analysis of virtual models with focus on the microstructural factors such as the angle of interphase boundary, the orientation of habit plane in the martensite phase, and the intensity of texture in the ultrafine-grained ferrite phase developed in the severely-deformed sample. The analysis results suggested the following influences of microstructural factors on the deformation behaviour. The formation of deformation bands in the ferrite phase depends on the configuration of the interphase boundary, the orientation of the habit plane in neighbouring martensite phase and the intensity of texture in the ferrite phase. The suppressions of the deformation bands by controlling microstructure could contribute to later onset of necking and resultant higher strain hardening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Effect of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel10.1007/BF02648546 ↗
2. Mechanisms of void formation during tensile testing in a commercial, dual-phase steel10.1016/j.actamat.2010.12.039 ↗
3. Deformation response of ferrite and martensite in a dual-phase steel10.1016/j.actamat.2013.10.001 ↗
4. The influence of microstructure and composition on the plastic behaviour of dual-phase steels10.1016/j.actamat.2014.04.015 ↗
5. Damage and fracture of dual-phase steels: Influence of martensite volume fraction10.1016/j.msea.2015.08.073 ↗
6. Influence of martensite composition and content on properties of dual phase steels10.1007/BF02659924 ↗
7. Influence of martensite content and morphology on the toughness and fatigue behavior of high-martensite dual-phase steels10.1007/s11661-999-0269-4 ↗
8. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
9. Influence of nanoparticle reinforcements on the strengthening mechanisms of an ultrafine-grained dual phase steel containing titanium10.1016/j.matdes.2012.07.068 ↗
10. The effect of martensite particle size on tensile fracture of surface-carburised AISI 8620 steel with dual phase core microstructure10.1016/S0261-3069(02)00065-1 ↗
11. Effect of grain refinement to 1 μm on strength and toughness of dual-phase steels10.1016/j.msea.2010.08.062 ↗
12. Effect of martensite distribution on damage behaviour in DP600 dual phase steels10.1016/j.msea.2009.03.055 ↗
13. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel10.1016/j.msea.2014.02.058 ↗
14. Mechanical behavior of steels consisting of two ductile phases10.2355/isijinternational1966.22.665 ↗
15. Virtual testing of dual-phase steels: Effect of martensite morphology on plasticity flow behavior10.1016/j.msea.2016.07.118 ↗
16. An overview of dual-phase steels: Advances in microstructure-oriented processing and micromechanically guided design10.1146/annurev-matsci-070214-021103 ↗
17. Quantification of large deformation with punching in dual phase steel and change of its microstructure‒Part I: Proposal of the quantification technique of the punching damage of the dual phase steel10.2355/isijinternational.ISIJINT-2016-312 ↗
18. Quantification of large deformation with punching in dual phase steel and change of its microstructure‒Part III: Micro‐tensile behavior of pre-strained dual-phase steel10.2355/isijinternational.ISIJINT-2016-318 ↗
19. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modelling: Theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
20. Shear pipe effects and dynamic shear-strain localization in martensitic steels10.1016/j.actamat.2009.06.028 ↗
21. Simulation of orientation gradients in a ferrite matrix containing hard martensitie under plane-strain flange deformation10.1016/j.actamat.2008.12.034 ↗
22. A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model10.1016/j.ijplas.2010.12.001 ↗
23. Stress-strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories10.1016/j.actamat.2012.08.054 ↗
24. Microscale-calibrated modeling of the deformation response of dual-phase steels10.1016/j.actamat.2013.11.036 ↗
25. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
26. Elastic constants and internal friction of martensitic steel, ferritic-pearlitic steel, and α-iron10.1016/j.msea.2006.11.147 ↗
27. Micromechanical analysis of martensite distribution on strain localization in dual phase steels by scanning electron microscopy and crystal plasticity simulation10.1016/j.msea.2016.05.094 ↗
28. High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels10.1016/j.actamat.2015.05.038 ↗
29. Three-dimensional orientation microscopy in a focused ion beam-scanning electron microscope: A new dimension of microstructure characterization10.1007/s11661-007-9418-9 ↗
30. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
31. Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels10.1016/j.actamat.2011.03.062 ↗
32. Micro-tension behaviour of lath martensite structures of carbon steel10.1016/j.msea.2012.09.099 ↗
33. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
34. Integrated experimental-simulation analysis of stress and strain partitioning in multiphase alloys10.1016/j.actamat.2014.07.071 ↗
35. Effect of texture on shear band formation in plane strain tension/compression and bending10.1016/j.ijplas.2006.03.014 ↗