journal article·2004-10

The microstructure and properties of IN718 rings produced by centrifugal spray deposition

M.D. Barratt, A.L. Dowson, M.H. Jacobs

Publisher page

Abstract

Centrifugal spray deposition (CSD) is explored as an alternative route for manufacturing ring-shaped pre-forms for casings in gas turbines. CSD offers metallurgical and economic benefits compared with conventional routes. Research centred on optimising CSD processing to produce nickel alloy rings suitable for thermo-mechanical processing. Alterations to the mass flow-rate and substrate motion produced microstructures characteristic of hot and cold deposits. Hot deposits contained coarse inter-dendritic microstructures and solidification shrinkage. Cold deposits had a banded equiaxed grained microstructure comprising layering, prior droplet boundaries, and inter-splat porosity. Intermediate mass flow-rates created microstructures common to both deposition conditions. Increasing reciprocation speed led to more layering and inter-splat porosity. Slowing reciprocation produced a near optimised microstructure of equiaxed grains, some layering adjacent to the substrate and minimal porosity (≤1.0%). Following thermo-mechanical treatments, tensile properties consistent with commercial specifications were achieved. Improvements in mechanical performance are expected through future process optimisation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Tribology and Lubrication Engineering · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A. Leatham, J. of Metals 51 (4) (1999).
2. T. Tom, in: Proceedings of the Fourth International Conference on Spray Forming, Baltimore, USA, 1999.
3. A.L. Dowson, Spray forming of ring-shaped pre-forms: current limitations, IRC in Materials Processing, The University of Birmingham, 1997 (internal report).
4. Grant · Prog. Mater. Sci. · 1995 · 39 · 49710.1016/0079-6425(95)00004-6 ↗
5. Brooks · Mater. Des. · 2000 · 21 · 29710.1016/S0261-3069(99)00069-2 ↗
6. M. Durand-Charre, The Microstructure of Superalloys, Gordon and Breach, Amsterdam, 1997.
7. J.F. Radavich, Superalloy 718—metallurgy and applications, TMS, 1989, pp. 229–240.
8. A.R.E. Singer, S.E. Kisakurek, Met. Technol (1976) 565–570.10.1179/030716976803391647 ↗
9. A.L. Dowson, M.H. Jacobs, J.M. Young, Y.Y. Zhao, D. Weale, B. Parsons, in: Proceedings of the Third International Conference on Spray Forming, 1996, pp.193–202.
10. A.L. Dowson, M.H. Jacobs, M.D. Barratt, in: Proceedings of the International Conference on Powder Metallurgy and Particulate Materials, New Orleans, USA, 13–17 May 2001.
11. D. Whyman, J.M. Young, M.H. Jacobs, in: Proceedings of Fourth International Conference on Powder Metallurgy in Aerospace, Anaheim, CA, USA, 1995, pp. 147–154.
12. M.H. Jacobs, J.M. Young, AVS International Symposium on Liquid Metals Processing and Casting, Sante Fe, New Mexico, USA, 11–14 September 1994.
13. M.D. Barratt, M.H. Jacobs, A.L. Dowson, in: Proceedings of the International Conference on Powder Metallurgy, New Orleans, USA, 13–17 May 2001, Part III, pp. 168–182.
14. M.H. Jacobs, A.L. Dowson, M.D. Barratt, in: Proceedings of the International Symposium on Spray Forming, University of Bremen, Germany, vol. 6, 2002, pp.1–11.
15. Cantor · Prog. Mater. Sci. · 1997 · 42 · 37310.1016/S0079-6425(97)00033-9 ↗
16. R.M. Ward, A.L. Dowson, M.D. Barratt, M.H. Jacobs, in: Proceedings of the International Symposium on Liquid Metal Processing and Casting, Nancy, France, 21–24 September 2003, pp. 223–232.