journal article·2004-05

Homogenization of ductile iron using partial melting aided by modeling

M Nili-Ahmadabadi, M Mosallaiee-Pour

Materials Science and Engineering: A· Volume 373· Issue 1-2
Publisher page

Abstract

Abstract To provide sufficient hardenability, ductile iron is alloyed with some elements like Mn, Cu, Mo or Ni. However, alloying elements segregation is intrinsic to solidification of ductile iron. Segregation of these elements causes a non-uniform structure which reduces the mechanical properties of iron. It was shown by many researches that high temperature solid state homogenization even after a long period does not effectively reduce the segregation of alloying elements. In this study, partial melting homogenization (PMH) of 1% Mn ductile iron was used for studying homogenization. The homogenization was carried out at different temperature for different periods. The results show that heating above eutectic temperature increases liquid fraction as a function of time while, heating between eutectic temperatures of different region causes melting of heavily segregated regions only. It was shown that the liquefied region shrinks during PMH process which eventually disappears. SEM–EDX analysis results show heating below eutectic temperature reduces segregation extensively, while above it, segregation intensity increases. Using calculated segregation profile, assuming uniform chemical composition of liquid pool and local equilibrium at solid–liquid interface, homogenization time for different homogenization temperatures were calculated. The calculated results show good agreement with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. D.A. Porter, K.E. Easterling, Phase Transformations in Metals and Alloys, second ed., Chapman & Hall, London, 1992.10.1007/978-1-4899-3051-4 ↗
2. M.C. Felemings, Solidification Processing, McGraw-Hill, New York, 1974.
3. B. Kovacs, The Effects of Alloying Elements and Their Segregation in ADI, Processing of the International Conference on Austempered Ductile Iron, vol. 1, New York, USA, 1991, pp. 241–252.
4. Micro-inhomogeneity of low-alloy austempered ductile cast iron matrix
5. M. Nili-Ahmadabadi, Structural control of 1% Mn ductile cast iron aided by modeling of solidification and austempering processes, Ph.D. thesis, Tohoku University, Japan, 1994.
6. J.R. Davis (Ed.), ASM Specialty Handbook Cast Irons, ASM International Publication, New York, 1996, pp. 192–204.
7. The effect of segregation on the austemper transformation and toughness of ductile irons10.1361/105994998770347864 ↗
8. Microsegregation of manganese and silicon in high manganese ductile iron10.1179/mst.1997.13.10.813 ↗
9. E. Dorazil, High Strength Austempered Ductile Cast Iran, first ed., Ellis Horwood, London, 1991.
10. G. Jolley, L.M. Grad, G.N.J. Gilbert, C. Eng, G. Mesh, Segregation in Nodular Iron and its Influence on Mechanical Properties, The British Foundryman, March 1967, pp. 72–97.
11. The role of manganese and copper in the eutectoid transformation of spheroidal graphite cast iron10.1007/s11661-997-0158-7 ↗
12. Homogenization of multicomponent alloy via partial melting10.1361/105497101770333009 ↗
13. Metals Handbook, vol. 15, ASM International Publication, 1990, pp. 168–185.
14. Austenite liquidus, carbide eutectic and under cooling in process control of ductile base iron
15. Potential applications of cooling curve in ductile iron process control
16. J. Crank, The Mathematics of Diffusion, second ed., Oxford Science Publication, London, 1989.
17. Effect of successive-stage austempering on the structure and impact strength of high Mn ductile iron10.1080/09534962.1992.11819094 ↗
18. TEM study of high temperature bainitic transformation in 1% Mn ductile iron10.1016/0921-5093(94)09652-X ↗