journal article·2010-08

Effective modulus of heterogeneous materials in thin film configurations

X.M. Xie, H. Fan

Materials Science and Engineering: A· Volume 527· Issue 21-22
Publisher page

Abstract

Abstract Thin film is one of the important geometric configurations in the microelectronic devices. The traditional theories for heterogeneous material are challenged for their application to the thin film configurations (the free-standing and substrate-attached thin films). In the present paper, a finite element analysis with a statistic procedure is proposed to estimate the effective properties of thin films. For the free-standing thin film, the effective stiffness decreases as film thickness decreases. Comparison is made between numerical simulations and analytical solutions derived from a plane stress self-consistent scheme. For the substrate-attached thin film, the effective stiffness is affected by the relative stiffness of the substrate to the film. The numerical simulation shows the effective stiffness of the substrate-attached thin film can vary between the equivalent value of the free-standing thin film and Voigt bound. The three-dimensional Hashin–Shtrikman bounds fail to gauge the effective stiffness of thin film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Numerical methods in engineering · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Volinsky · Mater. Res. Soc. Symp. · 2001 · 649 · Q5.3.1
2. Zhang · Int. J. Mech. Sci. · 2006 · 48 · 89910.1016/j.ijmecsci.2006.01.003 ↗
3. Roberts · J. Mech. Phys. Solids · 1999 · 47 · 202910.1016/S0022-5096(99)00016-2 ↗
4. Budiansky · J. Mech. Phys. Solids · 1965 · 13 · 22310.1016/0022-5096(65)90011-6 ↗
5. Hill · J. Mech. Phys. Solids · 1965 · 13 · 21310.1016/0022-5096(65)90010-4 ↗
6. Eshelby · Proc. Roy. Soc. A · 1957 · 241 · 37610.1098/rspa.1957.0133 ↗
7. Morris · Int. J. Eng. Sci. · 1970 · 8 · 4910.1016/0020-7225(70)90014-5 ↗
8. Christensen · J. Mech. Phys. Solids · 1979 · 27 · 31510.1016/0022-5096(79)90032-2 ↗
9. Benevesite · Mech. Mater. · 1987 · 6 · 14710.1016/0167-6636(87)90005-6 ↗
10. Taya · Int. J. Solids Struct. · 1981 · 17 · 55310.1016/0020-7683(81)90018-4 ↗
11. Weng · Int. J. Eng. Sci. · 1984 · 22 · 84510.1016/0020-7225(84)90033-8 ↗
12. Mori · Acta Metall. · 1973 · 21 · 57110.1016/0001-6160(73)90064-3 ↗
13. Hill · Proc. Phys. Soc. · 1952 · A65 · 34910.1088/0370-1298/65/5/307 ↗
14. Hill · J. Mech. Phys. Solids · 1963 · 11 · 35710.1016/0022-5096(63)90036-X ↗
15. Mura · 1987
16. Hashin · J. Mech. Phys. Solids · 1962 · 10 · 33510.1016/0022-5096(62)90004-2 ↗
17. Hashin · J. Mech. Phys. Solids · 1963 · 11 · 12710.1016/0022-5096(63)90060-7 ↗
18. Walpole · J. Mech. Phys. Solids · 1966 · 14 · 15110.1016/0022-5096(66)90035-4 ↗
19. Hashin · J. Appl. Mech. · 1983 · 50 · 48110.1115/1.3167081 ↗
20. Christensen · J. Mech. Phys. Solids · 1990 · 38 · 37910.1016/0022-5096(90)90005-O ↗
21. Huang · Acta Mater. · 2000 · 48 · 326110.1016/S1359-6454(00)00128-2 ↗
22. Saha · Acta Mater. · 2002 · 50 · 2310.1016/S1359-6454(01)00328-7 ↗
23. Fan · Mater. Sci. Eng. · 2010 · A527 · 500810.1016/j.msea.2010.04.054 ↗
24. ANSYS10.0, ANSYS Inc., 2004.10.1016/S1365-6937(04)00398-3 ↗
25. MATLAB R2007a, The Mathworks, Inc., 2007.
26. Mendenhall · 2006
27. Xu · CMC Comput. Mater. Continua · 2008 · 7 · 119
28. J. Choi, Ph.D. Thesis, Ohio State University, 2004.
29. den Tooder · Model. Simul. Mater. Sci. Eng. · 1999 · 7 · 90910.1088/0965-0393/7/6/301 ↗
30. Taya · 1989
31. Torquato · J. Mech. Phys. Solids · 1997 · 45 · 142110.1016/S0022-5096(97)00019-7 ↗
32. Torquato · J. Mech. Phys. Solids · 1998 · 46 · 141110.1016/S0022-5096(97)00083-5 ↗