The relationship between of fracture behaviors and thermomechanical effects of alloy AA2024 of T3 and T81 temper designations using the center crack tensile test
Source abstract
Abstract
This paper investigates the relationship between the fracture behaviors and the thermomechanical effects of aluminum alloy AA2024 of T3 and T81 temper designations subject to the center crack tensile (CCT) test. The temperature variation on the specimen surface along the crack tip is measured under displacement-controlled loading until the specimen fractures. The results demonstrate that AA2024-T3 and AA2024-T81 specimens yield different fractographs, and the thermomechanical effects lead to different temperature variation trends in the two specimens. The AA2024-T3 fractographs reveal ductile fracture with pop-in lines and necking. Initially, the temperature falls under thermoelastic cooling effects, but then rises with a fluctuating ascent due to the thermoplastic heating and the release of elastic strain energy during pop-in crack extension (PCE). Meanwhile, the AA2024-T81 fractographs indicate brittle fracture with cleavage facets and tearing lines. There is no evidence of either PCE or necking. In contrast to the AA2024-T3 specimen, the temperature of the AA2024-T81 specimen decreases continuously throughout the CCT test under thermoelastic cooling effects. The present results confirm that measuring the temperature variation provides an alternative means of evaluating the fracture behavior of materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Fatigue and fracture mechanics · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Kelvin · Trans. R. Soc. Edinburgh · 1853 · 20 · 26110.1017/S0080456800033172 ↗
2. Sih · Theor. Appl. Fract. Mech. · 1987 · 7 · 7910.1016/0167-8442(87)90022-X ↗
3. Sih · Theor. Appl. Fract. Mech. · 1989 · 12 · 9310.1016/0167-8442(89)90028-1 ↗
4. Sih · Theor. Appl. Fract. Mech. · 1989 · 12 · 10910.1016/0167-8442(89)90029-3 ↗
5. Lee · J. Chin. Mech. Eng. · 1990 · 12 · 481
6. Lee · J. Mater. Sci. · 1991 · 26 · 568510.1007/BF01130102 ↗
7. Lee · Mater. Sci. Eng. · 1999 · A268 · 15410.1016/S0921-5093(99)00069-6 ↗
8. Lee · J. Chin. Mech. Eng. · 2000 · 21 · 293
9. Beghi · Metall. Sci. Tech. · 1984 · 2 · 102
10. Lee · J. Mater. Sci. · 1993 · 28 · 550010.1007/BF00367821 ↗
11. ASTM-E647, 83 Annual Books of ASTM Standards, vol. 03.01, 1985, p. 739.
12. Ritchie · Mater. Sci. Eng. · 1974 · 14 · 710.1016/0025-5416(74)90118-9 ↗
13. Beevers · Metall. Sci. · 1975 · 9 · 11910.1179/030634575790444766 ↗
14. Dong · Acta Metall. Sin. · 1983 · 19 · b-141
15. G.J. Fowler, A.S. Tetelman, in: D.H. Stone, G.G. Knupp (Eds.), Rail Steels—Developments Processing and Use, Philadelphia, PA, ASTM-STP 644 (1978) 363.10.1520/STP27117S ↗
16. Singh · Acta Metall. Mater. · 1991 · 39 · 107310.1016/0956-7151(91)90194-6 ↗
17. T.Y. Kuo, The Study of the Relation Between the Ductile Materials Fracture Behavior and Thermomechanical Effect, Master thesis, National Cheng Kung University, Tainan, Taiwan, 1993.
18. Lee · 1994 · 355
19. H.T. Lee, The Study of Fracture Behavior of High Strength Aluminum Alloys by Thermomechanical Effect, Research Report of Chinese National Council, NSC83-0424-E006-095, 1994.