journal article·2016-07

Local texture-microstructure correlation due to deformation localization in ECAP-processed nickel

Jörn Leuthold, Gerrit Reglitz, Matthias Wegner, Gerhard Wilde, Sergiy V. Divinski

Publisher page

Abstract

Abstract A correlation between the local microstructure and texture is investigated in ultrafine grained nickel of 99.6 wt% purity deformed via Equal Channel Angular Pressing (ECAP). Annealing at 700 K induces discontinuous recrystallization and a layered microstructure with alternating recrystallized coarse- and remaining ultrafine grained areas is formed. A large scale analysis of as-deformed Ni applying orientation-imaging microscopy revealed local texture variations on a similar scale. The shear band formation via plastic flow localization induces systematic variations of local texture and microstructure which affects subsequent recrystallization. The correlation of fiber components of the shear texture and the spatial distribution of specific orientations before and after annealing allows to identify regions of decreased thermal stability. The dominant texture feature after annealing is found to be a prominent rotated cube component, which is a consequence of nucleation and growth of new grains on the cost of the defected microstructure during recrystallization. The formation of the observed anisotropy as a consequence of the heterogeneous distribution of crystal orientations is discussed within the context of dynamic recrystallization, plastic instabilities, stored energy and recrystallization nucleation mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
3. Stored energy, vacancies and thermal stability of ultra-fine grained copper10.1016/j.msea.2008.02.048 ↗
4. Thermal stability of ECAP processed pure copper10.1016/j.msea.2007.01.042 ↗
5. The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties10.1016/S0921-5093(01)01339-9 ↗
6. Texture evolution in severe plastic deformation by equal channel angular extrusion10.1002/adem.200310084 ↗
7. Texture after ECAP of a cube-oriented Ni single crystal10.1016/j.actamat.2008.03.017 ↗
8. Texture evolution in equal-channel angular extrusion10.1016/j.pmatsci.2009.01.001 ↗
9. Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field10.1016/j.actamat.2003.12.027 ↗
10. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing10.1016/S1359-6454(03)00161-7 ↗
11. Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution10.1016/j.actamat.2011.03.015 ↗
12. Influence of an intrinsic defect structure of different texture components on the anisotropy of elastic properties of deformed copper
13. Limited fibre components in texture analysis. Texture contribution to the anisotropy of physical properties10.4028/www.scientific.net/MSF.157-162.1565 ↗
14. Simulation of orientation distribution function of the copper rolling texture by the way of partial axial textures10.1016/0956-716X(92)90154-7 ↗
15. A new approach to describing three-dimensional orientation distribution functions in textured materials. I. Formation of pole density distribution on model pole figures
16. The roles of oriented nucleation and oriented growth on recrystallization textures in commercial purity aluminium10.1016/0921-5093(95)09879-8 ↗
17. Effects of heterogeneity on recrystallization kinetics of nanocrystalline copper prepared by dynamic plastic deformation10.1016/j.actamat.2014.03.036 ↗
18. Effect of heat treatment on diffusion, internal friction, microstructure and mechanical properties of ultra-fine-grained nickel severely deformed by equal-channel angular pressing10.1016/j.actamat.2014.08.064 ↗
19. Effect of pinning by an orientation gradient on the thermal stability of ultrafine grained Ni produced by equal channel angular pressing10.1063/1.4867416 ↗
20. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗
21. Grain boundary self-diffusion in polycrystalline nickel of different purity levels10.1016/j.actamat.2009.09.015 ↗
22. Cube texture in hot-rolled aluminum alloy 1050 (AA1050)-nucleation and growth behavior10.1016/j.actamat.2008.02.037 ↗
23. Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel10.1016/j.msea.2007.11.072 ↗
24. L.E. Murr, E.A. Trillo, S. Pappu, C. Kennedy, Adiabatic shear bands and examples of their role in severe plastic deformation, 7, 2002, pp. 3337–3360.10.1023/A:1016541023502 ↗
25. Microstructural evolution in copper subjected to severe plastic deformation: experiments and analysis10.1016/j.actamat.2006.07.008 ↗
26. Microstructure and texture gradient in copper deformed by equal channel angular pressing10.1016/j.actamat.2006.11.005 ↗
27. Microstructure and stength of nickel at large strains10.1016/S1359-6454(00)00082-3 ↗
28. Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains10.1016/j.actamat.2008.07.040 ↗
29. Quantification of the microstructures of high purity nickel subjected to dynamic plastic deformation10.1016/j.actamat.2011.11.035 ↗
30. Theory of torsion texture development10.1016/0001-6160(84)90050-6 ↗
31. Kocks · 2000
32. Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation10.1016/j.scriptamat.2009.04.006 ↗
33. Stable and unstable flow in materials processed by equal-channel angular pressing with an emphasis on magnesium alloys10.1007/s11661-009-0100-2 ↗
34. Finite element modelling of plastic instability during ECAP processing of flow-softening materials10.1016/j.msea.2006.05.116 ↗
35. Strain mapping of a triple junction in nanocrystalline Pd10.1016/j.actamat.2011.08.020 ↗