journal article·2009-06Open access

Life-time prediction for advanced low alloy steel P23

Philipp von Hartrott, Stefan Holmström, Stefano Caminada, Sylvain Pillot

Abstract

Lifetime models for both creep and thermo-mechanical fatigue are presented for P23 steel. The models are the result of the joint European RFCS project ALoAS. The creep model, developed for robust creep strain modeling, here adjusted to describe the strain response of the ALoAS data, i.e. P23 pipe material fabricated by TenarisDalmine and plate material heat fabricated by Industeel. The creep modeling range covers 550–660 °C in temperature and 80–180 MPa in stress. The thermo-mechanical fatigue model is adjusted to the acquired data on thick walled P23 pipe material fabricated by TenarisDalmine. The load range covers 20–625 °C and up to 16,000 cycles to failure. A good description of the data has been achieved for both creep and fatigue models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Effect of tempering times on creep strength in ASME Gr. 23 (2.25 Cr-1.6 W steel), Materials for Advanced Power Engineering 2006
2. EN 10216-2, 2002+A2: 2007. Technical Delivery Conditions. Part 2. Non-alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties, CEN, Brussels, 2007.
3. J. Granacher, M. Monsees, P. Hillenbrand, C. Berger, in: A.S. Jovanovic (Ed.), SMIRT Post Conference Seminar, No. 13, August 25–27, 1997, Proc., MPA Stuttgart, S. 179–195.
4. ECCC recommendations, Creep data validation and assessment procedures, S.R. Holdsworth et al. (Eds.) ERA Technology publ., 2001 (a) Vol 1: Overview, (b) Vol 2. Terms and Terminology, (c) Vol 3. Data Acceptability Criteria, Data Generation, (d) Vol 4. Data Excange and Collation, (e) Vol 5. Data assessment.
5. S. Holmström, P. Auerkari, Robust prediction of full creep curves from minimal data and time to rupture model, Energy Materials. Institute of Materials, Vol. 1., 2006, No. 4, pp. 249–255.10.1179/174892406X173594 ↗
6. S. Holmström, A. Laukkanen, K. Calonius, Weldment matching for creep life of P22 and P91 girth welds, International Conference on Integrity of High Temperature Welds, 24–26 April 2007, London, UK. Conf. Proc. IOM Communications publication, ISBN-1-86125-166-1. pp. 245–255.
7. Chaboche · Int. J. Plast. · 1989 · 5 · 24710.1016/0749-6419(89)90015-6 ↗
8. Line-search methods in general return mapping algorithms with application to porous plasticity10.1002/nme.2131 ↗
9. H. Heitmann Betriebsfestigkeit von Stahl: Vorhersage der technischen Anrisslebensdauer unter Berücksichtigung des Verhaltens von Mikrorissen, Diss. RWTH Aachen, 1983.
10. Riedel · 1987
11. Schmitt · 2002 · 781
12. C. Schweizer, T. Seifert, M. Schlesinger, H. Riedel, Korrelation zwischen zyklischer Risspitzenöffnung und Lebensdauer, Conference Proceedings of 39. Tagung des DVM-Arbeitskreis Bruchvorgänge, DVM Report 239, Dresden, 2007, pp. 237–246.