journal article·2004-03

Effects of growth rate and amount of Ca–Si modifier on the microstructure scales of granular eutectics in an austenite medium Mn steel

Gaofei Liang, Zhenming Xu, Jia Li, Xiangyang Liu, Jianguo Li

Materials Science and Engineering: A· Volume 369· Issue 1-2
Publisher page

Abstract

Abstract Results presented in this paper contribute to investigation of the effects of growth rate ( V ) and the amount of added Ca–Si modifier ( α k ) on the microstructure scales of granular eutectics such as the volume fraction ( f ) and diameter ( d ) in an austenite medium Mn steel (AMMS). Directional solidification of AMMS has been carried out using vertical Bridgman method. There are three critical growth rates for each AMMS sample, | V | 1 , | V | 2 , and | V | 3 . If V V | 1 , the microstructure of AMMS is composed of pearlite, granular (Fe,Mn) 3 C carbides in grain, network carbides surrounding grain, and retained austenite. If | V | 1 V V | 2 , the granular γ-(Fe,Mn) 3 C eutectics and (Fe,Mn) 3 C carbides are unevenly distributed in the grain surrounded by inter-boundary carbides. The needle-like carbides may appear when α k ≤1.0%. If | V | 2 V V | 3 , the microstructure is similar to that at | V | 1 V V | 2 , but without the granular/needle-like carbides in grain. If | V |>| V | 3 , the microstructure is like that at | V | 2 V V | 3 although the inter-boundary (Fe,Mn) 3 C carbides are absent. Each critical growth rate decreases with increasing α k . The granular eutectics nucleate in the liquid pockets among the primary austenite dendrites at the later stage of solidification. For a constant α k , f initially increasing with V attains a peak and then follows a decreasing trend, and d always decreases with the increment of V . For a given V , f increases, but d decreases with increasing α k . The growth rate ( V 0 ) at which f attains its peak for one AMMS decreases as α k increases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Zhenming · Wear · 1987 · 120 · 30510.1016/0043-1648(87)90024-X ↗
2. Qichuan · J. Mater. Sci. Lett. · 1990 · 9 · 61610.1007/BF00725896 ↗
3. Xu · Acta Metall. Sin. · 2001 · 14 · 79
4. Liang · J. Mater. Sci. Lett. · 2003 · 22 · 54910.1023/A:1022902823270 ↗
5. Liang · Acta Metall. Sin. (in Chinese) · 2003 · 39 · 550
6. Liang · Tribology (in Chinese) · 2003 · 23 · 112
7. Chu · Metall. Trans. · 1994 · 25A · 63710.1007/BF02651605 ↗
8. Xu · Mater. Sci. Eng. · 2002 · 335A · 109
9. Jiang · Chin. Sci. Bull. · 1990 · 16 · 1167
10. H.Q. Hu, in: Solidification of Metal, Metallurgical Industry Press, Beijing, China, 1984, pp. 54 (in Chinese).
11. Herbrrg · Acta Mater. · 2002 · 50 · 253710.1016/S1359-6454(02)00081-2 ↗